StarTech.com RKPW081915

StarTech.com 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (RKPW081915) Instruction Manual

Model: RKPW081915

1. Įvadas

This manual provides instructions for the installation, operation, and maintenance of your StarTech.com 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (Model RKPW081915). This Power Distribution Unit (PDU) is designed to provide reliable power distribution and surge protection for equipment within network server racks and cabinets.

2. Saugos informacija

ĮSPĖJIMAS: Nesilaikant šių saugos nurodymų, gali kilti gaisras, elektros smūgis arba būti kitaip sužalota ar apgadinta.

3. Pakuotės turinys

StarTech.com RKPW081915 PDU and Instruction Manual in packaging

Image: The StarTech.com PDU and its instruction manual, as typically found in the product packaging.

  • 1x 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (RKPW081915)
  • 1x naudojimo instrukcija

4. Produktas baigtasview

The StarTech.com RKPW081915 is a 1U horizontal rack-mountable PDU designed for efficient power distribution in server environments. It features 8 NEMA 5-15R outlets, a 6-foot power cord, and built-in surge protection.

Priekinio skydelio ypatybės

Priekyje ir gale view of the StarTech.com RKPW081915 PDU with labeled components

Vaizdas: Išsamus view of the PDU's front and back, highlighting the LED indicators, power switch, and outlets.

  • LED Surge Indicator: Šviečia, kai aktyvi apsauga nuo viršįtampių.
  • LED Ground Indicator: Illuminates when the PDU is properly grounded.
  • Power/Reset Switch: Controls power to all outlets and acts as a circuit breaker reset.

Galinio skydelio ypatybės

Galinis view of the StarTech.com RKPW081915 PDU showing the 8 NEMA 5-15R outlets and power cord

Image: Close-up of the rear of the PDU, displaying the eight power outlets and the attached power cord.

5. Sąranka

5.1 Išpakavimas

Carefully remove the PDU and all components from the packaging. Inspect for any damage during shipping. If any damage is found, contact your vendor immediately.

5.2 Montavimas ant stovo

The RKPW081915 PDU is designed for horizontal mounting in any standard 19-inch server rack that is 4 inches (10.16 cm) deep or greater. It occupies 1U of rack space.

  1. Align the mounting ears of the PDU with the desired rack unit (U) on your server rack.
  2. Secure the PDU to the rack using appropriate rack screws (not included). Ensure both sides are firmly attached.
StarTech.com RKPW081915 PDU installed horizontally in a server rack

Image: The PDU mounted horizontally within a server rack, demonstrating its 1U form factor and integration with other equipment.

StarTech.com RKPW081915 PDU with dimensions and rack compatibility information

Image: A visual representation of the PDU's height (1U) and cable length (6ft), confirming its compatibility with standard 19-inch racks.

5.3 Įrenginių prijungimas

  1. Ensure the PDU's power/reset switch is in the OFF position.
  2. Plug the power cords of your network and server equipment into the 8 NEMA 5-15R outlets on the rear of the PDU.
  3. Connect the integrated 6-foot power cord of the PDU to a grounded 120V/15A power source.

Video: Demonstrates the installation of a rack-mounted power strip, showing how it integrates into a server rack and connects to devices.

Video: An official product video from StarTech.com showcasing the 8 Outlet Horizontal 1U Rack Mount PDU Power Strip for network server racks, highlighting its surge protection features.

Video: A demonstration of the StarTech 8 Outlet Horizontal 1U Rack Mount PDU, showing its physical attributes and how it fits into a rack setup.

Vaizdo įrašas: Viršijimasview of an 8 Outlet Rack-Mount PDU, detailing its features and benefits for organizing power in a rack system.

Video: A demonstration of a PDU Outlet Horizontal, highlighting its design and functionality for power distribution.

6. Naudojimo instrukcijos

6.1 Įjungimas / išjungimas

To power on the connected equipment, press the Power/Reset switch on the front panel to the ON position. To power off, press the switch to the OFF position.

6.2 LED indikatoriai

6.3 automatinis jungiklis

The Power/Reset switch also functions as a circuit breaker. If an overload occurs, the switch will trip to the OFF position, cutting power to all connected devices to prevent damage. To reset the circuit breaker, reduce the load on the PDU and then press the switch back to the ON position.

