1. Įvadas
The TOOLTOP ET271 is an advanced Solar MPPT Power Tester designed for efficient and accurate measurement of photovoltaic modules. It provides essential data such as Maximum Power (Pmax), Open Circuit Voltage (Voc), and Short-Circuit Current (Isc), making it an indispensable tool for solar panel installation, maintenance, and performance evaluation. With its high-power testing capability up to 2000W and comprehensive protection features, the ET271 ensures reliable and safe operation.
2. Saugos informacija
Please read and understand all safety warnings and operating instructions before using the ET271 tester. Failure to do so may result in injury or damage to the device.
- Per ttage Apsauga: The tester has a test range of 3-90V. If the input voltage exceeds 90V, the display will show "overvoltage". Disconnect immediately.
- Apsauga nuo srovės: The tester has a test range of 0-40A. If the input current exceeds 40A, the display will show "overcurrent". Disconnect immediately.
- Apsauga nuo temperatūros: If the internal temperature exceeds 260°C, the display will show "over temperature". Allow the device to cool down before further use.
- Apsauga nuo atvirkštinio poliškumo: The instrument is designed with reverse polarity protection. If the positive and negative poles are reversed during connection, the instrument will not display any readings, preventing damage. Correct the connection before proceeding.
- Apsauga nuo viršįtampių: If the input power exceeds the rated range (2000W), disconnect the device. Use within the specified power limits.
- Ensure all connections are secure before initiating any tests.
- Nebandykite ardyti ar modifikuoti įrenginio.
- Saugokite įrenginį nuo vandens, drėgmės ir ekstremalių temperatūrų.
3. Pakuotės turinys
Gavę siuntinį, patikrinkite jo turinį, kad įsitikintumėte, jog visi daiktai yra nepažeisti ir nepažeisti:
- 1 x TOOLTOP ET271 Solar MPPT Tester
- 1 x Solar Test Clip (Kelvin clamps)
- 1 x USB laidas (C tipo įkrovimo laidas)
- 1 x saugojimo krepšys
- 1 x angliškas vartotojo vadovas
4. Produktas baigtasview
4.1. Įrenginio išdėstymas
4.2. Ekrano sąsaja
The ET271 features a 3.2-inch TN LCD screen that clearly displays all measurement parameters simultaneously.
- Pmax: Didžiausia galia
- Vmppt: Max Power Point Voltage
- Imppt: Max Power Point Current
- Vopen: Open Circuit Voltage
- Ishort: Trumpojo jungimo srovė
4.3. Pagrindinės savybės
- Maksimalios galios taško sekimas (MPPT)
- Test Record Function
- Apsauga nuo perkaitimo
- Per ttage Apsauga
- Apsauga nuo atvirkštinio poliškumo
- Apsauga virš srovės
- Apsauga nuo per didelio maitinimo
- Integruotas žibintuvėlis
- 3.2-inch LCD TN Screen
- C tipo įkrovimas
- Built-in Lithium Cell (1250mAh)
- Automatinio išjungimo funkcija
5. Specifikacijos
| Parametras | Vertė |
|---|---|
| Modelis | ET271 |
| Ekranas | 3.2 inches LCD TN (55*57mm) |
| Saulės ttage | 3~90.00V / ±1.5%+5 |
| Solar Current | 0~40.00A / ±1.5%+5 |
| Solar MPPT Power | 0~2000W / ±1%+5 |
| SampLing Point | 200 digit group |
| Duomenų įrašas | 30 komplektai |
| Sąsaja | DB9 |
| Apsaugos ypatybės | Per ttage, Over Current, Reverse Polarity, Over Temperature, Low Battery Detection, Auto Power Off |
| Darbo aplinkos temperatūra | 0-40°C |
| Darbo aplinkos drėgmė | 0~30°C: ≤75%, 30~40°C: ≤50% |
| Laikymo aplinkos temperatūra | -10-50°C |
| Laikymo aplinka Drėgmė | ≤50 % |
| Baterija | Built-in 1250mA.H rechargeable lithium battery |
| Maitinimo įvestis | 5V/2A/10W or higher (charger not included) |
| Matmenys | 140 mm (aukštis) x 80 mm (plotis) x 30 mm (aukštis) |
6. Sąranka
6.1. Įrenginio įkrovimas
The ET271 comes with a built-in 1250mAh rechargeable lithium battery. Before first use, or when the low battery indicator appears, charge the device using the provided USB Type-C cable and a 5V/2A/10W or higher USB charger (charger not included).
