1. Įvadas
This manual provides detailed instructions for the installation, programming, and operation of your Intermatic HB800RCH 15-AMP 7-Day Outdoor Plugin Digital Timer. This device is designed to automate the control of electrical loads outdoors, offering convenience and energy efficiency through programmable on/off cycles and astronomic features.
2. Saugos informacija
Please read and understand all safety instructions before installing or operating this timer. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the timer is plugged into a grounded outdoor receptacle protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not immerse the timer in water or expose it to direct water spray.
- Neviršykite maksimalios elektros srovės vardinės vertės – 15 Amps.
- Always unplug the timer from the power source before performing any maintenance or cleaning.
- Laikykite vaikus atokiau nuo laikmačio ir prijungtų įrenginių.
- Do not use with extension cords that are not rated for outdoor use.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- Intermatic HB800RCH Digital Timer Unit
- Instrukcijų vadovas
4. Produkto ypatybės
- Outdoor digital timer functionality
- Up to 14 programmable ON/OFF events per week
- 15-Amp capacity for various outdoor applications
- Astronomic feature: automatically adjusts to local sunrise/sunset times
- Two grounded receptacles for connecting devices
- Battery backup for settings retention during power outages

1 paveikslas: Priekyje view of the Intermatic HB800RCH Digital Timer, showing the digital display, control buttons (OK, MODE, PROG, ON/OFF), and the manual override dial. The timer is gray with a black power cord and plug.

2 paveikslas: Apačia view of the Intermatic HB800RCH Digital Timer, illustrating the two grounded electrical receptacles. These outlets are recessed for weather protection.
5. Sąranka
- Pradinis įjungimas: Plug the timer into a standard 120V AC outdoor GFCI-protected outlet. The display will illuminate.
- Baterijos aktyvinimas: The timer includes a battery backup. Ensure it is active to retain settings during power outages. If the display is blank or dim, allow the timer to charge for a few minutes.
- Laikmačio nustatymas iš naujo: If the display shows erratic characters or you wish to clear all previous settings, locate the small recessed reset button (often labeled 'R' or 'RESET') and press it firmly with a non-metallic pointed object (e.g., a pen tip). The display will reset to 12:00 AM.
- Dabartinio laiko ir dienos nustatymas:
- Paspauskite REŽIMAS button until "SET CLOCK" appears.
- Naudokite OK button to select the hour, then use the rotary dial (or UP/DOWN buttons if present) to adjust the hour. Press OK patvirtinti.
- Pakartokite su minutėmis ir AM/PM.
- Naudokite OK button to select the day of the week, then use the rotary dial to adjust. Press OK patvirtinti.
- Paspauskite REŽIMAS norėdami išeiti iš laikrodžio nustatymo.
- Setting Current Date (for Astronomic Feature):
- Paspauskite REŽIMAS mygtuką, kol pasirodys užrašas „NUSTATYTI DATĄ“.
- Naudokite OK button to select the year, then use the rotary dial to adjust. Press OK patvirtinti.
- Pakartokite su mėnesiu ir diena.
- Paspauskite REŽIMAS to exit date setting.
- Setting Location for Astronomic Feature:
- Paspauskite REŽIMAS button until "SET LOCATION" appears.
- Use the rotary dial to select your state/region. Press OK.
- Further refine your location if prompted (e.g., North, Central, South within a state). Press OK.
- Paspauskite REŽIMAS to exit location setting.
- Vasaros laiko (DST) koregavimas: The timer is designed to automatically adjust for DST. Verify the setting under the "SET DST" menu option if available, or refer to the specific instructions for your model.
6. Naudojimo instrukcijos (programavimas)
The HB800RCH timer allows for up to 14 ON/OFF events (7 ON, 7 OFF) per week. Each event can be set for specific days or groups of days.
- Įėjimas į programos režimą: Paspauskite PROG button. The display will show "PROG 1 ON".
- Setting ON Time:
- With "PROG 1 ON" displayed, press OK. The hour will flash.
- Use the rotary dial to adjust the hour. Press OK.
- Adjust minutes and AM/PM similarly. Press OK.
- Day Selection: The display will show the days of the week. Use the rotary dial to select the desired days for this ON event. Options typically include:
- PIR ANT TRE KET PEN ŠEŠ SEK (Kasdien)
- PIR ANT TRE KET PEN (Darbo dienomis)
- ŠEŠ SEK (savaitgaliai)
- Individual days (MO, TU, etc.)
