Intermatic EI600WC Decorator Digital In-Wall 7-Day Astronomic Timer Instruction Manual

1. Įvadas

This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Intermatic EI600WC Decorator Digital In-Wall 7-Day Astronomic Timer. This device is designed to provide automatic control of lighting and other electrical loads, enhancing energy efficiency, security, and convenience through its advanced scheduling features.

2. Saugos informacija

ĮSPĖJIMAS: Risk of electric shock. Improper installation can result in serious injury or death.

• Always disconnect power at the circuit breaker or fuse box before installing or servicing the timer.
• Montavimą turi atlikti kvalifikuotas elektrikas arba jis turi laikytis visų vietinių ir nacionalinių elektros kodeksų.
• Do not use this timer with loads exceeding its specified ratings (15 Amps, 120-277 VAC).
• Įsitikinkite, kad visos laidų jungtys yra tvirtos ir tinkamai izoliuotos.
• Šis prietaisas skirtas naudoti tik patalpose.

3. Produktas baigtasview ir Savybės

The Intermatic EI600WC is a sophisticated digital in-wall timer designed for versatile control of electrical loads. Key features include:

• Astronominė ypatybė: Automatically adjusts ON/OFF times based on local sunset and sunrise, eliminating the need for manual seasonal adjustments.
• 7 dienų programa: Offers up to 40 ON/OFF operations per week, allowing for unique schedules each day.
• Automatinis vasaros laiko (DST) reguliavimas: Automatiškai atnaujinama atsižvelgiant į DST pakeitimus.
• Neutralaus laido nereikia: Simplifies installation in older homes or where a neutral wire is not readily available.
• 3-Way Switch Compatible: Can be used in both single-pole and 3-way (multi-way) switch configurations.
• Baterijos atsarginė kopija: Maintains timekeeping and program settings for up to three years during power outages using an included CR2 lithium battery.
• Nekintamoji atmintis: Stores all user program selections permanently.
• Senkančios baterijos indikatorius: Įspėja, kai reikia pakeisti bateriją.
• Isolated Single Pole Single Throw Switch: Allows the timer to switch various load types.
• Veikimo dažnis: 50 / 60Hz.
• ttage Suderinamumas: 120-277 VAC, up to 15 Amps.

3.1 paveikslas: Priekyje view of the Intermatic EI600WC timer installed in a standard decorator wall plate.

3.2 paveikslas: Priekyje view of the Intermatic EI600WC timer module, showing the digital display and the cover for programming buttons.

3.3 paveikslas: Priekyje view of the Intermatic EI600WC timer with the lower cover opened, revealing the 'mode', 'on/off', '+', and '-' programming buttons.

4. Montavimas

Before beginning installation, ensure power is disconnected at the circuit breaker. This timer is designed for single-pole or 3-way switch applications and does not require a neutral wire connection.

4.1. Reikalingi įrankiai

• Atsuktuvas (Phillips ir plokščia galvutė)
• Įrankių lagaminai
• Elektrinė juosta
• ttage testeris

4.2. Laidų sujungimo instrukcijos

Refer to the wiring diagrams below and on the product label for correct connections. The EI600WC is a 3-wire design, compatible with both single-pole and 3-way switch setups.

4.1 paveikslas: Excerpt from the instruction manual showing wiring diagrams and programming steps.

4.2.1. Single-Pole Switch Installation

1. Išjunkite maitinimą prie grandinės pertraukiklio.
2. Pašalinkite esamą sieninį jungiklį.
3. Identify the two wires connected to the switch. One is the JUODAS LYGAS from the power source, and the other is the RAUDONAS LAIDAS prie krovinio.
4. Prijunkite JUODAS LYGAS from the wall to the timer's JUODAS LYGAS.
5. Prijunkite RAUDONAS LAIDAS from the wall to the timer's RAUDONAS LAIDAS.
6. Connect the timer's ŽALIA LAIDAS to the grounding screw in the box.
7. Mount the timer into the wall box and install the wall plate.
8. Atkurti galią.

