Watts WR-100 Water Filter Wrench Instruction Manual

1. Įvadas

The Watts WR-100 Water Filter Wrench is a specialized tool designed for the removal of water filter housings. It facilitates the loosening of the housing body from the cap, primarily for the purpose of replacing filter cartridges. This wrench is intended for use with residential and RV filter sumps.

Svarbu: This wrench is designed for atsipalaidavimas filter housings only. Do NOT use this wrench to tighten the sump, as this can lead to overtightening and damage.

2. Sąranka

Before attempting to change a water filter, ensure the following:

Išjunkite vandens tiekimą į filtrų sistemą.
Relieve any pressure in the system by opening a nearby faucet or using a pressure relief button on the filter housing, if available.
Have a bucket or towels ready to catch any spilled water during the filter change process.
Ensure you have the correct replacement filter cartridge.

3. Naudojimo instrukcijos

Follow these steps to use the Watts WR-100 Water Filter Wrench:

Position the circular end of the WR-100 wrench over the filter housing sump.
Slide the wrench down until it achieves a snug fit around the housing, engaging the teeth or ridges on the wrench with those on the housing.
Apply firm, counter-clockwise pressure to the wrench handle to loosen the filter housing. The housing should begin to unscrew.
Atlaisvinus, korpusą paprastai galima atsukti ranka.
Remove the old filter cartridge and proceed with replacing it according to your filter system's specific instructions.

Watts WR-100 Water Filter Wrench, white plastic tool with a circular end.

Figure 1: The Watts WR-100 Water Filter Wrench. This image shows the Watts WR-100 Water Filter Wrench, a white plastic tool designed for removing water filter housings. The circular end is used to grip the filter sump.

4. Priežiūra

The Watts WR-100 Water Filter Wrench requires minimal maintenance:

Po naudojimo nuvalykite veržliaraktį skelbimų lentoje.amp šluoste, kad pašalintumėte vandenį ar nešvarumus.
Store the wrench in a dry place, away from direct sunlight or extreme temperatures, to prevent material degradation.
Inspect the wrench periodically for any signs of cracks or damage. If damaged, replace the wrench to ensure safe and effective operation.

5. Problemų sprendimas

Wrench does not fit the housing: Ensure the wrench is compatible with your specific filter housing model. The WR-100 is designed for Watts residential/RV housings. Some older or non-Watts housings may have different dimensions.
Housing is too tight to loosen:
- Verify that the water supply is completely off and pressure has been relieved.
- Apply steady, firm pressure. Avoid sudden jerking motions.
- If the housing is extremely tight, ensure the wrench is fully engaged. In some cases, a second person might be needed to stabilize the filter system while the wrench is turned.
Wrench slips: Ensure the wrench is properly seated and snug against the housing. The housing and wrench should be dry to maximize grip.

6. Specifikacijos

Modelio numeris	WR-100
Prekės ženklas	Vatai
Spalva	Baltas
Medžiaga	Plastikiniai
Prekės ilgis	Maždaug 10 colių
Prekės svoris	Maždaug 2.08 uncijų (0.13 svaro)
Galvos stilius	Apvalus
Veikimo režimas	Mechaninis

7. Informacija apie garantiją

Warranty information for the Watts WR-100 Water Filter Wrench is not explicitly provided in the product details. For specific warranty inquiries, please contact Watts customer support directly.

8. Parama

For further assistance, technical support, or questions regarding the Watts WR-100 Water Filter Wrench, please refer to the official Watts website or contact their customer service department. Contact information can typically be found on the manufacturer's packaging or websvetainę.

Taip pat galite apsilankyti Watts Store on Amazon Norėdami gauti papildomos informacijos apie produktą.

	„Watts“ gryno vandens filtravimo ir valymo katalogas Peržiūrėkite išsamų „Watts Pure Water“ pažangių vandens filtravimo ir valymo sistemų katalogą. Atraskite sprendimus gyvenamosioms, komercinėms ir pramoninėms reikmėms, įskaitant atvirkštinio osmoso sistemas, vandens minkštiklius, integruotus filtrus ir būtiniausius priedus, užtikrinančius aukščiausią vandens kokybę.
	Watts PWDWLCV2 2-Stage LCV po stalviršiu montuojama vandens filtro sistema: įrengimo, naudojimo ir priežiūros vadovas Išsamus „Watts PWDWLCV2 2-S“ įrengimo, naudojimo ir priežiūros vadovastage LCV po stalviršiu montuojama vandens valymo sistema. Apima veikimo parametrus, filtro keitimo instrukcijas, dalių sąrašą ir technines specifikacijas.
	Specifikacijos Technika Serija Vatai SL100XL, L100XL, LL100XL, LLL100XL Technologijų specifikacijos yra visiškai suderintos su iškrovimo temperatūros ir spaudimo sriubomis, naudojant Watts serijas SL100XL, L100XL, LL100XL ir LLL100XL. Išsami informacija apie charakteristikas, matmenis, montavimą ir skalbimo mašiną.
	Watts PWDWLCV2 2-Stage LCV po stalviršiu montuojama vandens filtro sistema: įrengimo, naudojimo ir priežiūros vadovas Išsamus „Watts PWDWLCV2 2-S“ įrengimo, naudojimo ir priežiūros vadovastage LCV Under Counter Water Treatment System. Includes operational parameters, parts list, filter change instructions, and technical specifications.
	Watts BB-C100 Carbon Block Filter Cartridge Replacement Instructions Detailed instructions for replacing the Watts BB-C100 Carbon Block Filter Cartridge. This guide covers the procedure for systems BB-S100 and BB-S101, focusing on the reduction of lead, PFOA/PFOS, cysts, and chlorine taste and odor.
	„Watts Vision P-6670“ grindų šildymo termostato susiejimo vadovas Trumpas „Watts Industries“ vadovas, kaip susieti „Watts Vision“ kambario termostatus su P-6670 pagrindiniu įrenginiu, skirtu grindų šildymo sistemoms. Apima nustatymo veiksmus ir nustatymo iš naujo instrukcijas.

Watts WR-100