7. Priežiūra

7.1 Valymas

To clean the PDU, ensure it is powered off and disconnected from the main power source. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.

7.2 Reguliarūs patikrinimai

8. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Prijungtiems įrenginiams netiekiamas maitinimas.PDU is off or circuit breaker tripped.Ensure the Power/Reset switch is ON. If it tripped, reduce the load and reset the switch.
Ground LED is off.Netinkamas įžeminimas.Ensure the PDU is plugged into a properly grounded outlet. Check the building's electrical wiring.
Surge LED is off.Apsauga nuo viršįtampių buvo pažeista.The PDU's surge protection may no longer be active. Replace the unit to ensure continued protection.
Devices are not receiving enough power.PDU is overloaded.Reduce the total power draw of connected devices to stay within the 15A limit.

9. Specifikacijos

FunkcijaDetalė
Modelio numerisRKPW081915
Prekės ženklas„StarTech.com“
Iš viso maitinimo lizdų8 x NEMA 5-15R
Įvesties tomastage120 voltų kintamoji srovė
Dabartinis reitingas15 Amps
Maitinimo laido ilgis6 pėdos (1.8 metro)
Rack Unit (RU)1U
MontavimasHorizontal 19-inch Rack Mount
Matmenys (IxPxH)19 x 3.76 x 1.68 colio (48.26 x 9.55 x 4.27 cm)
Prekės svoris4.85 svaro (2.2 kg)
Ypatingos savybėsMountable, On/Off Switch, Surge Protection, Built-in Circuit Breaker
Casing MedžiagaRugged Steel

10. Garantija ir palaikymas

This StarTech.com product is backed by a lifetime warranty, ensuring long-term reliability and peace of mind. In addition, free lifetime 24/5 multi-lingual technical assistance is available to help you with any questions or issues you may encounter.

For technical support or warranty claims, please visit the official StarTech.com websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą, kad galėtumėte patvirtinti garantiją.

Susiję dokumentai - RKPW081915

Preview „StarTech.com“ 14 išėjimų 1U stovo montuojamas maitinimo blokas su apsauga nuo viršįtampių – trumpas paleidimo vadovas
Greitas „StarTech.com 1415B8H-RACK-PDU-SP“, 1U stovo tipo maitinimo bloko su apsauga nuo viršįtampių ir 14 lizdų, pradžios vadovas, įskaitant stovo ir vertikalaus montavimo instrukcijas.
Preview „StarTech.com“ 1U stovo montuojamas maitinimo blokas su 13 išėjimų – 2.4 m kabelis | 1315B8H-RACK-PDU
Greito paleidimo vadovas, skirtas „StarTech.com“ 1U stovo tipo maitinimo blokui (1315B8H-RACK-PDU), turinčiam 13 NEMA 5-15R lizdų, 2.4 m maitinimo kabelį ir 19 colių stovo montavimo galimybes. Į komplektą įeina montavimo instrukcijos ir saugos įspėjimai.
Preview StarTech.com Adjustable 4 Post Open Frame Server Rack User Manual
This user manual provides assembly instructions, safety warnings, package contents, requirements, installation steps, operation details, and warranty information for the StarTech.com Adjustable 4 Post Open Frame Server Rack (SKU: 4POSTRACKxU).
Preview StarTech.com Adjustable Wall Mount Bracket - Flat-Pack Quick-Start Guide
Quick-start guide for the StarTech.com Adjustable Wall Mount Bracket - Flat-Pack, detailing features, requirements, package contents, assembly, and wall mounting instructions for server and networking equipment.
Preview StarTech.com 1HE Rackmontage PDU mit 14 Ausgängen und Überspannungsschutz – Schnellstartanleitung
Schnellstartanleitung für die StarTech.com 1HE Rackmount PDU (Modell 1415B8H-RACK-PDU-SP) mit 14 NEMA 5-15R-Ausgängen, Überspannungsschutz und einem 2,4 m langen Stromkabel. Enthält Installationsanweisungen für Rackmontage und vertikale Montage.
Preview StarTech.com Adjustable Depth Open Frame Wall Mount Rack Quick Start Guide
Quick start guide for StarTech.com adjustable depth open frame wall mount racks, including product IDs, installation steps, package contents, and specifications.