4.2.2. 3-Way Switch Installation

For 3-way applications, the EI600WC replaces one of the existing 3-way switches. The other 3-way switch will be replaced with a standard single-pole switch or remain as a 3-way switch if desired, but only one timer can control the load.

1. Išjunkite maitinimą prie grandinės pertraukiklio.
2. Remove both existing 3-way switches.
3. At the location where the EI600WC will be installed:
   • Identifikuokite COMMON WIRE (usually darker or marked) from the power source or load.
   • Connect the timer's JUODAS LYGAS prie COMMON WIRE nuo sienos.
   • Connect the timer's RAUDONAS LAIDAS to one of the remaining traveler wires.
   • Cap the other traveler wire with a wire nut; it will not be used by the timer.
   • Connect the timer's ŽALIA LAIDAS to the grounding screw in the box.
4. At the other 3-way switch location:
   • Prijunkite COMMON WIRE to the traveler wire that was connected to the timer's RAUDONAS LAIDAS.
   • Connect the other two wires together with a wire nut (these are the remaining traveler and the unused common from the original 3-way switch).
   • Install a standard single-pole switch or a 3-way switch wired as a single-pole switch.
5. Mount the timer and the other switch into their respective wall boxes and install wall plates.
6. Atkurti galią.

Pastaba: If the timer clock and the load lamp operate when the timer is removed from the wall box, but the timer does not operate the load lamp when installed, then the inverter wires 'A' and 'B' are reversed. Reverse the timer's 'A' and 'B' wires and retest.

5. Pradinė sąranka ir konfigūracija

After installation and power restoration, the timer display will show "12:00" and "PM". The battery indicator will flash if the battery needs replacement. Open the lower cover to access the programming buttons.

5.1. Dabartinio laiko ir datos nustatymas

1. Paspauskite REŽIMAS button until "SET TIME" appears on the display.
2. Naudokite + ir - mygtukais nustatykite valandas. Paspauskite REŽIMAS patvirtinti.
3. Minučių reguliavimas naudojant + ir -. Paspauskite REŽIMAS patvirtinti.
4. Adjust the current day of the week (1=Monday, 7=Sunday). Press REŽIMAS patvirtinti.
5. Adjust the current year. Press REŽIMAS patvirtinti.
6. Adjust the current month. Press REŽIMAS patvirtinti.
7. Adjust the current day of the month. Press REŽIMAS to exit "SET TIME".

5.2. Setting Geographic Location (Latitude/Longitude)

This setting is crucial for the astronomic feature to function accurately. You will need your location's latitude and longitude. Many online resources can provide this information.

1. Paspauskite REŽIMAS button until "SET LAT" appears.
2. Naudokite + ir - buttons to adjust the latitude value. The display shows two digits, representing degrees. For example, "42" means 42.0 degrees. Press REŽIMAS patvirtinti.
3. "SET LONG" will appear. Use + ir - to adjust the longitude value. Press REŽIMAS patvirtinti ir išeiti.

Pastaba: The timer assumes the right-most digit is after a decimal point for latitude and longitude. For example, if your latitude is 42.5, you would enter "425". If it's 42.0, you would enter "420".

5.3. Vasaros laiko (DST) reguliavimas

The timer can automatically adjust for Daylight Saving Time. This feature is typically enabled by default.

1. Paspauskite REŽIMAS button until "DST" appears.
2. Naudokite + or - button to toggle between "ON" (automatic DST adjustment) and "OFF".
3. Paspauskite REŽIMAS patvirtinti ir išeiti.

6. Operating Instructions and Programming

The EI600WC allows for flexible programming with up to 40 ON/OFF operations per week. Programs can be set for specific times or utilize the astronomic feature.

6.1. Setting Initial ON/OFF Times

You can set up to 20 ON/OFF programs. Each program can be assigned to specific days or all days of the week.

