ANEX IQ Basic vežimėlis
IQ „Viskas viename“.
Rėmo sulankstymas
IQ RĖMAS
Rėmo išskleidimas
Priekinių ratų tvirtinimas
Fiksuojami priekiniai pasukami ratai
Galinių ratų tvirtinimas
Stabdžiai
Smūgio absorbcija
Rankenos reguliavimas
Pirkinių krepšelio atjungimas/prijungimas
Nešiojimo rankena
Rėmo pločio reguliavimas
Nešimo lopšio išpakavimas
Nešimo lopšio sulankstymas
Nešimo lopšio išskleidimas
Tvirtinimas prie rėmo
Vėdinimas
Nešiojamojo lopšio gobtuvo reguliavimas
Nešiojamojo lopšio užvalkalo tvirtinimas
Nešiojamojo lopšio valymas
Tvirtinimas prie rėmo
IQ SĖDYNĖS ĮRENGIMAS
Rėmo sulenkimas su sėdyne
Sėdynės bloko gaubto reguliavimas
Sėdynės bloko atlošo reguliavimas
Sėdynės dalies atlošo ventiliacija
Kojos atramos reguliavimas
Sėdynės bloko apsauginis užtvaras
Saugos diržų sagtis
Saugos diržų reguliavimas
Sėdynės bloko valymas
Minkštų prekių surinkimas
Bagio gaubto reguliavimas
Vežimėlio atlošo ventiliacija
Buggy atlošo reguliavimas 
Kojos atramos reguliavimas
Saugos diržų sagtis
Saugos diržų reguliavimas
Rėmo sulankstymas su bagiu
Uždangalas nuo lietaus lopšiui / sėdynei
Patikrinkite naujausius mūsų vadovus websvetainė: anexbaby.com
Informacija gali būti keičiama be įspėjimo. „Anex“ neprisiima atsakomybės už technines klaidas ar praleidimus, esančius šiame vadove. Įsigytas gaminys gali skirtis nuo šiame vadove aprašyto gaminio.
AVALEX PTE. LTD.,
8 Eu Tong Sen gatvė Nr. 17-88, Centrinė
Biuro bokštas 2, Singapūras, 059818
+65 62215096
office@anexbaby.com
Dokumentai / Ištekliai
 | IQ Basic vežimėlis |
Nuorodos
- Vartotojo vadovasmanual.tools
Dear Anex Team,
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Pagarbiai
Yuliya Tolkishevskaya
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Pagarbiai
Yuliya Tolkishevskaya
How do I remove the height adapters from the Anex IQ seat unit if they are stuck?
Removing height adapters from the Anex IQ seat unit typically requires engaging the release mechanism located on the adapters themselves or the seat unit's attachment points. If they are stuck, please try the following steps:
Atsargiai: Do not use excessive force or tools like pliers, as this may damage the plastic locking tabs. If the adapters remain stuck, it is recommended to contact Anex customer support directly at office@anexbaby.com or visit an authorized service center, as there may be a mechanical obstruction or a need for professional lubrication of the locking pins.
Read the full Q&A page