1. Įvadas
The AODELAN E7G is an advanced wireless flash trigger and transceiver designed to provide professional photographers with efficient and precise control over their lighting setups. Featuring a user-friendly interface with dedicated buttons for every function, the E7G eliminates complex menu navigation, allowing for direct control without layered menus. It supports ultra-long range transmission up to 650 feet (200 meters) and offers 32 channels across 5 independent groups for anti-interference stability in various professional scenes. Beyond flash triggering, the E7G can also function as a remote camera shutter release, offering versatile utility for your photography needs.
2. Pagrindinės savybės
- Direct Control Interface: No layered menus; 1 button = 1 function for quick adjustments.
- Itin ilgas nuotolis: Reliable wireless transmission up to 650 feet (200 meters).
- Kelių grupių valdymas: Manages 5 independent lighting groups (A-E).
- Anti-trukdymas: 32 channels with 99 IDs (1-99) to prevent interference.
- Platus suderinamumas: Works with Godox 2.4G Wireless X System and Flashpoint 2.4GHz R2 Radio Remote System.
- Transceiver Functionality: Can act as both a trigger (TX) and a receiver (RX).
- Remote Shutter Release: Functions as a wired or wireless camera shutter release.
- Dvi maitinimo parinktys: Powered by 2 AAA batteries or external USB Type-C power.
- Atnaujinama programinė įranga: USB Type-C port for continuous optimization.
- Single-Contact Hot Shoe: Compatible with most DSLRs and Mirrorless cameras with a standard ISO hot shoe.
3. Sąranka
3.1 Powering the E7G
The E7G offers two methods for power supply:
- AAA baterijos: Open the battery compartment and insert two (2) AAA 1.5V batteries. This option provides portability for on-the-go shooting.
- External USB Type-C Power: Connect the E7G's USB Type-C port to an external power source. This is ideal for non-stop studio work and can power the device even without batteries.
3.2 Tvirtinimas prie kameros
The E7G features a single-contact hot shoe mount. Simply slide the E7G onto your camera's hot shoe until it clicks into place. Ensure it is securely fastened. This universal design is compatible with most DSLRs and Mirrorless cameras that have a standard ISO hot shoe interface.
3.3 Initial Flash Connection
For flashes with built-in radio systems (Godox 2.4G Wireless X or Flashpoint 2.4GHz R2), ensure your flash unit is set to the appropriate receiving mode and channel/group to match the E7G. For older flashes without built-in radio systems, connect the E7G's OUT connector to the sync port of the flash unit and set the E7G to Receive mode (RX).
4. Naudojimo instrukcijos
4.1 Mygtukų funkcijos
- Maitinimo mygtukas: Press and hold to turn the E7G on or off.
- TEST mygtukas: Press to manually transmit a sync signal to trigger the flash unit to fire, verifying communication.
- Grupės mygtukai (A/B/C/D/E): Press to select the desired flash group for control.
- Modelio mygtukas: Press to turn the modeling light of the selected flash unit(s) on/off.
- Buzz Button: Press to turn on/off the beep sound of the flash unit(s) being controlled when it is fully recycled.
- Skambinkite: Turn to adjust the flash power for the selected group.
- Centrinis mygtukas: Press to enter the menu display of the E7G for advanced settings.
4.2 Transmit/Receive Mode Switching
The E7G can operate in two modes: Transmitting (TX) and Receiving (RX). You can switch between these modes via the menu or dedicated controls (refer to the screen interface for current mode). TX mode is used when the E7G is mounted on your camera to trigger remote flashes. RX mode is used when the E7G acts as a receiver for an older flash unit or as part of a wireless shutter release system.
4.3 Adjusting Flash Power and Group Settings
The OLED screen displays data in real-time, including channel, ID number, power value, and grouping status. Use the Group buttons (A-E) to select the desired group, then turn the Dial to adjust the flash power for that specific group. This allows for individual power adjustments across multiple flash units for richer light and shadow layering.
4.4 Remote Camera Shutter Release
The E7G can be used to trigger your camera's shutter remotely:
-
Wired Shutter Release (One E7G):
Set one E7G to Receive mode (RX). Connect the IN port of the E7G (RX) to the shutter remote terminal on your camera using an appropriate shutter cable (sold separately). Press and hold the TEST button on the E7G (RX) to release the camera shutter.
-
Wireless Shutter Release (Two E7G units):
Set one E7G to Transmit mode (TX) and another to Receive mode (RX). Ensure both E7G units are set to the same channel. The E7G (RX) can be connected to the camera's shutter terminal. Press and hold the TEST button on the E7G (TX) to wirelessly release the camera shutter.
4.5 Programinės aparatinės įrangos atnaujinimas
The E7G's USB Type-C port can also be used for firmware upgrades. Visit the AODELAN official website for the latest firmware and instructions to continuously optimize product features and user experience.
5. Suderinamumas
The E7G is compatible with Godox 2.4G Wireless X System and Flashpoint 2.4GHz R2 Radio Remote System. It primarily supports sync triggering and manual adjustment; TTL (Through The Lens) and HSS (High-Speed Sync) are NOT supported.
