DigiTech RP500 Integrated-Effects Switching System

1. Įvadas

The DigiTech RP500 is an advanced integrated-effects switching system designed for guitarists seeking comprehensive control over their sound. It combines the simplicity of stompboxes with the versatility of a professional effect switching system, allowing for precise control over effects, amplifiers, and cabinets. This manual provides detailed information on setting up, operating, and maintaining your RP500.

Figure 1: DigiTech RP500 Integrated-Effects Switching System, showing the footswitches and expression pedal.

2. Pagrindinės savybės

• Effect switching system for individual effect on/off control.
• Ability to bypass internal amplifiers and cabinets with a single button press.
• Over 126 integrated Amps, Cabinets, Stompboxes, and Effects.
• Equipped with 9 heavy-duty metal footswitches for durability and reliable operation.
• Built-in expression pedal for real-time control over various parameters.

3. Sąrankos vadovas

3.1 Išpakavimas ir pradinė apžiūra

Carefully remove the RP500 from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Ensure all components listed in the packing material are present.

3.2 Maitinimo jungtis

Connect the included power adapter to the RP500's power input jack and then to a suitable electrical outlet. Ensure the power supply matches the specified voltage (9 V).

3.3 Garso jungtys

• Gitaros įvestis: Connect your guitar to the 1/4" Guitar Input jack.
• Linijos išėjimai: Connect the RP500's Line Outputs to your amplifier's input, a mixer, or an audio interface. Use balanced cables for optimal signal integrity if connecting to a mixer.
• Ausinių išvestis: For silent practice, connect headphones to the dedicated headphone jack.

3.4 USB jungtis

Connect the RP500 to your computer using a USB 2.0 compliant cable. This connection allows for audio streaming (2 channels to/from computer) and software control via the DigiTech X-Edit software. Ensure your computer meets the minimum system requirements for the software.

2 pav.: Iš ​​viršaus į apačią view of the DigiTech RP500, highlighting the display and control knobs.

4. Operacija

4.1 Veikimo režimų supratimas

The RP500 offers two primary operating modes: Iš anksto nustatytas režimas ir Pedalboard Mode.

• Iš anksto nustatytas režimas: Allows you to switch between 99 user and 99 factory presets. Each preset can contain a unique combination of effects, amps, and cabinet models. Use the Bank Up/Down footswitches to navigate through banks of presets.
• Pedalboard Mode: Within a selected preset, this mode allows you to individually turn on or off specific effects and stompboxes using the dedicated footswitches (1-5). This mimics the functionality of a traditional pedalboard.

4.2 Kojinio jungiklio funkcijos

The RP500 features 9 heavy-duty vacuum-style footswitches for various controls:

• Apeiti: Toggles the overall effect processing on or off.
• Bakstelėkite Tempo: Sets the tempo for time-based effects like delay and tremolo.
• Bank Up/Down: Navigates through preset banks.
• Program Up/Down: Selects individual programs within a bank.
• Derintuvas: Activates the built-in chromatic tuner.
• Program Access: Allows entry into program editing.
• Stompbox/Effect On/Off (1-5): In Pedalboard Mode, these switches activate or deactivate assigned effects.

4.3 Expression pedalas

The built-in expression pedal can be assigned to control various effect parameters in real-time, such as Wah, Volume, Whammy, or other modulation effects. Its sensitivity can be adjusted via the X-Edit software.

4.4 Amp/Cabinet Bypass Mode

This unique mode allows you to defeat the internal amplifier and cabinet models within the RP500. This is particularly useful when you want to use the RP500 solely for its stompbox and effect models, routing them into your own external amplifier for its tone. This ensures your amplifier's character remains dominant while still benefiting from the RP500's extensive effects library.

4.5 Effect Categories and Models

The RP500 features a vast array of effects, stompboxes, and amplifier/cabinet models. Below is a comprehensive list of the available models, many of which are based on classic and popular gear.

4.5.1 Wahs

• DigiTech® Wah
• Cry Wah (Based on a Dunlop® Cry Baby™ Wah)
• Clyde Wah (Based on a Vox® Clyde McCoy™ Wah)

4.5.2 kompresoriai

• DigiTech® Compressor
• CS Compressor (Based on a Boss® CS-2 Compressor/Sustainer)
• Dyna Comp (Based on an MXR® Dynacomp™)

4.5.3 Triukšmo vartai

• DigiTech® Silencer™ Noise Gate
• DigiTech Auto Swell Gate

4.5.4 EQ

• 3-band semi-parametric EQ

4.5.5 Chorus Stompbox Models

• DigiTech® Dual Chorus
• DigiTech Multi-Chorus
• DigiTech Glistening Chorus
• CE Chorus (based on a Boss® CE-2 Chorus)
• TC Chorus (based on a TC Electronics® Chorus)