1. Paspauskite REŽIMAS until "SET PROG" appears. The display will show "PGM 1 ON".
2. Naudokite + or - to select the desired program number (1-20). Press REŽIMAS.
3. The display will show "ON". Use + or - to set the ON time. You can select a specific time (e.g., 6:00 PM) or "DUSK" for astronomic ON. Press REŽIMAS.
4. Select the days for this ON event (e.g., "ALL" for all days, "WK" for weekdays, "WE" for weekends, or individual days). Press REŽIMAS.
5. The display will show "OFF". Use + or - to set the OFF time. You can select a specific time (e.g., 11:00 PM) or "DAWN" for astronomic OFF. Press REŽIMAS.
6. Select the days for this OFF event (must match the ON event days). Press REŽIMAS norėdami išsaugoti programą.
7. Repeat for additional programs. Press REŽIMAS repeatedly to exit programming mode.

6.2. Revising an ON or OFF Setting

1. Paspauskite REŽIMAS until "SET PROG" appears.
2. Naudokite + or - to select the program number you wish to revise. Press REŽIMAS.
3. The display will show the current ON time. Use + or - to change it. Press REŽIMAS.
4. The display will show the current OFF time. Use + or - to change it. Press REŽIMAS išsaugoti.

6.3. Deleting an ON or OFF Setting

1. Paspauskite REŽIMAS until "SET PROG" appears.
2. Naudokite + or - to select the program number you wish to delete. Press REŽIMAS.
3. When "ON" is displayed, press ĮJUNGTA/IŠJUNGTA button. "SKIP" will appear, indicating the ON event is deleted. Press REŽIMAS.
4. When "OFF" is displayed, press ĮJUNGTA/IŠJUNGTA button. "SKIP" will appear, indicating the OFF event is deleted. Press REŽIMAS išsaugoti.

6.4. Operating Modes: AUTO, RANDOM, MANUAL

The timer has three operating modes, selected by pressing the ĮJUNGTA/IŠJUNGTA button when the cover is closed.

• AUTOMATINIS: The timer operates according to the programmed ON/OFF times. This is the default mode.
• NETINKAMA: The timer will turn ON and OFF at random times, +/- 20 minutes from the programmed times. This feature can enhance security by simulating occupancy.
• VADOVAS: The load is turned ON or OFF manually by pressing the ĮJUNGTA/IŠJUNGTA button. The timer will remain in this state until the next programmed event, at which point it will revert to AUTO mode.

7. Priežiūra

7.1. Baterijos keitimas

The EI600WC timer uses one CR2 lithium battery (included) for timekeeping and program retention during power outages. The battery typically lasts up to three years. A low battery indicator will appear on the display when replacement is needed.

1. Open the lower cover of the timer to access the battery compartment.
2. Carefully slide out the old CR2 battery.
3. Įdėkite naują CR2 ličio bateriją, užtikrindami teisingą poliškumą.
4. Uždarykite akumuliatoriaus skyriaus dangtelį.

Pastaba: Replacing the battery does not erase programmed settings due to non-volatile memory.

8. Problemų sprendimas

9. Specifikacijos

• Modelis: EI600WC
• Prekinis ženklas: Intermatic
• ttage: 120-277 VAC
• Amppakilimas: Iki 15 Amps
• Dažnis: 50/60 Hz
• Jungiklio tipas: Vienpolis arba tripusis
• Montavimo tipas: Wall (in-wall)
• Matmenys (A x P x G): 4.12" x 1.81" x 1.75"
• Medžiaga: Metalas, Plastikas
• Spalva: Baltas
• Baterija: 1 x CR2 ličio (pridedama)
• Baterijos veikimo laikas: Iki 3 metų
• Darbinė temperatūra: -4°F iki 122°F (nuo -20°C iki 50°C)
• Sertifikavimas: CSA (Canada and US)
• UPC: 078275101418

9.1 paveikslas: Dimensional drawing of the Intermatic EI600WC timer, showing height (4.12"), width (1.81"), and depth (1.75").

10. Garantija ir palaikymas

10.1. Informacija apie garantiją

This Intermatic product is covered by a warranty that typically involves product replacement for defects. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Intermatic websvetainę.

10.2. Pagalba klientams

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Intermatic customer support. You can find contact information on the official Intermatic websvetainėje arba per savo produkto pardavėją.