Svarbi saugos informacija
This smoke alarm detects products of combustion using ionization technology. Ionization smoke alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. For maximum protection, it is recommended to install both ionization and photoelectric smoke alarms.
- Nedažykite signalizacijos. Paint can clog the sensing chambers and prevent the alarm from operating properly.
- Do not disconnect power. This alarm is designed for continuous operation.
- Kas savaitę patikrinkite žadintuvą. Refer to the 'Operation' section for testing instructions.
- Signalą keiskite kas 10 metų. Smoke alarms have a limited lifespan and should be replaced after 10 years from the date of manufacture.
Diegimo vadovas
The Kidde i12060 is a hardwired smoke alarm designed for permanent installation. Ensure power is off at the circuit breaker before beginning installation.
- Paruoškite laidus: The alarm comes with a pre-stripped wiring harness with tinned strands for easy connection. Connect the black wire to the hot line, the white wire to neutral, and the orange wire to the interconnect line (if connecting multiple alarms).
- Sumontuokite pagrindą: Secure the mounting bracket to the ceiling or wall using the provided screws. The large mounting base helps cover imperfections and protect surface paint.
- Prijungti signalizaciją: Plug the wiring harness into the back of the smoke alarm.
- Attach Alarm to Base: Sulygiuokite signalizaciją su tvirtinimo laikikliu ir pasukite pagal laikrodžio rodyklę, kol ji užsifiksuos vietoje.
- Įjunkite atsarginę baterijos funkciją: Remove the battery pull tab to activate the included 9-volt battery backup. This ensures continuous protection during power outages.
- Atkurkite maitinimą ir patikrinkite: Turn on the power at the circuit breaker and test the alarm as described in the 'Operation' section.
Vaizdas: Galinis view of the Kidde i12060 smoke alarm, illustrating the mounting plate and the pre-stripped wiring harness for electrical connection.
Image: A person reaching up to install the smoke alarm onto the ceiling mounting bracket, demonstrating the final step of physical installation.
Operacija
Once installed and powered, your Kidde i12060 smoke alarm is ready to protect your home. It features an indicator LED and a test/hush button for easy interaction.
Signalizacijos bandymas
It is crucial to test your smoke alarm weekly to ensure proper function.
- Press and hold the 'TEST' button located on the front of the alarm.
- The alarm will sound a loud, pulsating alarm. This indicates the electronic circuitry, horn, and battery are working.
- Atleiskite mygtuką. Signalas išsijungs.
Using the Hush Feature
The 'HUSH' feature temporarily silences nuisance alarms caused by non-emergency situations, such as cooking fumes.
- Press the 'HUSH' button when a nuisance alarm sounds.
- The alarm will be desensitized for approximately seven minutes. During this time, the alarm will chirp every 30 to 40 seconds.
- If smoke is too dense, the hush feature will be overridden, and the alarm will continue to sound.
- The alarm automatically resets at the end of the seven-minute period.
Image: Close-up of the front of the Kidde i12060 smoke alarm, highlighting the 'TEST' and 'HUSH' buttons for operational control.
Priežiūra ir baterijų keitimas
Regular maintenance ensures your smoke alarm remains functional and reliable.
Baterijos keitimas
The i12060 features a convenient front-loading battery door, allowing you to replace the 9-volt battery without removing the alarm from its mounting bracket.
- Open the front battery door by sliding the latch or pressing the designated area.
- Remove the old 9-volt battery.
- Insert a new 9-volt alkaline battery, ensuring correct polarity.
- Tvirtai uždarykite akumuliatoriaus dangtelį.
- Pakeitę bateriją, patikrinkite signalizaciją.
The alarm will chirp approximately once every 30-40 seconds when the battery is low. Replace the battery immediately when this occurs.
Signalizacijos valymas
Clean your smoke alarm at least once a year. Use a soft brush or cloth to remove dust from the alarm's cover. Do not use cleaning solvents or spray directly onto the alarm.
Image: The Kidde i12060 smoke alarm with its front battery compartment open, clearly showing the 9-volt battery slot for easy replacement.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Signalizacija pypsi kas 30–40 sekundžių. | Senka baterija. | Replace the 9-volt battery immediately. |
| Signalizacija skamba dažnai, be matomų dūmų. | Nuisance alarm (e.g., cooking fumes, steam), dust accumulation. | Use the 'HUSH' feature. Clean the alarm as described in the 'Maintenance' section. Ensure proper placement away from cooking areas or high humidity. |
| Bandymo metu aliarmas neskamba. | Nėra maitinimo, išsikrovusi baterija, sugedęs įrenginys. | Check circuit breaker. Replace battery. If issues persist, replace the alarm. |
| Alarm is over 10 years old. | End of service life. | Pakeiskite visą dūmų detektorių. |
Gaminio specifikacijos
| Prekės ženklas | Kidde |
| Modelio numeris | i12060 |
| Maitinimo šaltinis | 120 Volts AC (Hardwired) with 9V Battery Backup |
| Jutiklio tipas | Jonizacija |
| Baterijos tipas | 9-volt Alkaline (included) |
| Suderinami įrenginiai | Up to 24 Kidde devices (interconnect system) |
| Matmenys | Maždaug 11.9 x 6.3 x 6.2 colio |
| Svoris | Maždaug 3 svaro |
| Darbinė temperatūra | Iki 100 laipsnių Farenheito |
Garantija ir palaikymas
The Kidde i12060 smoke alarm comes with a 10 metų ribota garantija, apimanti medžiagų ir gamybos defektus nuo įsigijimo datos.
For technical support, warranty claims, or further assistance, please refer to the official Kidde website or contact their customer service. You can also find a detailed User Guide in PDF format for additional information:
