TITAN 1/2 HP Mid-Duty Garbage Disposal System

Įvadas

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new TITAN 1/2 HP Mid-Duty Food Waste Disposer. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.

Saugos informacija

ĮSPĖJIMAS: Improper installation or operation can lead to personal injury or property damage. Always disconnect power before servicing or installing the unit.

• Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas.
• Montuodami dėvėkite apsauginius akinius.
• Prieš montuodami arba atlikdami techninę priežiūrą, įsitikinkite, kad maitinimo šaltinis yra atjungtas nuo grandinės pertraukiklio.
• Do not insert hands or foreign objects into the disposal opening.
• Naudojant skalbiklį, visada paleiskite šaltą vandenį.

Sąranka ir diegimas

The TITAN 1/2 HP Mid-Duty Food Waste Disposer features a standard 3-bolt mounting system for straightforward installation and replacement. It is designed to replace most garbage disposal brands using similar 3-bolt mounting systems.

Įtraukti komponentai:

• Food Waste Disposer Unit
• Nuimama apsauga nuo purslų
• Nerūdijančio plieno kriauklės flanšas
• Kamštis
• Maitinimo laidas (pridedamas)
• Drain Outlet Elbow and Elbow Screws
• Alkūninis flanšas

Diegimo žingsniai:

1. Prepare Sink Opening: Ensure the sink opening is clean and free of debris. If replacing an old disposal, remove the existing unit and mounting assembly.
2. Kriauklės flanšo montavimas: Apply plumber's putty around the underside of the stainless steel sink flange and press it firmly into the sink drain opening.
3. Assemble Mounting Ring: From underneath the sink, slide the fiber gasket, backup flange, and mounting ring onto the sink flange. Secure with the snap ring. Tighten the three mounting screws evenly to create a watertight seal.
4. Connect Dishwasher Drain (if applicable): If connecting a dishwasher, remove the knockout plug from the dishwasher inlet on the disposal unit. Secure the dishwasher hose to the inlet using a hose clamp.
5. Attach Disposal Unit: Align the three mounting tabs on the disposal unit with the mounting ring. Lift and twist the disposal unit clockwise until it locks into place. Use pliers or a specialized wrench to ensure a secure lock.
6. Connect Drain Plumbing: Attach the drain outlet elbow to the disposal unit using the provided elbow flange and screws. Connect the elbow to your existing household drain plumbing. Ensure all connections are tight to prevent leaks.
7. Prijunkite maitinimą: The unit comes with an attached 120V power cord. Plug the disposal into a grounded outlet.
8. Testas dėl nuotėkio: Run cold water into the sink and check all connections for leaks.

Figure 1: TITAN Garbage Disposal with Labeled Components

Figure 2: Included Installation Components

3 pav.: Tipinis montavimas po kriaukle

Naudojimo instrukcijos

The TITAN garbage disposal is a continuous feed unit, allowing food waste to be added while it is running.

1. Atsukite šalto vandens čiaupą iki vidutinio srauto.
2. Flip the disposal switch to the ON position.
3. Scrape food waste into the disposal opening. The Torque Master grinding system, with its stainless steel impellers, efficiently grinds coffee grounds, vegetable scraps, peelings, and small bones into fine particles.
4. Leiskite smulkintuvui veikti, kol bus pašalintos visos maisto atliekos ir bus girdimas tik vandens ir variklio garsas.
5. Turn off the disposal, then turn off the cold water after a few seconds to flush the drain line.

Priežiūra

Reguliarus valymas užtikrina optimalų jūsų atliekų smulkintuvo veikimą ir ilgaamžiškumą.

• Valymas: The removable rubber splash guard baffle can be easily removed for cleaning. Clean it regularly to prevent odor buildup.
• Kvapo kontrolė: To help control odors, grind citrus peels (lemon, orange) or a small amount of ice cubes with cold water.
• Venkite riebalų: Nepilkite riebalų ar alyvos į atliekų konteinerį, nes jie gali sukietėti ir užkimšti vamzdžius.

Trikčių šalinimas

If your disposal is not operating correctly, refer to the following common issues and solutions:

• Šalinimas nepradedamas:
         a. Check if the unit is plugged in securely.
         b. Press the red reset button located on the front bottom of the disposal unit (see Figure 1).
         c. Check your household circuit breaker.
• Dūzgimas, bet ne šlifavimas:
         a. This indicates an object is jammed in the grinding chamber. Turn off the disposal and disconnect power.
         b. Use a flashlight to look into the drain opening. If an object is visible, remove it with tongs or pliers. Niekada nenaudokite rankos.
         c. If no object is visible, use the provided hex wrench (or a 1/4 inch hex wrench) to insert into the center hole on the bottom of the disposal and turn it back and forth to free the impellers.
• Nuotėkis:
         a. Check all plumbing connections for tightness.
         b. Inspect the sink flange for proper sealing; re-tighten mounting screws if necessary.

Specifikacijos

4 pav.: Gaminio matmenys

Garantija

The TITAN 1/2 HP Mid-Duty Garbage Disposal System comes with a 5 metų garantija. During the warranty period, a defective or inoperative disposer will be replaced by the manufacturer at no charge to the consumer/purchaser. An original sales receipt is required for warranty claims. Costs of service labor for installation will be the consumer’s responsibility.

Palaikymas

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact TITAN customer support. Refer to your product packaging or the official TITAN websvetainė, kurioje pateikiama naujausia kontaktinė informacija.