„Mastech MS6300“ daugiafunkcis aplinkos matuoklis, naudotojo vadovas

1. Įvadas

The Mastech MS6300 is a versatile digital environment multimeter designed to measure various environmental parameters. This device combines the functions of a Sound Level Meter, Luminometer, Relative Humidity Meter, Temperature Meter, Anemometer, and Air Flow Meter into a single, portable unit. It is suitable for a wide range of applications, including environmental monitoring, industrial hygiene, and HVAC system analysis.

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your MS6300 meter. Please read this manual thoroughly before use and keep it for future reference.

2. Saugos informacija

Norėdami užtikrinti saugų skaitiklio naudojimą ir techninę priežiūrą, laikykitės šių nurodymų:

• Read all safety information and operating instructions before using the meter.
• Do not operate the meter if it appears damaged or if the protective casing yra pažeistas.
• Keep the meter away from water, dust, and extreme temperatures.
• Do not attempt to repair or modify the meter. Refer servicing to qualified personnel.
• Jei matuoklis ilgą laiką nenaudojamas, išimkite baterijas, kad išvengtumėte pratekėjimo.
• Tinkamai išmeskite baterijas laikydamiesi vietinių taisyklių.

Akumuliatoriaus sauga

• This device uses one 9V 6F22 battery (not included).
• Įdėdami baterijas atkreipkite dėmesį į teisingą poliškumą.
• Nemaišykite senų ir naujų baterijų arba skirtingų tipų baterijų.
• Nelaikykite baterijų nuo per didelio karščio ar ugnies.

3. Produktas baigtasview

The Mastech MS6300 is designed for ease of use with a clear LCD dual display and intuitive controls. Below are the key components and their functions:

• Windproof Ball: Covers the microphone for sound level measurements.
• Maitinimo jungiklis: Įjungia/išjungia įrenginį.
• Nustatyti mygtukas: Used to select AVG/MAX/MIN/DIF (MAX-MIN) modes.
• Temperatūros ir drėgmės jutiklis: Measures ambient temperature and relative humidity.
• Illumination Button: Activates the light sensor.
• Backlight Button (BL): Toggles the display backlight.
• Wind Speed and Air Volume Sensor: Measures air flow and wind speed.
• LCD ekranas: Shows measurement readings and unit indicators.
• UNIT mygtukas: Changes measurement units (e.g., °C/°F, m/s/knots, LUX/FC, dB(A)/dB(C), CMM/CFM).
• LAIKYMO mygtukas: Įšaldo dabartinį rodmenį ekrane.
• MODE mygtukas: Cycles through different measurement functions (Sound Level, Luminometer, Humidity/Temperature, Anemometer, Air Flow).
• Trikojo tvirtinimas: Located at the bottom for stable placement.

4. Sąranka

4.1 Akumuliatoriaus įdėjimas

1. Suraskite baterijų skyriaus dangtelį matuoklio gale.
2. Atsuktuvu atidarykite akumuliatoriaus skyrių.
3. Insert one 9V 6F22 battery, ensuring the correct polarity (+/-).
4. Uždėkite akumuliatoriaus skyriaus dangtelį ir pritvirtinkite jį varžtu.

Pastaba: Baterijos į gaminį neįeina.

4.2 Pradinis įjungimas

Paspauskite GALIA button to turn on the meter. The LCD display will illuminate, and the meter will perform a self-test before entering the default measurement mode.

5. Naudojimo instrukcijos

5.1 Bendras veikimas

• Maitinimo įjungimas/išjungimas: Paspauskite GALIA mygtuką.
• Foninis apšvietimas: Paspauskite BL mygtuką, kad įjungtumėte arba išjungtumėte ekrano foninį apšvietimą.
• Duomenų sulaikymas: Paspauskite LAIKYTI button to freeze the current reading. Press again to release.
• Režimo pasirinkimas: Paspauskite REŽIMAS button to cycle through the different measurement functions: Sound Level, Luminometer, Humidity/Temperature, Anemometer (Wind Speed), and Air Flow.
• Vieneto pasirinkimas: Kiekvienu režimu paspauskite VIENETAS button to change the measurement units.

5.2 Sound Level Measurement

1. Turn on the meter and select Sound Level mode using the REŽIMAS mygtuką.
2. Paspauskite VIENETAS button to select between dB(A) or dB(C) weighting.
3. Position the microphone towards the sound source.
4. The sound level will be displayed on the LCD.
5. Naudokite NUSTATYTI button to cycle through AVG (Average), MAX (Maximum), MIN (Minimum), and DIF (Difference between MAX and MIN) values.

5.3 Luminance Measurement (Luminometer)

1. Turn on the meter and select Luminometer mode using the REŽIMAS mygtuką.
2. Paspauskite VIENETAS button to select between LUX or FC (Foot-Candle) units.
3. Ensure the light sensor (located near the microphone) is exposed to the light source.
4. The illuminance value will be displayed.
5. Naudokite NUSTATYTI button for AVG/MAX/MIN/DIF values.

