TP-LINK Festa FS308G 8-Port Gigabit Smart Switch User Manual

1. Įvadas

The TP-LINK Festa FS308G is an 8-Port Gigabit Smart/Unmanaged Desktop Switch designed to expand your network capacity with high-speed connectivity. Featuring 8 Gigabit Ethernet ports, this switch provides a simple, cost-effective, high-performance, non-disruptive, and standard-compliant upgrade to an old network to a 1000Mbps network. It supports Power over Ethernet (PoE) on all 8 ports, simplifying the deployment of PoE-powered devices such as IP cameras, wireless access points, and VoIP phones.

1 pav.: priekis view of the TP-LINK Festa FS308GP Switch

2. Pakuotės turinys

Before you begin installation, ensure that your package contains the following items:

• TP-LINK Festa FS308G 8-Port Gigabit Smart Switch
• Maitinimo adapteris
• Maitinimo laidas
• Guminės pėdos
• Mounting Kit (for wall-mount or rack-mount, if applicable)
• Greito montavimo vadovas

Figure 2: Switch and Accessories

3. Fizinis aprašymas

3.1 Priekinis skydelis

The front panel features 8 Gigabit Ethernet ports and various LED indicators for status monitoring.

3 pav. Priekinio skydelio išdėstymas

LED indikatoriai:

• Maitinimo šviesos diodas: Nurodo jungiklio maitinimo būseną.
• PoE MAX šviesos diodas: Indicates if the total PoE power budget is nearing or exceeding its limit.
• PoE Status LEDs (per port): Indicates if a port is delivering PoE power.
• Speed/Link/Act LEDs (per port): Indicates link status, activity, and connection speed (e.g., green for Gigabit, amber for 10/100Mbps).
• Atkūrimo mygtukas: Naudojamas gamykliniams numatytiesiems nustatymams atkurti.

3.2 Galinis skydelis

The rear panel includes the power input connector and a grounding screw.

4 pav. Galinio skydelio išdėstymas

4. Sąranka ir diegimas

4.1 Saugos priemonės

• Užtikrinkite maitinimo šaltinio ttage matches the switch's requirements.
• Neuždenkite vėdinimo angų.
• Avoid placing the switch in direct sunlight, near heat sources, or in excessively humid environments.
• Naudokite tik pateiktą maitinimo adapterį.

4.2 Fizinis išdėstymas

The switch can be placed on a desktop, mounted on a wall, or installed in a rack, depending on your needs and the included accessories.

Vieta darbalaukyje:

Place the switch on a flat, stable surface. Attach the included rubber feet to the bottom of the switch to prevent slipping and provide stability.

Montavimas ant sienos:

If wall mounting, use the provided mounting kit. Ensure the wall can support the weight of the switch and connected cables. Mark two points on the wall, drill holes, insert anchors, and secure the mounting screws, leaving a small gap for the switch's mounting slots.

4.3 Jungiklio prijungimas

1. Prijunkite tinklo įrenginius: Connect your network devices (computers, servers, IP cameras, Wi-Fi APs, VoIP phones, etc.) to any of the 8 Gigabit Ethernet ports using standard Ethernet cables. For PoE-powered devices, ensure they are PoE-compatible.
2. Prijunkite prie maitinimo: Connect the provided power adapter to the switch's power input port on the rear panel, then plug the power adapter into a suitable electrical outlet.
3. Patikrinkite galią: Once powered on, the Power LED on the front panel should illuminate.

Figure 5: Basic Network Connection

Figure 6: PoE Connection with IP Cameras

Figure 7: PoE Connection with Wi-Fi Access Points

5. Jungiklio valdymas

The TP-LINK Festa FS308G is an unmanaged switch, meaning it operates plug-and-play without requiring complex configuration. Once connected, it automatically detects network speeds and provides power to connected PoE devices.

5.1 Šviesos diodų būsenos aiškinimas

• Maitinimo šviesos diodas:
  • Įjungta: Jungiklis įjungtas.
  • Išjungta: Jungiklis yra išjungtas.
• PoE MAX šviesos diodas:
  • Įjungta: The total PoE power consumption is at or near the maximum budget.
  • Mirksi: The total PoE power consumption has exceeded the maximum budget, and some PoE ports may be shut down.
  • Išjungta: PoE power consumption is within normal limits.
• PoE Status LEDs (per port):
  • Įjungta: The port is supplying PoE power to a connected device.
  • Išjungta: The port is not supplying PoE power.
• Speed/Link/Act LEDs (per port):
  • Žalia (vientisa): A Gigabit (1000Mbps) link is established.
  • Žalia (mirksi): Data is being transmitted or received at Gigabit speed.
  • Amber (Solid): A 10/100Mbps link is established.
  • Amber (Flashing): Data is being transmitted or received at 10/100Mbps speed.
  • Išjungta: Prie prievado neprijungtas joks įrenginys arba prijungtas įrenginys yra išjungtas.