4.5.6 Flanger Models

• DigiTech® Flanger
• DigiTech Triggered Flanger
• MX Flanger (based on MXR® Flanger)
• EH Flanger (based on Electro Harmonix® Electric Mistress™)
• AD Flanger (based on ADA™ Flanger)

4.5.7 Phaser Models

• DigiTech® Phaser
• MX Phaser (based on MXR® Phase 100)
• EH Phaser (based on Electro Harmonix® Small Stone™)

4.5.8 Pitch Models

• DigiTech® Whammy™
• DigiTech® Pitch Shift
• DigiTech® Detune
• DigiTech® Harmony Pitch
• Octaver (based on a Boss® OC-2 Octaver™)

4.5.9 Vibrato / Rotary Models

• DigiTech® Vibrato
• DigiTech® Rotary
• DigiTech® Vibro / Pan
• Unovibe (based on a Unicord Uni-Vibe™)

4.5.10 Tremolo Models

• DigiTech® Tremolo
• DigiTech® Panner
• DigiTech ScatterTrem – Dual tremolo effect
• Opto Tremolo (based on a Fender® Opto Tremolo™)
• Bias Tremolo (based on a Vox® Bias Tremolo)

4.5.11 Envelope / Special Models

• DigiTech® Auto Yah™
• DigiTech® YaYa™
• DigiTech® Synth Talk™
• DigiTech® Step Filter
• DigiTech® Sample & Hold
• DOD FX25 (based on DOD® FX25 Envelope Filter)

4.5.12 Delays

• Skaitmeninis delsimas
• Analoginis delsimas
• Pong Delay
• Moduliuotas delsimas
• Juostos delsimas
• Atbulinės eigos delsimas
• DM Analog Delay (based on Boss® DM2 Analog Delay)
• Echo Plex (based on a Maestro EP-1 Tube Echoplex)

4.5.13 Reverbs

• Lexicon® Ambience
• Lexicon® Hall
• Lexicon® Room
• Lexicon® Studio
• Spring (based on a Fender® Twin Reverb™)
• EMT240 (based on an EMT® 240 Plate Reverb)

4.5.14 Distortions

• SCREAMER (Based on an Ibanez® TS-9)
• TS 808 (Based on an Ibanez TS-808 Tube Screamer)
• SPARKDRIVE (Based on a Voodoo® Lab Sparkle Drive®)
• OD OVERDRIVE (Based on a Guyatone® Overdrive OD-2)
• DOD 250 (Based on a DOD® 250 Overdrive/Preamp)
• RODENT (Based on a Pro Co RAT™)
• MX DISTORTION (Based on an MXR® Distortion +)
• DS (Based on a Boss® DS-1™ Distortion)
• GRUNGE (DigiTech® Grunge®)
• ZONE (Based on a Boss MT-2 Metal Zone®)
• DEATH METAL (DigiTech Death Metal™)
• GONKULATOR (Based on a DOD® Gonkulator Ring Modulator)
• 8TAVIA (Based on a Roger Mayer Octavia™)
• FUZZLATOR (Based on a Demeter Fuzzulator)
• CLASSIC FUZZ (Based on a DOD Classic Fuzz)
• FUZZY FACE (Based on an Arbiter® Fuzz Face™)
• BIG PI (Based on an Electro-Harmonix® Big Muff Pi®)
• REDLINE (DigiTech® Redline Overdrive)

