„Cisco Catalyst 2960“ serijos komutatoriaus WS-C2960S-48TS-L naudotojo vadovas

Model: WS-C2960S-48TS-L

Įvadas

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Cisco Catalyst 2960 Series Switch, model WS-C2960S-48TS-L. Designed for optimal power efficiency and robust network performance, this switch is a key component for various network environments. Please read this manual thoroughly before operating the device.

Saugos informacija

Bendrosios saugos gairės:

Ensure proper grounding for the device.
Nenaudokite jungiklio drėgnoje arba itin drėgnoje aplinkoje.
Use only the power supply unit provided or specified by Cisco.
Refer to local electrical codes and regulations for proper installation.
Venkite užkimšti ventiliacijos angas, kad išvengtumėte perkaitimo.

Pakuotės turinys

The Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L package should contain the following items:

Cisco Catalyst 2960 Series Switch (WS-C2960S-48TS-L)
Maitinimo blokas

Note: Rack mount kits and power cables are typically included but may vary by seller or region.

Produktas baigtasview

The Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L is a high-performance network switch designed for enterprise-class access. It features 48 Gigabit Ethernet ports and supports advanced power management capabilities for efficient network operation.

Priekyje view of Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L, showing 48 RJ45 ports and indicator lights.

1 pav.: priekis view of the Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L, displaying its 48 RJ45 ports and various indicator lights.

Sąranka

1. Svetainės paruošimas

Ensure the installation site is clean, dry, and has adequate ventilation. Maintain appropriate temperature and humidity levels as per environmental specifications to ensure optimal performance and longevity of the switch.

2. Jungiklio montavimas

The switch can be mounted in a standard 19-inch equipment rack. Secure the rack-mount brackets (if provided) to the sides of the switch using the appropriate screws. Then, attach the switch to the rack using suitable rack screws, ensuring it is stable and level.

3. Maitinimo prijungimas

Connect the power cable to the power supply unit on the rear of the switch and then to a grounded AC power outlet. Verify that the power source meets the switch's voltage reikalavimai (240 voltų).

4. Pradinis tinklo ryšys

Connect your network devices (e.g., computers, servers, other switches) to the RJ45 ports on the front panel using standard Ethernet cables. The switch supports a data transfer rate of 1000 Megabits Per Second (Gigabit Ethernet) for high-speed connectivity.

Jungiklio valdymas

Įjungimas

After connecting the power cable, the switch will automatically power on. Observe the system LED indicators on the front panel for boot-up status. The system LED should turn green once the switch has successfully initialized.

Indikacinės lemputės

The front panel features various LED indicators that display the operational status of the switch and its individual ports. These LEDs provide visual feedback on link status, activity, and potential errors. Refer to the official Cisco documentation for a detailed explanation of each LED's behavior and meaning.

Pagrindinė konfigūracija

For initial configuration and management, connect a console cable to the console port (if available) and use a terminal emulation program on a computer. Alternatively, if the switch has already acquired an IP address, you may be able to access its management interface via a web browser or command-line interface (Telnet/SSH).

Priežiūra

Valymas

Periodically clean the exterior of the switch with a soft, dry, lint-free cloth. Ensure that all ventilation openings are free from dust and obstructions to maintain proper airflow. Do not use liquid cleaners or aerosol sprays directly on the switch.

Programinės aparatinės įrangos naujiniai

Regularly check the official Cisco support website for available firmware updates for your specific model. Keeping the firmware current ensures optimal performance, security, and access to new features. Always follow Cisco's official procedures for firmware upgrades to avoid potential issues.

Aplinkosaugos svarstymai

Operate the switch within its specified temperature and humidity ranges. Extreme environmental conditions can lead to device malfunction or premature failure. Ensure the operating environment is stable and within recommended limits.

Trikčių šalinimas

Nėra galios

Verify the power cable is securely connected to both the switch and a functional power outlet.
Check the power source (e.g., wall outlet, power strip) for functionality.
Ensure the power supply unit is correctly seated and connected to the switch.

