Lithonia Lighting T21 BL Track Lighting End Feed Connector Instruction Manual

Įvadas

This manual provides essential instructions for the safe installation and proper use of the Lithonia Lighting T21 BL Track Lighting End Feed Connector. This connector is specifically designed to supply power to Juno Lighting Trac-Master track systems.

The T21 BL connector is constructed from extruded aluminum with a thermoplastic insulator, ensuring both durability and reliable electrical performance within your lighting setup.

Saugos informacija

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami arba atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.
• Visos elektros jungtys turi atitikti vietinius kodeksus, potvarkius arba Nacionalinį elektros kodeksą (NEC).
• Jei nesate susipažinę su elektros instaliacija, kreipkitės į kvalifikuotą elektriką.
• Do not install in wet locations or areas exposed to direct water spray. This product is intended for indoor use only.
• Įsitikinkite, kad visos jungtys yra saugios ir tinkamai izoliuotos.

Pakuotės turinys

Prieš tęsdami montavimą, patikrinkite, ar yra visi toliau išvardyti komponentai ir ar jie nepažeisti.

The image above displays the Lithonia Lighting T21 BL Track Lighting End Feed Connector and its associated components, including the main connector body, mounting bracket, threaded nipple, and lock nut.

• 1 x T21 BL End Feed Connector Body
• 1 x montavimo kronšteinas
• 1 x Threaded Nipple
• 1 x fiksavimo veržlė
• 1 x Ground Screw

Sąranka ir diegimas

Išankstinis montavimas

• Turn off power at the circuit breaker or fuse box before starting any electrical work.
• Įsitikinkite, kad tvirtinimo paviršius yra švarus, sausas ir struktūriškai tvirtas.
• Gather necessary tools: screwdriver, wire strippers, pliers, voltage testeris.

Diegimo žingsniai

1. Prepare the Outlet Box: Ensure the electrical outlet box is properly installed and secured to the ceiling or wall.
2. Pritvirtinkite montavimo laikiklį: Secure the provided mounting bracket to the outlet box using appropriate screws (not included, typically supplied with the outlet box).
3. Prijunkite laidus: Feed the electrical wires from the outlet box through the center hole of the mounting bracket and into the connector body. Connect the supply wires to the corresponding wires on the T21 BL connector (typically black to black, white to white, and ground to ground). Use approved wire connectors.
4. Secure Connector Body: Position the T21 BL connector body over the mounting bracket. Use the threaded nipple and lock nut to firmly secure the connector to the mounting bracket and outlet box.
5. Connect to Track System: Align the end feed connector with the end of your Juno Lighting Trac-Master track section. Slide the connector firmly into the track until it clicks into place, ensuring a secure electrical and mechanical connection.
6. Atkurti maitinimą: Once all connections are secure and the track system is fully assembled, restore power at the circuit breaker.

Pastaba: For optimal safety and performance, it is recommended that installation be performed by a qualified electrician.

Naudojimo instrukcijos

The Lithonia Lighting T21 BL End Feed Connector is designed for continuous operation once properly installed. It serves as the power supply point for your track lighting system.

• Ensure all track heads or fixtures are correctly inserted and locked into the track system.
• Verify that the circuit breaker supplying power to the track is in the 'ON' position.
• If using a dimmer switch, ensure it is compatible with your track lighting fixtures and is functioning correctly.

Priežiūra

The T21 BL connector requires minimal maintenance to ensure long-lasting performance.

• Valymas: Periodically wipe the exterior of the connector with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• Patikra: Annually inspect the connector and track system for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them immediately.
• Do not attempt to disassemble or modify the connector. This will void the warranty and may create a safety hazard.

Trikčių šalinimas

If you experience issues with your track lighting system, refer to the following common troubleshooting steps:

• No Power to Track:
  • Patikrinkite, ar suveikė grandinės pertraukiklis. Jei reikia, nustatykite jį iš naujo.
  • Ensure all wire connections at the outlet box and within the connector are secure.
  • Verify that the connector is fully seated and making proper contact with the track.
• Pertraukiama galia:
  • Inspect for loose connections within the connector or where the connector meets the track.
  • Check for any damage to the track or connector that might be causing poor contact.
• Mirksinčios lemputės:
  • Ensure all track heads are properly installed and making good contact.
  • Patikrinkite, ar bendras vattage of your fixtures does not exceed the track system's capacity or the circuit's rating.

If troubleshooting steps do not resolve the issue, contact a qualified electrician or Lithonia Lighting customer support.

Specifikacijos

Garantija

The Lithonia Lighting T21 BL Track Lighting End Feed Connector is backed by a 1 metų gamintojo garantija nuo įsigijimo datos. Ši garantija taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo ir priežiūros sąlygomis.

Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications.

Palaikymas

For technical assistance, replacement parts, or to inquire about warranty claims, please contact Lithonia Lighting customer support. Refer to the official Lithonia Lighting webNaujausią kontaktinę informaciją rasite svetainėje arba produkto pakuotėje.

When contacting support, please have your product model number (T21 BL) and proof of purchase readily available.