4.5.15 Ampkeltuvų modeliai

• 57 CHAMP (Based on a '57 Fender® Tweed Champ®)
• 57 DELUXE (Based on a '57 Fender® Tweed Deluxe™)
• 59 BASSMAN (Based on a '59 Fender® Tweed Bassman®)
• 62 BROWN BASSMAN (Based on a '62 Fender® Brownface Bassman®)
• 65 TWIN REVERB (Based on a '65 Fender® Blackface Twin Reverb®)
• 65 REVERB (Based on a '65 Fender Blackface Deluxe Reverb®)
• 65 JTM-45 (Based on a '65 Marshall® JTM-45)
• 68 SUPER LEAD PLEXI (Based on a '68 Marshall 100 Watt Super Lead (plexi))
• 68 JUMP PANEL (Based on a '68 Marshall Jump Panel)
• 77 MASTER VOLUME (Based on a '77 Marshall Master Volume)
• 83 JCM800 (Based on an '83 Marshall JCM800)
• 93 JCM900 (Based on a '93 Marshall JCM900)
• 01 JCM2000 (Based on an '01 Marshall JCM2000 (Solo Channel))
• 62 AC15 (Based on a '62 Vox® AC15)
• 63 AC30 TOP BOOST (Based on a '63 Vox AC30 Top Boost)
• 69 HIGH WATTAGE (Based on a '69 Hiwatt® Custom 100 DR103)
• 81 MARK IIC (Based on an '81 Mesa Boogie® Mark II C)
• 01 DUAL RECTIFIED (Based on an '01 Mesa Boogie Dual Rectifier)
• MARK 4 (Based on an '93 Mesa Boogie Mark IV)
• TRIPLE RECTIFIED (Based on an '01 Mesa Boogie Triple Rectifier)
• 99 LEGACY VL-100 (Based on a Carvin® Legacy VL-100)
• 96 MATCH HC-30 (Based on a '96 Matchless™ HC30)
• 88 SLO-100 (Based on an '88 Soldano SLO-100)
• GA-40 (Based on a Gibson® GA-40)
• 5150 II (Based on a Peavey® 5150® II)
• JAZZ COMBO (Based on a Roland® JC-120)
• SOLAR 100S (Based on a Sunn® 100S)
• HT-100 (Based on a Randall® HT-100)
• OJ 120 (Based on a Orange™ OR 120)
• SUPER G (Based on a Laney™ Supergroup)
• DIGITECH SOLO
• DIGITECH METAL
• DIGITECH BRIGHT CLEAN
• DIGITECH CHUNK
• DIGITECH CLEAN TUBE (DigiTech 2101 Clean Tube)
• DIGITECH CRUNCH
• DIGITECH BLUES
• DIGITECH FUZZ
• DIGHITECH SPANK
• DIGITECH HIGH GAIN
• DIGITECH MONSTER (Maxed out gain)
• DIGITECH “TWEEDFACE” (Tweed preamp w/Blackface poweramp)
• DIGITECH “BLACKBASS” (’65 Blackface preamp w/ Bassman poweramp)
• DIGITECH STONERROCK (Thick, sludgy distorted amp tonas)
• DIGITECH DARKMETAL (Responsive, tight metal tone)
• DIGITECH TRANSISTOR (Solid state transistor amp garsas)
• DIGITECH BROWNSOUND (Hot rodded 80’s stack tone)
• DIGITECH MOSH (Chunky metal tone with just the right amount of sizzle)
• 2101 CLEAN TUBE (DigiTech GSP2101™ Artist Clean Tube)
• 2101 SATURATED TUBE (DigiTech GSP2101 Artist Saturated Tube)
• DIRECT (No amp modelis)
• DREADAUGHT ACOUSTIC
• JUMBO ACOUSTIC

4.5.16 Cabinet Models

• CHAMP 1X8 (Based on a 1x8 '57 Fender® Tweed Champ®)
• DELUXE 1X12 (Based on a 1x12 '57 Fender Tweed Deluxe®)
• DELUXE REVERB 1X12 (Based on a 1x12 '65 Fender Blackface Deluxe Reverb)
• BRITISH 1X12 (Based on a 1x12 '62 Vox® AC15 w/20W Vox Speaker)
• BLONDE 2X12 (Based on a 2x12 '57 Fender Blonde Bassman®)
• TWIN 2X12 (Based on a 2x12 '65 Fender Blackface Twin Reverb®)
• BRITISH 2X12 (Based on a 2x12 '63 Vox® AC0 Top Boost w/ Jensen® Blue Backs)
• BASSMAN 4X10 (Based on a 4x10 '59 Fender Tweed Bassman®)
• BRITISH 4X12 (Based on a 4x12 Marshall® 1969 Straight w/ Celestion® G12-T70)
• GREENBACK 4X12 (Based on a 4x12 Marshall 1969 Slant w/ Celestion 25W Green backs)
• FANE 4X12 (Based on a 4x12 Hiwatt® Custom w/ Fane Speakers)
• BOUTIQUE 4X12 (Based on a 4x12 '96 VHT® Slant w/ Celestion Vintage 30’s)
• VINTAGE 4X12 (Based on a 4x12 Johnson® Straight w/ Celestion Vintage 30’s)
• DIGITECH SOLO 4X12 (4x12 DigiTech® Solo)
• DIGITECH BRIGHT 2X12 (2x12 DigiTech Bright)
• DIGITECH METAL 4X12 (4x12 DigiTech Metal)
• DIGITECH ROCK 4X12 (4x12 DigiTech Rock)
• DIGITECH ALT 4X12 (4x12 DigiTech Alt Rock)
• DIGITECH VINTAGE 4X12 (4x12 DigiTech Vintage)
• DIGITECH CHUNK 4X12 (4x12 DigiTech Chunk)
• DIGITECH SPANK 4X12 (4x12 DigiTech Spank)
• DIGITECH SPEAKER COMP (4x12 DigiTech Speaker Compensation)
• DIRECT (No cabinet model)

5. Priežiūra

Proper maintenance ensures the longevity and optimal performance of your DigiTech RP500.

