Zap ZAP-71239-RX4

Zap Portable AA Ni-MH Battery Charger

Model: ZAP-71239-RX4

Įvadas

This manual provides detailed instructions for the safe and efficient use of your Zap Portable AA Ni-MH Battery Charger, Model ZAP-71239-RX4. Please read this manual thoroughly before operating the device and retain it for future reference.

Zap Portable AA Ni-MH Battery Charger with four green AA Ni-MH 1200mAh 1.2V batteries

Image: The Zap Portable AA Ni-MH Battery Charger (white casing with silver trim) shown alongside four green Zap Ni-MH AA 1200mAh 1.2V rechargeable batteries. The charger features LED indicators and a USB port.

Saugos instrukcijos

Pakuotės turinys

Patikrinkite pakuotę, ar joje yra šie daiktai:

Sąranka

  1. Prijunkite prie maitinimo: Connect the provided USB charging cable to the charger's input port and then to a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank). The charger's LED indicators may light up to show it is powered.
  2. Įdėkite baterijas: Open the battery compartment. Insert one to four AA Ni-MH rechargeable batteries into the designated slots, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the charger.

Naudojimo instrukcijos

  1. Pradinis mokestis: Once batteries are correctly inserted and the charger is connected to a power source, the charging process will begin automatically.
  2. LED indikatoriai: The charger features LED indicators to display the charging status.
    • Vientisa raudona / oranžinė: Indicates batteries are currently charging.
    • Tvirtai žalia: Indicates batteries are fully charged.
    • Mirksi: May indicate an error (e.g., incorrect battery type, faulty battery, or improper insertion). Refer to the Troubleshooting section.
  3. Įkrovimo laikas: Charging time varies depending on the battery capacity and the power output of the USB source. For the included 1200mAh batteries, a full charge typically takes several hours.
  4. Baterijų išėmimas: Once the LED indicators show a full charge (solid green), disconnect the charger from the power source and carefully remove the charged batteries.

Priežiūra

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Charger LEDs do not light up.Nėra maitinimo jungties arba sugedęs laidas.Ensure the USB cable is securely connected to both the charger and the power source. Try a different USB cable or power source.
Batteries are not charging (LEDs flashing or not changing).Incorrect battery type, improper insertion, or faulty battery.Verify batteries are Ni-MH AA type. Re-insert batteries ensuring correct polarity. Try charging individual batteries to identify a faulty one.
Įkroviklis arba baterijos pernelyg įkaista.Perkrovimas, sugedęs akumuliatorius arba prasta ventiliacija.Immediately disconnect the charger. Ensure proper ventilation around the charger. Do not use damaged or leaking batteries.

Specifikacijos

Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your purchase or contact Zap customer service through their official website. Please have your model number (ZAP-71239-RX4) and purchase date available when seeking support.

Susiję dokumentai - ZAP-71239-RX4

Preview „Zap“ bekontakčiai išėjimo mygtukai ACC351-352, ACC361-362 – greito paleidimo vadovas
Greitas „Zap“ bekontakčių išėjimo mygtukų (ACC351, ACC352, ACC361, ACC362) paleidimo vadovas, kuriame išsamiai aprašomos jų funkcijos, sąranka, apibrėžimai, trikčių šalinimas ir specifikacijos. Sužinokite, kaip įdiegti ir konfigūruoti šiuos higieniškus ir patogius durų atidarymo mygtukus.
Preview Zap Press To Exit Buttons Quick Start Guide - ACC060-153 Series
Quick start guide for Zap Press To Exit Buttons (ACC060-063, ACC100-103, ACC150-153) from System Q Ltd. Covers installation, definitions, setup examples, connections, troubleshooting, and specifications for access control systems.
Preview Zap ACC510 Surface Mount Mag Lock Quick Start Guide
Comprehensive quick start guide for the Zap ACC510 Surface Mount Mag Lock, covering installation, connections, time delay, status LED, setup examples, mounting instructions, troubleshooting, and technical specifications.
Preview ACC512 Mortice Mount Mag Lock - Quick Start Guide
Quick start guide for the Zap ACC512 Mortice Mount Mag Lock, detailing installation, wiring, user information, and troubleshooting for secure access control systems.
Preview „Zap“ mygtukai, paspaudžiami norint išeiti: ACC060-153 greito paleidimo vadovas
Greitas pradžios vadovas, skirtas „Zap“ ACC060-063, ACC100-103 ir ACC150-153 serijos mygtukams „Press to Exit“. Apima diegimą, apibrėžimus, sąrankos pavyzdžius.ampprieigos kontrolės sistemų failai, jungtys ir trikčių šalinimas.
Preview „ZAP Blast Knuckles“ elektrošoko pistoleto modelis ZAPBK950, naudojimo instrukcija
„ZAP Blast Knuckles“ elektrošoko pistoleto (ZAPBK950 modelis) naudojimo instrukcija, kurioje išsamiai aprašomi saugos įspėjimai, veikimas, efektai, akumuliatoriaus keitimas ir informacija apie garantiją.