Įvadas
Thank you for choosing the Kemei KM-1990 Professional Hair Clipper. This manual provides detailed instructions for the safe and effective use, maintenance, and care of your new hair clipper. Please read this manual thoroughly before first use and keep it for future reference.
The Kemei KM-1990 is a versatile electric trimmer designed for professional and home use, featuring a powerful motor, patented angular blade, and an intuitive LCD display for battery status and turbo mode.
Pakuotės turinys
Atidarę pakuotę, patikrinkite, ar yra visi toliau išvardyti daiktai ir ar jie yra geros būklės:
- Kemei KM-1990 Hair Clipper
- Įkrovimo kabelis
- Valymo šepetys
- Tepimo alyva
- Kreipiančios šukos (įvairių dydžių)
- Hairdressing Cape
- Scissors (hair cutting and thinning)
- Vartotojo vadovas (šis dokumentas)
For a visual guide to the package contents, please watch the unboxing video below:
Sąranka ir pradinis naudojimas
1. Kirpimo mašinėlės įkrovimas
The Kemei KM-1990 hair clipper is rechargeable and can be used cordlessly. Before first use, or when the battery indicator on the LCD display shows low charge, fully charge the device.
- Connect the charging cable to the clipper and a suitable power adapter (AC 110-240V, 50-60Hz).
- LCD ekrane bus rodoma įkrovimo eiga.
- A full charge takes approximately 3 hours. The clipper can work for about 120 minutes after a full charge.
2. Blade Alignment (Factory Set)
Your shears are carefully inspected to ensure that the blades are oiled and aligned before they leave the factory. If the blades are removed for cleaning or replacement, they must be re-aligned. To re-align:
- Simply match the top and bottom blade teeth point to point upwards.
- The ends of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade.
- Compare your scissor blades with the provided sketch (if available).
- If the blades are not aligned correctly, put a few drops of oil on the blades, turn the shears open for a while, close, and unplug them.
- Loosen the screw slightly and make adjustments until the blades are aligned, then tighten the screw.
3. Kreipiamųjų šukų pritvirtinimas
Select the desired guide comb for your preferred cutting length. The clipper comes with various sizes, including 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 19mm, and 25mm.
- Įsitikinkite, kad kirpimo mašinėlė yra išjungta.
- Sulygiuokite kreipiamąsias šukas su kirpimo mašinėlės peiliuku ir tvirtai stumkite, kol jos užsifiksuos.
- Norėdami nuimti, švelniai patraukite šukas nuo peiliuko.
Naudojimo instrukcijos
1. Įjungimas / išjungimas ir režimo pasirinkimas
- Norėdami įjungti arba išjungti kirpimo mašinėlę, paspauskite maitinimo mygtuką.
- The LCD display will show the battery percentage and current mode.
- The clipper features a powerful motor with both Standard and Strong (Turbo) modes. Use the appropriate button to switch between modes as needed for different hair types or cutting tasks.
2. Hair Cutting Techniques
The Kemei KM-1990 is suitable for various cutting styles, including wet and dry haircuts, electric length adjustment, sculpting, pushing white, and gradual trimming.
- Visada pradėkite nuo ilgesnių kreipiamųjų šukų, nei manote, kad jums reikia, ir palaipsniui mažinkite ilgį.
- Laikykite kirpimo mašinėlę prispaustą prie galvos ir lėtai judinkite ją prieš plaukų augimo kryptį.
- For detailed work or fading, use the clipper without a guide comb, adjusting the blade lever for precise cutting lengths (1.1mm - 2mm minimum cutting length).
- The clipper features automatic power selection based on bristle density, ensuring consistent performance.
Priežiūra ir priežiūra
1. Peilių valymas
- Po kiekvieno naudojimo išjunkite kirpimo mašinėlę ir nuimkite kreipiamąsias šukas.
- Norėdami pašalinti palaidus plaukus nuo peiliukų, naudokite pridedamą valymo šepetėlį.