• Valymas: Išorinį įrenginio paviršių valykite minkštu, sausu skudurėliu. Venkite abrazyvinių valiklių ar tirpiklių, kurie gali pažeisti apdailą ar vidinius komponentus.
• Saugykla: RP500 laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių, ekstremalių temperatūrų ir didelės drėgmės.
• Jungtys: Periodically check all cable connections for wear and tear. Ensure they are securely plugged in during operation.
• Programinės įrangos atnaujinimai: Regularly check the DigiTech website for firmware updates and new versions of the X-Edit software to ensure your unit has the latest features and bug fixes.

6. Problemų sprendimas

If you encounter issues with your RP500, refer to the following common troubleshooting steps:

• Nėra galios: Ensure the power adapter is correctly connected to the unit and a working power outlet. Verify the power adapter's specifications match the RP500's requirements.
• Nėra garso:
  • Check all audio cable connections (guitar input, line outputs to amp/mixer).
  • Ensure the RP500 is not in Bypass mode.
  • Verify the volume levels on the RP500, your amplifier, and any connected mixer.
  • If using headphones, ensure they are properly connected and the headphone volume is up.
• Unexpected Sound/Effect Issues:
  • Confirm you are in the correct operating mode (Preset or Pedalboard).
  • Check individual effect settings within the current preset.
  • Consider performing a factory reset if issues persist (refer to the full manual or DigiTech support for instructions).
• USB ryšio problemos:
  • Ensure the USB cable is securely connected to both the RP500 and your computer.
  • Verify that your computer meets the minimum system requirements for the X-Edit software.
  • Install or update the necessary drivers for the RP500.
  • If you are experiencing issues with the looper function, ensure your firmware is updated to version 2.0 or later, as this feature was added in later updates.

7. Specifikacijos

7.1 Bendrosios specifikacijos

• Kėbulo tipas: Durable cast metal construction
• Ekranas: Large 8 character alpha-numeric and 2 character numeric LED display
• A/D keitiklis: 24 bitų aukštos kokybės garsas
• D/A keitiklis: 24 bitų aukštos kokybės garsas
• SampLing dažnis: 44.1kHz throughout
• DSP Section: 1 Audio DNA2™ DSP Processor
• Iš anksto nustatyta atmintis: 99 User / 99 Factory Presets

7.2 Analog Input Connections

• Guitar input Impedance: 1M Oms
• Maximum Output signal: 8 dBu

7.3 Analog Output Connections

• Line outputs Impedance: 1K Ohms unbalanced / 2K Ohms balanced
• Maximum Output level: 23 dBu
• Mixer Outputs Impedance: 2k Ohms balanced
• Maksimalus išvesties lygis: 23 dBu
• Headphone Outputs Minimum Headphone Impedance: 50 omai
• Išėjimo galia: 250mW / channel
• Electronic SNR: ≥ 110 dB

7.4 USB Specifications

• USB: 2.0 atitinka
• Garso transliacija: 2 channels to computer, 2 channels from computer
• Sample norma: 44.1 kHz

7.5 Size/Dimensions

• Vieneto matmenys (P x A x G): 19.5 x 2.25 x 8.75 col.
• Shipping Dimensions (W x H x D) (approximate): 21 x 4 x 11 col.
• Shipping Weight (approximate): 8.0 svaro

7.6 Programinės įrangos reikalavimai

7.6.1 Windows Software Requirements

• Vista Home/Premium XP Home/Professional (SP2 installed, .NET 2.0 installed*)
• Pentium®/Athlon™ 1.4GHz or later
• 512MB RAM (1GB RAM recommended)
• 180MB hard disk space for application
• DVD-ROM įrenginys
• USB prievadas
• Internet connection required for Cubase activation
• *.NET 2.0 will be installed during installation of X-Edit software if required on XP systems

7.6.2 Mac Software Requirements

• OS 10.4.x or later
• PowerPC G4/G5 1GHz or later
• 512MB RAM (1GB RAM recommended)
• 180MB hard disk space for application
• DVD-ROM įrenginys
• USB prievadas
• Internet connection required for Cubase activation

8. Garantija ir palaikymas

DigiTech products are manufactured to high quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official DigiTech website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DigiTech customer support through their official channels.

Daugiau informacijos ir pagalbos išteklių galite rasti apsilankę „DigiTech“ parduotuvė „Amazon“ platformoje.