6. Priežiūra

6.1 Valymas

• Prieš valydami visada atjunkite maitinimą.
• Jungiklio išorę nuvalykite minkštu, sausu skudurėliu.
• Nenaudokite skystų ar aerozolinių valiklių.

6.2 Aplinkosaugos aspektai

• Užtikrinkite tinkamą ventiliaciją aplink jungiklį, kad jis neperkaistų.
• Operate the switch within the specified temperature and humidity ranges (refer to Specifications section).

6.3 Jungiklio nustatymas iš naujo

If the switch is not functioning correctly, you can perform a factory reset. With the switch powered on, use a paperclip or similar pointed object to press and hold the Reset button on the front panel for approximately 5-10 seconds until the LEDs flash. The switch will then reboot with factory default settings.

7. Problemų sprendimas

7.1 Nėra galios

• Įsitikinkite, kad maitinimo laidas yra tvirtai prijungtas prie jungiklio ir maitinimo lizdo.
• Patikrinkite, ar maitinimo lizdas veikia.
• Patikrinkite, ar maitinimo adapteris veikia tinkamai.

7.2 Nėra ryšio / veiklos prievade

• Patikrinkite Ethernet kabelio jungtį abiejuose galuose. Išbandykite kitą kabelį.
• Įsitikinkite, kad prijungtas įrenginys įjungtas ir veikia tinkamai.
• Verify that the network adapter of the connected device is enabled.
• Pabandykite prijungti įrenginį prie kito jungiklio prievado.

7.3 Mažas tinklo greitis

• Įsitikinkite, kad visi prijungti įrenginiai ir kabeliai palaiko gigabito eternetą, kad būtų užtikrintas optimalus našumas.
• Patikrinkite, ar nėra per didelio tinklo srauto arba pralaidumą eikvojančių programų.
• Verify that the Speed/Link/Act LED for the port indicates a Gigabit connection (Green).

7.4 PoE įrenginys negauna maitinimo

• Ensure the connected device is a PoE-compatible device (PD).
• Check the PoE Status LED for the port; it should be On.
• Verify that the total PoE power consumption is not exceeding the switch's budget (check PoE MAX LED). If it's flashing, disconnect some PoE devices or use a higher-power PoE switch.
• Išbandykite kitą Ethernet kabelį.

8. Specifikacijos

8 pav.: Techninės specifikacijos

Figure 9: PoE Budget and Power Consumption

10 pav.: Gaminio matmenys

Figure 11: Environmental Specifications

Generolas

• Prievadai: 8 x 10/100/1000Mbps RJ45 Ports (Auto-Negotiation/Auto MDI/MDIX)
• PoE prievadai: 8 Ports (PoE+)
• PoE standartas: Suderinamas su IEEE 802.3af/at
• PoE energijos biudžetas: Refer to Figure 9 for detailed budget.
• Perjungimo talpa: 16 Gbps
• Paketų persiuntimo greitis: 11.9 Mps
• MAC adresų lentelė: 4K įrašai
• Jumbo rėmas: 9KB
• Maitinimas: External Power Adapter (Output: 53.5VDC / 1.31A)
• Matmenys (P x G x A): Refer to Figure 10 for detailed dimensions.

Aplinkosaugos

• Darbinė temperatūra: nuo 0°C iki 40°C (32°F iki 104°F)
• Laikymo temperatūra: -40°C iki 70°C (nuo -40°F iki 158°F)
• Darbinė drėgmė: Nuo 10% iki 90% nekondensuojantis
• Laikymo drėgmė: Nuo 5% iki 90% nekondensuojantis

Sertifikatai

• CE, FCC, RoHS

Figure 12: Certifications

9. Vartotojo patarimai

• For optimal performance, use high-quality Cat5e or Cat6 Ethernet cables for all connections.
• When connecting PoE devices, ensure the total power consumption does not exceed the switch's PoE budget to avoid unexpected shutdowns or instability.
• Place the switch in a location with good airflow to prevent overheating, especially if many PoE devices are connected.
• If experiencing network issues, a simple power cycle of the switch and connected devices can often resolve temporary glitches.

10. Garantija ir palaikymas

TP-LINK provides a limited warranty for this product. Please refer to the official TP-LINK website or the warranty card included in your package for detailed warranty terms and conditions specific to your region.

Techninė pagalba

For technical support, firmware updates, and additional resources, please visit the official TP-LINK support websvetainė. Paprastai ten galite rasti DUK, trikčių šalinimo vadovus ir klientų aptarnavimo kontaktinę informaciją.

Figure 13: TP-LINK SMB Warranty Information

Figure 14: TP-LINK After-Sales Information