- Setting OFF Time:
- After setting the ON time for PROG 1, the display will automatically advance to "PROG 1 OFF". Press OK.
- Adjust the hour, minutes, AM/PM, and day selection for the OFF event using the same method as the ON time. Ensure the OFF time is appropriate for the ON time.
- Paspauskite OK patvirtinti.
- Programming Additional Events: After setting PROG 1 OFF, the display will advance to "PROG 2 ON". Repeat steps 2 and 3 for up to 7 ON/OFF programs.
- Išėjimas iš programos režimo: Paspauskite REŽIMAS button repeatedly until the current time is displayed, or wait for the timer to automatically exit program mode after a period of inactivity.
- Astronomic ON/OFF Events: To use the astronomic feature, select "DAWN" or "DUSK" instead of a specific time when setting an ON or OFF event. The timer will automatically calculate these times based on your set location and date. You can also set an offset (e.g., DUSK + 30 minutes).
- Rankinis nepaisymas: To temporarily turn the connected devices ON or OFF without affecting the programmed schedule, press the ĮJUNGTA/IŠJUNGTA button. The display will indicate "ON" or "OFF" and the timer will revert to the schedule at the next programmed event.
7. Priežiūra
The Intermatic HB800RCH timer requires minimal maintenance.
- Valymas: Išorę nuvalykite minkšta, damp šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių. Prieš valydami įsitikinkite, kad laikmatis yra atjungtas nuo elektros tinklo.
- Baterijos atsarginė kopija: The internal battery is designed to hold settings for an extended period (e.g., 3 months) during power outages. If the timer frequently loses settings after short power interruptions, the battery may need replacement. Refer to the manufacturer's guidelines for battery replacement, or contact customer support.
- Saugykla: If storing the timer for an extended period, ensure it is clean and dry. Store in a cool, dry place.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Laikmačio ekranas tuščias arba blankus. | No power to the unit; internal battery discharged. | Ensure the timer is securely plugged into a live outlet. Allow several minutes for the internal battery to charge. If problem persists, check the GFCI outlet. |
| Laikmatis neįsijungia/neišsijungia užprogramuotu laiku. | Incorrect programming; manual override active; power outage; sugedęs įrenginys. | Review programming steps carefully. Check if manual override is active (press ON/OFF button). Verify power supply. If settings are lost after power outages, the internal battery may be weak. |
| Sunku programuoti laikmatį. | Complex interface; instructions not followed precisely. | Refer to Section 6: Operating Instructions. Take your time and follow each step. Use the reset button if necessary to start fresh. |
| Astronominė funkcija neveikia tinkamai. | Incorrect date or location set. | Verify the current date and your geographical location settings (state/region) as described in Section 5. |
| Connected device does not turn on. | Device not plugged in correctly; device is faulty; timer is not supplying power. | Ensure the device is securely plugged into the timer's receptacle. Test the device by plugging it directly into a wall outlet. Check the timer's manual override and programmed schedule. |
9. Specifikacijos
- Modelis: HB800RCH
- Prekinis ženklas: Intermatic
- Elektrinis įvertinimas: 120 VAC, 60 Hz, 15 Amps Resistive, 1800 Watts
- Number of ON/OFF Events: Up to 14 per week (7 ON, 7 OFF)
- Talpyklos: 2 įžeminti lizdai
- Medžiaga: Plastikiniai
- Spalva: Juoda
- Prekės svoris: Approximately 1 pound (454 Grams)
- Matmenys: Maždaug 8.1 x 6.9 x 3.8 colio (pakuotės matmenys)
- Ekrano dydis: 2 colių
- UPC: 078275111400
10. Garantija ir palaikymas
Garantija: This Intermatic product comes with a Limited Lifetime Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Intermatic websvetainę.
Klientų aptarnavimas: For technical assistance, troubleshooting, or warranty claims, please contact Intermatic customer support. Contact information can typically be found on the manufacturer's websvetainėje arba ant produkto pakuotės.
Galite aplankyti „Intermatic“ parduotuvė „Amazon“ platformoje Norėdami gauti daugiau informacijos apie produktą.





