Delta Dore Driver 230 CPL Electric Radiator Energy Manager - Model 6051101 User Manual

1. Įvadas

This manual provides detailed instructions for the proper installation, configuration, and operation of your Delta Dore Driver 230 CPL Electric Radiator Energy Manager. This device is designed to optimize the management of your electric heating system across up to three zones, enhancing comfort and promoting energy savings. Please read this manual thoroughly before attempting installation or operation.

2. Produktas baigtasview

The Delta Dore Driver 230 CPL is a powerline communication (CPL) energy manager for electric heating systems equipped with pilot wires. It allows for precise control of electric radiators across 1 to 3 zones. Key features include:

• Kelių zonų valdymas: Manages up to three independent heating zones.
• Keturi veikimo režimai: Comfort, Eco, Frost Protection, and Stop.
• Savaitinis programavimas: Customizable heating schedules in 15-minute increments.
• Absence Management: Program reduced heating during prolonged absences.
• Domestic Hot Water (DHW) Management: Controls DHW during off-peak hours.
• Patogi vartotojo sąsaja: Ambient temperature display and central dial for easy adjustments.

1 paveikslas: Priekyje view of the Delta Dore Driver 230 CPL. The display shows time and zone indicators (Z1, Z2, Z3). Control buttons for '+' and '-' adjustments, an 'OK' button, and a central rotary dial for mode selection are visible. The device also features the 'DELTA DORE' brand logo and 'DRIVER 230 CPL' model designation.

3. Sąranka ir diegimas

Svarbu: For correct operation, the Driver 230 CPL requires the mandatory installation of Delta Dore CPL receivers (not included) connected to each electric radiator and a GP6 CPL load shedding device (not included). Professional installation by a qualified electrician is highly recommended.

3.1. Būtinos sąlygos

• Delta Dore CPL receivers installed on each electric radiator.
• Delta Dore GP6 CPL load shedding device installed.
• 230V power supply at the installation location.
• Electric radiators with pilot wire functionality.

3.2. Prietaiso montavimas

1. Choose a suitable location on an interior wall, away from direct sunlight, heat sources, or drafts, to ensure accurate temperature readings.
2. Mount the Driver 230 CPL device surface-mounted (en saillie) to the wall.
3. Connect the device to a 230V power supply. The device communicates with the CPL receivers via its power connection.

3.3. Pradinė konfigūracija

Upon first power-up, the device may require initial setup, including time and date. Refer to the on-screen prompts and use the '+' and '-' buttons to adjust values and 'OK' to confirm.

4. Operacija

The Driver 230 CPL allows you to control your heating system through various modes and manual adjustments.

4.1. Veikimo režimai

Use the central rotary dial to select one of the four main operating modes:

• Komforto režimas (☀): Maintains the programmed comfort temperature.
• Eco Mode (🌙): Maintains a reduced temperature, typically 3-4°C below comfort, for energy savings.
• Apsaugos nuo užšalimo režimas (❄): Maintains a minimum temperature (e.g., 7°C) to prevent pipes from freezing.
• Stop Mode (Ⓒ): Šildymas išjungtas.

4.2. Temperatūros reguliavimas

The ambient temperature is displayed on the energy manager's screen. You can modify the desired temperature either permanently or temporarily:

• Permanent Adjustment: Rotate the central dial to the desired mode, then use the '+' and '-' buttons to set the target temperature for that mode.
• Laikinas koregavimas: While in a programmed mode, use the '+' or '-' buttons to temporarily override the current temperature. This override can be set for a duration from 15 minutes to 72 hours. The system will revert to the programmed schedule after the temporary period.

5. Savaitinis programavimas

The Driver 230 CPL allows for weekly programming, enabling you to adapt your heating to your lifestyle and maximize energy savings. Programming can be set in 15-minute increments.

5.1. Accessing Programming Mode

To enter programming mode, rotate the central dial to the 'PROG' position. The display will guide you through the programming steps for each zone (Z1, Z2, Z3).

5.2. Setting Schedules

1. Select the desired zone (Z1, Z2, or Z3) using the '+' or '-' buttons if prompted.
2. For each day of the week, define the operating mode (Comfort, Eco, Frost Protection, Stop) for each 15-minute segment.
3. Use the '+' and '-' buttons to navigate through time slots and modes.
4. Press 'OK' to confirm each setting and move to the next segment or day.
5. Repeat for all days and zones as required.

6. Absence Management

For prolonged absences, you can program an absence mode to reduce or turn off heating, saving energy. The system will automatically resume normal programming upon your return date.

6.1. Activating Absence Mode

1. Rotate the central dial to the suitcase icon (💼) or navigate to the absence setting via the menu.
2. Set the desired departure date and time using the '+' and '-' buttons.
3. Set the desired return date and time.
4. Choose the desired heating mode during absence (e.g., Frost Protection or Stop).
5. Confirm settings with 'OK'.

7. Domestic Hot Water (DHW) Management

The Driver 230 CPL also supports the management of domestic hot water (ECS) production, typically during off-peak electricity hours, to further optimize energy consumption. Refer to your specific installation configuration for details on DHW control.

8. Priežiūra

The Delta Dore Driver 230 CPL is designed for reliable operation with minimal maintenance.

• Valymas: Periodically wipe the device with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
• Patikra: Ensure the device is securely mounted and that there are no visible signs of damage.
• Programinės įrangos atnaujinimai: Information regarding software updates is not available.

9. Problemų sprendimas

If you encounter issues with your Driver 230 CPL, consider the following common solutions:

If problems persist, contact Delta Dore customer support or a qualified technician.

10. Specifikacijos

11. Palaikymas ir garantija

For technical support, product inquiries, or warranty information, please refer to the official Delta Dore website or contact their customer service department. Specific details regarding warranty coverage and spare parts availability are not provided in the product information.

• Atsarginių dalių prieinamumas: Informacija nepasiekiama.
• Programinės įrangos atnaujinimai garantuojami iki: Informacija nepasiekiama.