- Connect the USB Type-C cable to the charging port on the ET271.
- Connect the other end of the USB cable to a suitable USB power adapter.
- Įkrovimo indikatorius ant įrenginio rodys įkrovimo būseną.
6.2. Connecting Test Clips
The ET271 uses Kelvin clamps for rapid and secure connections to solar panels or modules.
- Ensure the ET271 is powered off before making connections.
- Connect the red Kelvin clamp to the positive (+) terminal of the solar panel/module.
- Connect the black Kelvin clamp to the negative (-) terminal of the solar panel/module.
- Ensure connections are firm and secure to prevent inaccurate readings or disconnections during testing.
7. Naudojimo instrukcijos
7.1. Įjungimas/išjungimas
- Press and hold the 'MODE' button to power on the device.
- The device supports an auto power-off function to conserve battery.
7.2. MPPT Test Modes
The ET271 supports both automatic and manual MPPT testing modes.
7.2.1. Automatic MPPT Test
- Ensure the solar panel/module is connected correctly.
- Press the 'TEST' button to initiate an automatic MPPT test.
- The device will automatically scan and determine the maximum power point, displaying Pmax, Vmppt, Imppt, Vopen, and Ishort.
- The test data is automatically recorded after completion.
7.2.2. Manual MPPT Test
- Ensure the solar panel/module is connected correctly.
- Press the 'MODE' button to switch to manual test mode (if available, or follow specific manual mode instructions in the device's on-screen menu).
- Follow the on-screen prompts to perform a manual scan or adjust parameters.
- The device will display the measured values.
7.3. Data Recording and Recall
The ET271 can store up to 30 sets of test data. MPPT test data is automatically recorded after completion and can be viewed even after restarting the device.
- After a test is completed, the data is automatically saved.
- Press the 'RECALL' button to access the stored test records.
- Use the navigation buttons (if present, or 'MODE' button for cycling) to browse through the saved data sets.
7.4. Žibintuvėlio naudojimas
The ET271 includes a built-in flashlight for convenience in low-light environments.
- Locate the flashlight button (refer to the Product Overview diagrama).
- Press the button to turn the flashlight on/off.
8. Priežiūra
8.1. Valymas
- Nuvalykite prietaisą minkšta, sausa šluoste.
- Nenaudokite abrazyvinių valiklių ar tirpiklių.
8.2. Sandėliavimas
- Store the ET271 in the provided storage bag when not in use to protect it from dust and physical damage.
- Store in a cool, dry place with temperatures between -10°C and 50°C and humidity below 50%.
- Venkite ilgalaikio tiesioginių saulės spindulių ar ekstremalių temperatūrų poveikio.
8.3. Akumuliatoriaus priežiūra
- Reguliariai įkraukite akumuliatorių, net jei įrenginys nėra dažnai naudojamas, kad palaikytumėte jo būklę.
- Venkite ilgesnį laiką visiškai iškrauti bateriją.
9. Problemų sprendimas
If you encounter issues with your ET271, refer to the following common problems and solutions:
- Įrenginys neįsijungia: Įsitikinkite, kad akumuliatorius įkrautas. Prijunkite įrenginį prie įkroviklio ir bandykite dar kartą.
- No display/readings: Check if the test clips are connected correctly (red to positive, black to negative). The device has reverse polarity protection and will not display if connections are incorrect.
- "Overvoltage" displayed: Įvesties ttage from the solar panel exceeds 90V. Disconnect immediately and ensure the panel's Voc is within the tester's specified range (3-90V).
- "Overcurrent" displayed: The input current exceeds 40A. Disconnect immediately and ensure the panel's Isc is within the tester's specified range (0-40A).
- "Over temperature" displayed: The device's internal temperature is too high. Power off the device and allow it to cool down in a well-ventilated area before resuming use.
- Netikslūs rodmenys: Ensure test clips are making good contact with the terminals. Clean the terminals if necessary. Verify the solar panel is receiving adequate sunlight for testing.
10. Garantija ir palaikymas
Dėl garantijos informacijos ir techninės pagalbos žr. pirkimo metu pateiktus dokumentus arba susisiekite su pardavėju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