5.1 Godox Compatibility List
- Studio Flashes: SK400II/SK300II, SK400IIV, SK300IIV, SG400IIV, MS300, MS300V, MS200, MS200V, QTII Series (QT1200IIM/QT600IIM/QT400IIM), QTIII Series (QT400IIIM/QT600IIIM/QT1200IIIM), DPIII Series (DP400III/DP600III/DP800III/DP1000III), QSII Series (QS400II/QS600II/QS800II/QS1200II), GSII Series (GS200II/GS300IIGS400II)
- Outdoor Flashes: AD100Pro, AD200, AD200ProII, AD300Pro, AD360II, AD400ProII, AD400Pro, AD600, AD600B, AD600BMII, AD600Pro, AD600ProII, AD1200Pro
- On Camera Flashes: V1, V1Pro, V100, V350, V480, V850III, V860III, TT350, TT350P, TT600, TT600s, TT685, TT685II
5.2 Flashpoint Compatibility List
- Studio Flashes: XPLOR 100 Pro, 300 Pro, XPLOR 400 Pro II, 400 Pro, 400, XPLOR 600 Pro II, 600 Pro, 600, XPLOR Power 1200 Pro, XPLOR Power 2400 Pro, eVOLV 200 Pro II, 200 Pro, 200, Studio Pro 1000 III-V, 800 III-V, 600 III-V, Studio Pro 400 III-V, Studio 400 II-V, 400, Studio 300 II-V, 300, Rapid 400, 400 II, 600, 600 II, 1200, 1200 II, BLAZ 300-V, BLAZ 200-V, Streaklight 360.
- On Camera Flashes: Zoom Li-on, Zoom Li-on Mini, Zoom Li-on Compact, Zoom Li-on X, Zoom Li-on X PRO, Zoom-Mini, Zoom X, Zoom II AA, Zoom Li-on III, Zoom, X100, iT30Pro, iT20, FlashBack Lux Master Retro.
Note: For older flash units (without built-in radio systems) or flash units from other brands, synchronization can be achieved by connecting to the E7G in receiving mode (RX) via the sync port.
6. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Dažnis | 2.4 GHz |
| Darbinis diapazonas | Iki 200 m (650 pėdų) |
| Kanalas | 32 channels (1-32) |
| Channel Expansion ID | OFF, 99 IDs (1-99) |
| Grupė | 5 grupės (AE) |
| Maitinimo šaltinis | Two AAA 1.5V batteries / Supplied by an external power supply (when the USB Type-C connector is connected to an external power supply) |
| Maks. sinchronizavimo greitis | 1/250 sec (differences may exist among different cameras) |
| Jungtis | Hot shoe mounting foot x1, Ø3.5 mini jack x2 (IN connector x1, OUT connector x1), USB Type-C connector x1 |
| Ekranas | OLED screen, 1.3" |
| Naudojimo aplinka | Temperature: 0°C to 40°C (32°F to 104°F), Humidity: 80% or lower |
| Matmenys | Approx. 92x57x40 mm (3.6x2.2x1.6 in.) |
| Svoris | Approx. 77 g (2.7 oz.) (excluding battery) |
| Priedas | USB Type-C (A-C) cable x1, length approx. 0.5m (1.6 ft.); Flash sync cable (Ø3.5-3.5 mini plug) x1, length approx. 0.3m (1.0 ft.); Strap x1 |
7. Problemų sprendimas
- Blykstė neveikia:
- Ensure the E7G and flash unit(s) are powered on.
- Verify that the E7G and flash unit(s) are set to the same channel and group.
- Check battery levels in the E7G and flash unit(s).
- Ensure the E7G is securely mounted on the camera's hot shoe.
- Press the TEST button on the E7G to confirm signal transmission.
- Trikdžių problemos:
- Change the channel on both the E7G and flash unit(s).
- Utilize the Channel Expansion ID feature to further isolate your signal.
- Ensure no other 2.4GHz devices are operating nearby on conflicting frequencies.
- Remote shutter release not working:
- For wired release, ensure the cable is correctly connected to the E7G's IN port and the camera's remote terminal.
- For wireless release, confirm both E7G units are powered, set to the same channel, and the RX unit is connected to the camera.
- Check camera settings for external trigger compatibility.
- E7G not responding:
- Replace AAA batteries or connect to an external USB Type-C power source.
- Perform a factory reset if available (refer to the full manual for specific instructions, if applicable).
8. Vartotojo patarimai
- Patikrinkite suderinamumą: The E7G is confirmed to work well with Nikon cameras and Godox V860III flashes, among others listed in the compatibility section. Always verify your specific flash model against the provided lists.
- Optimizuoti diapazoną: For maximum range (up to 200m), ensure there are no significant obstructions between the E7G and your flash units. Open outdoor environments provide the best signal transmission.
- Akumuliatoriaus valdymas: Carry spare AAA batteries for portable use, or utilize the USB Type-C port for continuous power during studio sessions to avoid interruptions.
- Firmware atnaujinimai: Regularly check the AODELAN websvetainę, kurioje rasite programinės įrangos atnaujinimus, kad būtų užtikrintas optimalus našumas ir prieiga prie naujų funkcijų.
9. Garantija ir palaikymas
AODELAN products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official AODELAN websvetainėje arba susisiekite su įgaliotuoju pardavėju. Išsaugokite pirkimo įrodymą, jei prireiktų garantijos.