Nėra tinklo ryšio

Check the link status LEDs on the connected ports. If an LED is off, verify the Ethernet cable connection at both ends.
Ensure the connected device (e.g., computer, server) is powered on and functioning correctly.
Verify that the network configuration (IP addresses, VLANs) is correct for the connected devices and the switch.

Sistemos gedimai

If the switch exhibits unusual behavior or error messages, consult the official Cisco documentation for specific error codes or LED patterns. A factory reset might be necessary as a last resort, but be aware that this will erase all custom configurations on the switch.

Specifikacijos

The following are key specifications for the Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L:

Funkcija	Detalė
Modelio numeris	WS-C2960S-48TS-L
Prekės ženklas	Cisco
Prievadų skaičius	48 (RJ45)
Duomenų perdavimo sparta	1000 megabitų per sekundę (gigabitinis eternetas)
Sąsajos tipas	RJ45
ttage	240 voltų
Prekės svoris	10.6 svaro (apie 4.81 kg)
Gaminio matmenys	17.52 x 11.77 x 1.77 colio (apytiksliai 44.5 x 29.9 x 4.5 cm)
Suderinami įrenginiai	Desktop (and other network devices)

Informacija apie garantiją

This Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L typically comes with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the documentation provided with your purchase or visit the official Cisco website. Any additional warranties offered by sellers are separate and should be verified with your point of purchase.

Pagalba klientams

For technical assistance, product documentation, or further support regarding your Cisco Catalyst 2960 Series Switch, please visit the official Cisco support website. You can find detailed contact information, knowledge bases, and resources on Cisco's Support Portal. Ensure you have your product model number (WS-C2960S-48TS-L) ready when contacting support.

	„Cisco Catalyst 2960/2960-SF/2960-S“ serijos perėjimo vadovas Vadovas, kaip pereiti nuo senesnių „Cisco Catalyst“ komutatorių modelių prie „Cisco Catalyst 2960-L“ serijos, kuriame pabrėžiamos funkcijos ir perkėlimo keliai.
	„Cisco Smart Install“ konfigūravimo vadovas Sužinokite, kaip sukonfigūruoti „Cisco Smart Install“, kad būtų galima diegti be jokių prisilietimų ir efektyviai valdyti „Cisco“ tinklo komutatorių atvaizdus / konfigūraciją. Šiame vadove aprašoma sąranka, klientų valdymas, DHCP / TFTP konfigūracija ir grupavimo strategijos.
	„Cisco Catalyst 2960-L“ serijos paprasto diegimo vadovas Žingsnis po žingsnio vadovas, kaip lengvai nustatyti „Cisco Catalyst 2960-L“ serijos komutatorių, apimantis prijungimą ir pagrindinę konfigūraciją.
	„Cisco Switch“ vadovas: išsamus aprašymasview LAN komutavimo sprendimų ir baigtaview „Cisco“ plataus LAN komutatorių portfelio, kuriame išsamiai aprašomi moduliniai, fiksuotos konfigūracijos, „blade“ ir virtualūs komutatoriai, skirti campJAV, filialų ir duomenų centrų tinklai. Išskiria mastelio keitimą, išmanumą ir pažangias funkcijas.
	„Cisco Catalyst 3560-CX“ ir „2960-CX“ serijos komutatorių išleidimo pastabos – „Cisco IOS 15.2(7)Ex“ „Cisco IOS“ programinės įrangos 15.2(7)Ex versijos, skirtos „Catalyst 3560-CX“ ir „2960-CX“ serijos komutatoriams, išleidimo pastabos, kuriose išsamiai aprašomos funkcijos, įspėjimai ir sistemos reikalavimai.
	„Cisco Catalyst 3650“ serijos komutatoriaus išleidimo pastabos: „Cisco IOS XE Denali 16.2.x“ Šiame dokumente pateikiamos „Cisco Catalyst 3650“ serijos komutatoriaus, kuriame veikia „Cisco IOS XE Denali 16.2.x“ programinė įranga, išleidimo pastabos. Joje išsamiai aprašomos naujos aparatinės ir programinės įrangos funkcijos, svarbios pastabos ir palaikomi aparatinės įrangos modeliai.

Cisco WS-C2960S-48TS-L