5.4 Humidity and Temperature Measurement

1. Turn on the meter and select Humidity/Temperature mode using the REŽIMAS mygtuką.
2. The relative humidity (%RH) and temperature will be displayed simultaneously.
3. Paspauskite VIENETAS button to switch between Celsius (°C) and Fahrenheit (°F) for temperature.
4. Naudokite NUSTATYTI button for AVG/MAX/MIN/DIF values.

5.5 Anemometer (Wind Speed) Measurement

1. Turn on the meter and select Anemometer mode using the REŽIMAS mygtuką.
2. Paspauskite VIENETAS button to select desired wind speed units (m/s, ft/min, knots, km/h, mph).
3. Position the wind speed sensor (fan) directly into the airflow.
4. The wind speed will be displayed.
5. Naudokite NUSTATYTI button for AVG/MAX/MIN/DIF values.

5.6 Air Flow Measurement

1. Turn on the meter and select Air Flow mode using the REŽIMAS mygtuką.
2. Paspauskite VIENETAS button to select between CMM (Cubic Meters per Minute) or CFM (Cubic Feet per Minute).
3. Before measuring air flow, you must input the area of the duct or vent. The meter supports area range 0~999.9m² or 0~999.9ft². Refer to the full manual for detailed instructions on area input.
4. Position the wind speed sensor into the airflow.
5. The air flow rate will be displayed.
6. Naudokite NUSTATYTI button for AVG/MAX/MIN/DIF values.

6. Savybės

• Auto & Manual Ranging: The meter can automatically select the appropriate measurement range or allow manual selection for specific applications.
• Automatinis išsijungimas (APO): To conserve battery life, the meter automatically turns off after a period of inactivity.
• AVG/MAX/MIN/DIF (MAX-MIN): Provides statistical analysis of measurements, showing average, maximum, minimum, and the difference between maximum and minimum readings.
• A / C Weighting Indication: For sound level measurements, allows selection between A-weighting (approximates human ear response) and C-weighting (flat response).
• Duomenų sulaikymas: Įjungia dabartinį rodmenį ekrane, kad būtų lengviau jį įrašyti.
• Ekrano foninis apšvietimas: Illuminates the LCD for clear visibility in low-light conditions.
• Žemo akumuliatoriaus įkrovos rodymas: An indicator on the display warns when the battery level is low, prompting replacement.

7. Specifikacijos

The following table details the technical specifications of the Mastech MS6300 Multifunctional Environment Meter:

Bendrosios specifikacijos:

• Maitinimas: 1x 9V 6F22 Battery
• Produkto dydis: 280mm x 89mm x 50mm / 11.0" x 3.5" x 2.0"
• Produkto svoris: 433 g / 0.95 svaro
• Sertifikatai: CE, RoHS

8. Priežiūra

• Valymas: Nuvalykite matuoklį sausa, minkšta šluoste. Nenaudokite abrazyvinių medžiagų ar tirpiklių.
• Saugykla: Store the meter in a cool, dry place. If storing for an extended period, remove the battery.
• Jutiklio priežiūra:
  • Keep the microphone (windproof ball) clean and free from debris.
  • Įsitikinkite, kad šviesos jutiklis nėra užblokuotas.
  • Keep the wind speed/air volume sensor (fan) clear of any foreign objects to ensure accurate readings.
  • Avoid touching the temperature and humidity sensors directly.
• Baterijos keitimas: Pakeiskite 9 V bateriją, kai ekrane pasirodys išsikrovusios baterijos indikatorius.

9. Problemų sprendimas

• Matuoklis neįsijungia:
  • Check if the battery is installed correctly with the right polarity.
  • Replace the 9V battery with a new one.
• Netikslūs rodmenys:
  • Įsitikinkite, kad jutikliai yra švarūs ir neuždengti.
  • Verify the meter is in the correct measurement mode and units.
  • Allow the meter to stabilize in the environment before taking readings, especially for temperature and humidity.
  • For air flow, ensure the correct area has been input.
• Ekranas blyškus arba mirga:
  • Pakeiskite bateriją.
  • Check if the backlight is activated; deactivate if not needed to save power.

10. Vartotojo patarimai

• Stabilūs matavimai: For best results, especially with wind speed and air flow, use the included tripod to keep the meter stable and ensure the sensor is directly facing the airflow.
• Environmental Acclimation: When moving the meter between environments with significant temperature or humidity differences, allow a few minutes for the sensors to acclimate to the new conditions before taking critical measurements.
• Reguliarus valymas: Periodically clean the wind speed sensor (fan) and light sensor to prevent dust and debris from affecting accuracy.

11. Garantija ir palaikymas

The Mastech MS6300 Multifunctional Environment Meter is designed and manufactured to high-quality standards and is CE and RoHS certified. For any technical support or warranty inquiries, please refer to the contact information provided by your retailer or the official MasTech websvetainę.

Prašome išsaugoti pirkimo kvitą kaip pirkimo įrodymą garantijos tikslais.