- The blades are designed for washing under water. You can rinse the blade assembly under running water. Ensure the clipper body is not submerged.
- Prieš vėl pritvirtindami arba padėdami į vietą, leiskite peiliukams visiškai išdžiūti.
2. Peilių sutepimas alyva
To keep your shears in top condition, the blades should be oiled every few haircuts. To oil it properly:
- Ensure the clipper is clean and dry.
- Apply a few drops of the provided lubricating oil across the top of the blades.
- Įjunkite plaukų kirpimo mašinėlę kelioms sekundėms, kad aliejus tolygiai pasiskirstytų.
- Minkšta šluoste nuvalykite aliejaus perteklių.
3. Sandėliavimas
Kirpimo mašinėlę laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir drėgmės. Laikykite vaikams nepasiekiamoje vietoje.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Kirpimo mašinėlė neįsijungia. | Žema akumuliatoriaus įtampa arba jis neįkrautas. | Charge the clipper fully (approx. 3 hours). Ensure the charging cable is properly connected. |
| Kirpimo mašinėlė raukia plaukus arba kerpa netolygiai. | Blades are dull, dirty, or misaligned. Insufficient oil. | Clean and oil the blades. Check blade alignment and adjust if necessary. If blades are dull, consider replacement. |
| Kirpimo mašinėlė veikia lėtai arba sumažinta galia. | Low battery or hair buildup in the motor. | Charge the clipper. Clean the blades and ensure no hair is obstructing the motor area. |
If you encounter issues not listed here, please refer to the full user manual PDF or contact customer support.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelis | KM-1990 |
| Maitinimo šaltinis | Rechargeable (Mains and battery operation) |
| Galia | 5W |
| ttage | AC 110-240V (<20V internal operating voltage) |
| Dažnis | 50-60Hz |
| Akumuliatoriaus įkrovimo laikas | Approx. 3 hours (up to 2 hours mentioned in product properties) |
| Battery Life / Use Time | Approx. 120 minutes (over 90 minutes mentioned in product properties) |
| Ašmenų medžiaga | Nerūdijantis plienas |
| Variklio tipas | ROTARY |
| Funkcijos | Electric length adjustment, wet haircut, dry haircut, automatic power selection based on bristle density, washing knives under water, fast charging, charging indication |
| Minimalus pjovimo ilgis | 1.1–2 mm |
| Maksimalus pjovimo ilgis | 11–20 mm |
| Ilgio reguliavimo metodas | Purkštukų keitimas |
| Purkštukų skaičius | 5 ar daugiau vienetų |
| Tikslas | For beard and mustache, for the head |
| Medžiaga | ABS + metalas |
| Sertifikatai | 3C, CE, CCC |
Garantija ir palaikymas
The following guarantees are offered for the product:
- The product is manufactured and inspected through strict quality control.
- If a fault occurs during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair centre in accordance with the warranty card. (Batteries and blades are consumables and are not included in the warranty and are subject to payment).
Free service will not be provided in the following cases:
- Damage caused by unapproved repairs or alterations.
- Damage caused by incorrect or negligent use or accident.
- Damage caused by natural disasters or voltage anomalijos.
- Due to neglect of product specifications.
For more detailed information, please refer to the official user manual PDF: Kemei KM-1990 User Manual (PDF)
Naudotojo patarimai
- Pre-trimming: For very long hair, it's often helpful to trim it roughly with scissors before using the clipper to avoid clogging and ensure a smoother cut.
- Švara yra svarbiausia: Regularly clean and oil your clipper blades to maintain sharpness and prolong the life of the device. This prevents pulling and ensures a smooth cut.
- Akumuliatoriaus valdymas: Keep an eye on the LCD battery display. Charging the clipper before it completely drains can help maintain battery health over time.
- Experiment with Guards: Don't be afraid to try different guide comb sizes to find the perfect length for your desired style.
