Įvadas
Thank you for choosing the Promed Nailfan Dust Extractor. This professional device is designed to provide a clean and dust-free working environment for nail technicians and enthusiasts. Its powerful suction and quiet operation ensure efficient dust collection, contributing to a healthier and more comfortable workspace. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.
Saugos instrukcijos
To prevent injury or damage to the device, always adhere to the following safety precautions:
- Read all instructions carefully before initial use and keep this manual for future reference.
- Nenaudokite prietaiso šalia vandens arba itin drėgnoje aplinkoje.
- Ensure the power cord and plug are not damaged before connecting to a power source. Do not use if damaged.
- Always unplug the device from the power outlet before cleaning or performing any maintenance.
- Use the device only for its intended purpose as a nail dust extractor.
- Keep hands, hair, and loose clothing away from the fan opening during operation.
- Darbo metu neuždenkite oro įleidimo ir išleidimo angų.
- Šis prietaisas nėra skirtas naudoti asmenims (įskaitant vaikus), kurių fizinės, jutimo ar psichikos negalios arba neturintys patirties ir žinių, nebent už jų saugumą atsakingas asmuo juos prižiūrėtų arba instruktuotų, kaip naudoti prietaisą.
Pakuotės turinys
Išpakuodami patikrinkite pakuotės turinį:
- Promed Nailfan Dust Extractor Unit
- Reusable Filter (pre-installed)
- Additional Reusable Filter
- Maitinimo kabelis
- Vartotojo vadovas
Sąranka
Follow these steps to set up your Promed Nailfan:
- Išpakuokite įrenginį: Atsargiai išimkite visus komponentus iš pakuotės.
- Padėties nustatymas: Place the Promed Nailfan on a stable, flat, and dry surface in your workspace. Ensure there is adequate ventilation around the unit.
- Filtro diegimas: The reusable filter should already be installed. If not, gently slide the filter into its designated slot under the grille until it is securely in place.
- Prijunkite maitinimą: Insert the power cable into the power input port on the back or side of the unit. Then, plug the other end of the power cable into a suitable electrical outlet.
1 paveikslas: Kampinis view of the Promed Nailfan Dust Extractor, showing the top grille and hand rest. This image illustrates the overall design and placement of the unit on a workstation.
Naudojimo instrukcijos
Operating the Promed Nailfan is straightforward:
- Maitinimas: Locate the power button, usually on the side or front of the unit (often a green button). Press it to turn on the dust extractor. You will hear the fan start.
- Positioning Hands: During nail filing or drilling, position the client's hand directly over the dust extraction grille. The ergonomic design with the integrated hand rest allows for comfortable and stable hand placement, ensuring optimal dust capture.
- Dulkių surinkimas: The powerful fan will draw in nail dust and debris, trapping it in the internal filter.
- Išjungti: After completing your work, press the power button again to turn off the device.
2 vaizdas: priekis view of the Promed Nailfan Dust Extractor, highlighting the "promed nailfan DUST CLEANER" logo and the green power button. This view shows the primary user interface.
Priežiūra
Regular maintenance ensures the longevity and efficiency of your Promed Nailfan:
- Filtro valymas: The filter should be cleaned regularly, depending on usage frequency.
- Unplug the device before removing the filter.
- Atsargiai išimkite filtrą iš jo angos.
- The filter can be cleaned by tapping out the dust, using a vacuum cleaner to suction off debris, or by washing it under running water.
- If washing, ensure the filter is completely dry before reinserting it into the unit. This may take up to a day. Use the spare filter provided to continue working while one filter dries.
- Išorinis valymas: Nuvalykite įrenginio išorę minkšta, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Saugykla: When not in use for extended periods, store the device in a clean, dry place.
Trikčių šalinimas
If you encounter any issues with your Promed Nailfan, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia. | Maitinimo laidas netinkamai prijungtas arba iš lizdo nėra elektros. | Check if the power cable is securely plugged into both the device and the wall outlet. Test the outlet with another appliance. |
| Sumažinta siurbimo galia. | Filter is clogged with dust. | Clean or replace the filter as described in the Maintenance section. |
| Neįprastas triukšmas veikimo metu. | Obstruction in the fan or filter not seated correctly. | Turn off and unplug the device. Check for any foreign objects near the fan or ensure the filter is properly installed. |
If the problem persists after trying these solutions, please contact Promed customer support.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | 4043641230012 |
| Prekės ženklas | Pažadėjo |
| Matmenys (I x P x A) | 23 x 22 x 10 cm |
| Svoris | 40 grams (product), 2.8 Kilograms (package) |
| Gamintojas | nd24 |
| Pagrindinės savybės | Quiet operation, powerful suction, professional device, easy to clean, dust-free workspace. |
Garantija ir palaikymas
Promed is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, Promed is known for its reliable service and availability of spare parts.
For any questions, technical assistance, or to inquire about spare parts, please contact Promed customer support through their official website or the retailer from whom you purchased the device. Please have your model number (4043641230012) ready when contacting support.
