1. Įvadas
The HGLRC F405 8S V1 Flight Controller is a high-performance flight control unit designed for FPV (First Person View) crossover aircraft and racing drones. It features an advanced gyroscope, powerful CPU, and modular plug-and-play connectivity, making it suitable for aggressive flying and easy integration into your drone build. This manual provides essential information for the safe and effective use of your flight controller.
2. Saugos informacija
⚠ ĮSPĖJIMAS: Šis produktas gali jus paveikti cheminėmis medžiagomis, įskaitant ftalatus (DEHP), kurie, kaip žinoma Kalifornijos valstijoje, sukelia vėžį, apsigimimus ar kitokią reprodukcinę žalą. Daugiau informacijos rasite adresu www.P65Warnings.ca.gov.
- Always ensure proper insulation and secure connections to prevent short circuits.
- Operate FPV drones responsibly and in accordance with local regulations.
- Keep the flight controller away from moisture, extreme temperatures, and static electricity.
- Do not attempt to modify the hardware beyond the intended use.
3. Pakuotės turinys
Patikrinkite pakuotę, ar joje yra šie daiktai:
- 1x HGLRC F405 8S V1 FC
- 1x SH1.0 8PIN Cable
- 1x SH1.0 6PIN Cable
- 1x SH1.0 4PIN Cable
- 1x SH1.0 3PIN Cable
- 1x C tipo USB laidas
- 1x lipdukas
- 4x M2 Shock Absorbing Balls
4. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Produkto pavadinimas | HGLRC F405 8S V1 FC |
| MPU (Gyroscope) | ICM42688P (with reserved MPU6000 pad) |
| CPU | STM32F405 |
| Įvesties tomastage | 3-8S Lipo |
| Built-in Ammeter | 220A |
| BEC | 5V/2A, 9V/2A |
| Juodoji dėžė | 16 MB |
| Firmware | HGLRCF405V1 |
| UART prievadai | 5 |
| OSD | Palaikymas |
| Montavimo angos | 20 x 20 mm, M2 |
| Matmenys | 30x30mm (Size), 12.5mm (Height) |
| Svoris | 4.7g |
| Medžiaga | Sudėtinė medžiaga |
| Kilmė | Žemyninė Kinija |
| Rekomenduojamas amžius | 14+ metų |
| Naudokite | Transporto priemonės ir nuotolinio valdymo žaislai |
5. Pagrindinės savybės
- High-Performance Gyroscope: Equipped with the ICM42688P gyroscope for enhanced stability and precise flight control, with a reserved MPU6000 gyroscope pad for future upgrades.
- Galingas apdorojimas: Utilizes the STM32F405 CPU for fast and reliable operation.
- 8S High-Voltage Pagalba: Designed to handle 3-8S Lipo input, enabling aggressive and powerful flight performance.
- Modular Plug & Play: Features full module direct plug-in connections, eliminating the need for soldering pads and simplifying installation.
- Integruota juodoji dėžė: Includes a 16MB large-capacity black box to ensure sufficient flight data can be recorded for analysis and tuning.
- Built-in Ammeter: Comes with a 220A built-in ammeter for accurate current monitoring.
- Dual BEC: Provides stable 5V/2A and 9V/2A BEC outputs for powering peripherals.
- OSD palaikymas: Integrated OSD (On-Screen Display) for real-time flight data visualization.
6. Sąranka ir diegimas
6.1 Fizinis įrengimas
- Mount the HGLRC F405 8S V1 FC onto your drone frame using the provided M2 shock-absorbing balls. The mounting holes are 20x20mm.
- Ensure the flight controller is oriented correctly according to your flight software's settings (e.g., Betaflight, ArduPilot).
6.2 Sujungimo schema
The HGLRC F405 8S V1 FC supports direct plug-in connections for various modules, simplifying the wiring process. Refer to the detailed wiring diagram below for connecting your ESCs, receiver, VTX, camera, GPS, and other peripherals.
Pagrindinės jungtys:
- BAT/G: Main battery input and ground.
- M1-M8: Motor outputs for ESCs.
- CURR: Current sensor input.
- 5V/G: 5V power and ground for peripherals.
- CAM1/CAM2: Camera inputs.
- VTX: Video transmitter connection.
- SBUS/RX/TX: Receiver connections (SBUS, Serial RX/TX).
- LED/BUZ: LED strip and buzzer connections.
- 3.3V: 3.3V power output.
- BOOT: Bootloader button for firmware flashing.
- USB-C prievadas: Skirta prijungti prie kompiuterio konfigūracijai.
Always double-check your wiring against the diagram and your component manuals before powering on the flight controller.
7. Naudojimo instrukcijos
7.1 Programinės įrangos perprogramavimas ir konfigūravimas
- Connect the flight controller to your computer using the provided Type-C USB cable.
- Open your preferred flight control configurator software (e.g., Betaflight Configurator).
- Select the correct firmware target (HGLRCF405V1) and flash the latest stable firmware.
- Configure your receiver, ESCs, OSD, and other settings according to your drone build and preferences.
- Kalibruokite akselerometrą ir giroskopą.
7.2 Priešskrydiniai patikrinimai
- Įsitikinkite, kad visos jungtys yra saugios ir teisingos.
- Verify motor direction and propeller orientation.
- Check receiver inputs and flight modes in the configurator.
- Atlikite radijo sistemos diapazono patikrinimą.
7.3 Skrydis
Once all checks are complete, you can proceed with arming your drone and flying. Start with gentle maneuvers to ensure everything is functioning as expected.
8. Priežiūra
- Regularly inspect the flight controller for any signs of physical damage, loose connections, or corrosion.
- Keep the board clean and free from dust and debris. Use compressed air or a soft brush if necessary.
- Ensure proper ventilation around the flight controller to prevent overheating.
- Periodically check for and update to the latest stable firmware version for optimal performance and bug fixes.
9. Problemų sprendimas
- Nėra galios: Check battery connections, power leads, and ensure the input voltage is within the 3-8S Lipo range.
- No Signal from Receiver: Verify receiver wiring (SBUS, RX/TX), ensure the receiver is bound to your radio, and check receiver settings in the flight configurator.
- Varikliai nesisuka: Check ESC connections, motor wiring, and ensure ESCs are calibrated. Verify motor outputs in the configurator.
- Nestabilus skrydis: Re-calibrate accelerometers and gyroscopes. Check for loose components or vibrations. Review PID settings.
- OSD Not Displaying: Ensure OSD is enabled in the configurator and video connections (camera, VTX) are correct.
- Black Box Data Issues: Ensure the black box is enabled and configured to record data in your flight software.
10. Vartotojo patarimai
- Utilize the 16MB black box for detailed flight log analysis to fine-tune your drone's performance and diagnose issues.
- Paimk advanątage of the modular plug-and-play design to quickly swap out components or upgrade without extensive soldering.
- For optimal performance with 8S setups, ensure all other components (ESCs, motors) are rated for high voltage.
11. Garantija ir palaikymas
Dėl garantijos pretenzijų, techninės pagalbos ar papildomos pagalbos susisiekite tiesiogiai su pardavėju arba gamintoju. Išsaugokite pirkimo įrodymą, jei kiltų kokių nors su garantija susijusių klausimų.
