Intermatic RC613

Intermatic RC613 Receiver Instruction Manual

1. Produktas baigtasview

The Intermatic RC613 Receiver is a component of a two-part remote control system designed for switching electrical loads. It functions as an ordinary ON/OFF switch but also responds to signals from a handheld transmitter (sold separately). This module is suitable for both indoor and outdoor applications, managing various switching tasks around residential or agricultural settings. Users can activate or deactivate connected loads (such as lights or pumps) remotely using the transmitter or directly via the ON/OFF button on the receiver itself. A single transmitter can control up to three receivers, and each receiver can be programmed with a unique code.

The RC613 model includes a manual ON/OFF button and is intended for installation at the load's location. The RC613L model is identical but features extra-long (36-inch) leads.

2. Savybės

3. Important Considerations for Installation and Operation

4. Montavimo instrukcijos

Before beginning installation, ensure all power to the circuit is turned off at the breaker. Follow all local electrical codes and safety guidelines.

Intermatic RC613 Receiver with ON/OFF button and wiring leads

Figure 1: Intermatic RC613 Receiver. This image shows the receiver unit with its ON/OFF button and wiring connections.

  1. Imtuvo montavimas: Attach the receiver module to the top of an outdoor-grade junction box. Ensure the entire assembly is raintight.
  2. Vietos pasirinkimas: Choose an appropriate location for installation, considering the "Important Considerations" section above. Install the receiver assembly on a vertical surface or other suitable support using appropriate hardware.
  3. Vamzdynas ir laidai: Prepare necessary conduit runs as required by your installation layout and pull in the specified conductors.
  4. Laidų jungtys: Follow the wiring diagram provided with your product. Typically, the White lead connects to the 120V Neutral, the Black lead connects to the 120V Line, and the Red lead connects to the Load. Always verify wire functions with a multimeter if unsure, as wire colors may vary in existing installations.
  5. Testing and Securing: Turn on power and test the installation using the ON/OFF button on the receiver module. After successful testing, replace the junction box cover, ensuring the installation is secure and raintight.
  6. Transmitter Linking: Refer to the "Operation" section for instructions on linking a transmitter button with the receiver.

5. Operacija

5.1 Linking RC939 Transmitter Button with the RC613 Receiver

This procedure outlines how to pair an RC939 transmitter (sold separately) with your RC613 receiver.

  1. Išvalyti esamus kodus: Press and hold the blue code set button on the receiver for 15 seconds, then release it. This clears any previously stored codes.
  2. Aktyvuoti siųstuvą: Insert a paper clip into the small hole on the bottom right side of the remote transmitter until the red indicator light illuminates. Note: The illuminated LED may be difficult to see in direct sunlight.
  3. Initiate Linking on Receiver: Return to the receiver and press and release the blue code set button.
  4. Select Transmitter Button: Choose the specific button on the remote transmitter that you wish to link. Slowly press and release this button.
  5. First Click Confirmation: After the 7th slow press and release, you should hear the relay inside the receiver click.
  6. Subsequent Clicks: Continue to slowly press and release the remote button. The relay should now click approximately every 4th press.
  7. Complete Linking: Repeat the slow press and release action until you hear the relay click 3 or 4 more times.
  8. Save Code: Press one of the other two buttons on the remote transmitter to save the newly linked code.

5.2 Linking Multiple Transmitters with a Receiver

Up to three different transmitters can control a single RC613 receiver.

  1. To link additional transmitters, repeat steps 1 through 4 from the "Linking RC939 Transmitter Button with the RC613 Receiver" section for each new transmitter.

6. Specifikacijos

Gamintojas Intermatic
Dalies numeris RC613
Prekės modelio numeris RC613
Prekės svoris 8.8 uncijos
Gaminio matmenys 8 x 8 x 8 colio
Medžiaga ABS
Sertifikavimas CSA
Ypatingos savybės Enclosure: beige outdoor grade plastic, Indoor or outdoor use, Operate as ordinary ON/OFF switches
Ryšio technologija Laidinis
Valdiklio tipas Mygtukas
Reikalingos baterijos Nr

7. Informacija apie garantiją

The Intermatic RC613 Receiver comes with a 1 metų garantija from the date of purchase. For detailed terms and conditions, please refer to the official warranty documentation included with your product or contact Intermatic customer support.

8. Pagalba klientams

For technical assistance, troubleshooting, or warranty claims, please contact Intermatic customer support. Visit the official Intermatic websvetainėje, kurioje rasite kontaktinę informaciją ir papildomus išteklius.

Intermatic pareigūnas Websvetainė: www.intermatic.com

Susiję dokumentai - RC613

Preview Intermatic RC613 & RC613L Single Channel Radio Receiver Installation, Operation & Service Manual
Comprehensive guide for Intermatic RC613 and RC613L Single Channel Radio Receivers, covering installation, operation, troubleshooting, and warranty information for pool and spa equipment control.
Preview „Intermatic RC613 RC613L“ radijo imtuvo įrengimo ir naudojimo instrukcija
Installation, operation, and service manual for Intermatic RC613 and RC613L single-channel radio receivers. Learn how to safely install and use these remote-control modules for pool/spa equipment and other residential applications, including troubleshooting and warranty information.
Preview Intermatic RC939 Three-Channel Radio Transmitter Installation, Operation & Service Manual
Comprehensive guide for the Intermatic RC939 Three-Channel Radio Transmitter, detailing installation, operation, linking procedures, battery replacement, and warranty information for pool and spa equipment control.
Preview „Intermatic EJ341C/EJ343C“ apšvietimo laikmačio jungiklio įrengimo ir programavimo vadovas
Išsamios „Intermatic EJ341C“ (vienpolio) ir EJ343C (trijų padėčių) apšvietimo laikmačių jungiklių įrengimo ir programavimo instrukcijos. Apima sąranką, valdiklius, programavimo metodus, trikčių šalinimą ir specifikacijas.
Preview Intermatic ET2825 Electronic 2-Circuit Astronomic 7-Day Time Switch: Installation and Setup Guide
This guide provides detailed instructions for the installation, setup, and programming of the Intermatic ET2825 Electronic 2-Circuit Astronomic 7-Day Time Switch. Learn how to configure schedules, DST, and Astro zones for efficient load control.
Preview „Intermatic EI40C/E140AC“ elektroninis automatinis išsijungimo laikmatis
Sužinokite apie „Intermatic EI40C/E140AC“ elektroninį automatinio išjungimo laikmatį. Šiame vadove aprašomas įrengimas, tokios funkcijos kaip programuojamas laikas ir įspėjamieji signalai, bei trikčių šalinimas, siekiant efektyviai valdyti apkrovą gyvenamosiose ir komercinėse patalpose.