1. Įvadas
The VOLTCRAFT VC-32 Rotary Field Tester is a specialized instrument designed for determining and verifying the phase sequence in three-phase electrical networks. This device provides a clear, simultaneous display of existing phases and indicates the direction of the rotary field. Its robust design ensures reliable contact through 4 mm spring-loaded plugs, making it an essential tool for electricians and technicians working with three-phase systems.
2. Saugos informacija
ĮSPĖJIMAS: Always observe general electrical safety regulations and local accident prevention rules when working with electrical installations. Failure to do so can result in serious injury or death.
- This device is rated for CAT III 400 V. Do not use it on circuits exceeding these voltage limits or in environments not suitable for CAT III measurements.
- Before each use, inspect the tester and its leads for any signs of damage. Do not use if damaged.
- Ensure proper insulation and secure connections when attaching the test leads to the circuit.
- Never touch the metal parts of the test probes when connected to a live circuit.
- Naudokite tinkamas asmenines apsaugos priemones (AAP), tokias kaip izoliuotos pirštinės ir apsauginiai akiniai.
- The device is designed for professional use. If you are not qualified, do not attempt to use this tester.
3. Produktas baigtasview
The VOLTCRAFT VC-32 Rotary Field Tester is a compact and durable device. It features three integrated test leads, each terminated with a 4 mm spring-loaded plug, designed for secure and reliable connection to electrical terminals.
Figure 3.1: The VOLTCRAFT VC-32 Rotary Field Tester with its three test leads and protective caps. The device is black and grey, with blue, red, and black test leads.
3.1 Komponentai
- Tester Unit: The main body of the device, housing the indicators.
- Bandymo laidai: Three permanently attached leads (typically blue, red, black) with 4 mm spring-loaded plugs.
- LED indikatoriai: Lights on the front panel to show phase presence (L1, L2, L3) and rotary field direction (clockwise/counter-clockwise).
3.2 pav. Iš arti view of the VC-32's front panel, highlighting the LED indicators for phase presence and rotation direction.
4. Sąranka
The VOLTCRAFT VC-32 is a passive device and does not require batteries for operation. It draws power directly from the circuit being tested.
4.1 Bandymo laidų prijungimas
- Ensure the circuit to be tested is within the device's specified voltage range (CAT III 400 V).
- Carefully connect the three test leads to the respective phases (L1, L2, L3) of the three-phase electrical network. The leads are typically color-coded for easier identification, though specific phase assignments should always be verified according to local standards.
- Ensure that the spring-loaded plugs make firm and reliable contact with the terminals.
5. Naudojimo instrukcijos
Once the test leads are securely connected to the three-phase circuit, the VC-32 will automatically begin its measurement.
Figure 5.1: User connecting the VC-32 to a three-phase electrical socket for testing.
5.1 Rezultatų interpretavimas
- Phase Presence: The LEDs labeled L1, L2, and L3 will illuminate if the corresponding phases are present and within the operational voltage range. If an LED does not light up, it indicates a missing or insufficient voltage toje fazėje.
- Rotary Field Direction: The device features two additional LEDs, typically indicating clockwise (right arrow) or counter-clockwise (left arrow) rotation. Only one of these LEDs should illuminate to indicate the detected phase sequence.
- Correct Rotation: If the desired rotation direction LED illuminates, the phase sequence is correct.
- Incorrect Rotation: If the undesired rotation direction LED illuminates, the phase sequence is incorrect. To correct this, swap any two of the phase connections (e.g., L1 and L2) at the source or load, then re-test.
6. Priežiūra
The VOLTCRAFT VC-32 Rotary Field Tester requires minimal maintenance to ensure its longevity and accuracy.
- Valymas: Clean the device and test leads with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.
- Saugykla: Store the tester in a dry, dust-free environment, away from direct sunlight and extreme temperatures. Keep the protective caps on the test probes when not in use.
- Patikra: Regularly inspect the test leads and the device casing for any physical damage, cuts, or cracks. Damaged equipment must be taken out of service immediately and repaired by qualified personnel or replaced.
7. Problemų sprendimas
If you encounter issues with your VC-32 Rotary Field Tester, refer to the following common troubleshooting steps:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| No LEDs illuminate. | Nr ttage present on any phase, or poor connection. | Verify the power supply to the circuit. Check all test lead connections for secure contact. |
| Only one or two phase LEDs (L1, L2, L3) illuminate. | Missing phase(s) or insufficient voltage on specific phase(s). | Check the integrity of the circuit and the power supply for the non-illuminated phases. Ensure test leads are correctly connected. |
| No rotary field direction LED illuminates, but phase LEDs are on. | Unstable phase conditions or specific fault. | Re-check all connections. If the problem persists, consult a qualified electrician. |
8. Specifikacijos
Technical specifications for the VOLTCRAFT VC-32 Rotary Field Tester:
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | VOLTRAFTAS |
| Modelio numeris | VC-32 |
| Matavimo kategorija | CAT III 400 V |
| Minimalus veikimo tūristage | 400 voltų |
| Didžiausias darbinis tūristage | 400 voltų |
| Viršutinė vardinė temperatūra | 40 laipsniai Celsijaus |
| Pirminė funkcija | Rotary Field and Phase Sequence Testing |
| Gaminio matmenys (I x P x A) | 10.5 x 7.1 x 3.1 cm |
| Produkto svoris | 9.07 gramų |
| Spalva | Juoda ir pilka |
| Maitinimo šaltinis | Self-powered (draws power from circuit) |
9. Garantija ir palaikymas
VOLTCRAFT products are known for their solid manufacturing and innovative technology. This product comes with a 1 metų atsarginių dalių tiekimo garantija.
For technical support, service, or warranty claims, please contact your VOLTCRAFT retailer or visit the official VOLTCRAFT website for further assistance. Ensure you have your product model number (VC-32) and purchase information available when seeking support.
