Įvadas
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Technoline WS 9136-IT Weather Station. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Produktas baigtasview
The Technoline WS 9136-IT is a versatile weather station designed to provide accurate indoor and outdoor temperature readings, along with weather forecasts and a radio-controlled clock. It features a clear display and user-friendly controls.
This image shows the Technoline WS 9136-IT Weather Station. The display features the current time (12:34), a DCF signal indicator, a weather forecast icon (partly cloudy), indoor temperature (23.5°C) with max/min values (25°C/18°C), and outdoor temperature (10.3°C) with max/min values (17°C/6°C). Buttons for 'SET', 'ALARM', 'MIN/MAX', and 'RESET' are visible below the display.
Pagrindinės funkcijos:
- DCF-77 Radio-Controlled Clock with manual setting option
- Vidaus ir lauko temperatūros rodymas
- Min/Max Temperature Memory
- Weather Forecast and Trend Display
- Alarm with Snooze Function
- Akumuliatoriaus įkrovimo lygio indikatorius
- Wall-Mount or Tabletop Use
- Includes Wireless Outdoor Sensor
Sąranka
1. Baterijos įdėjimas:
- Open the battery compartment on the back of the main unit and the outdoor sensor.
- Insert the required batteries (typically AA or AAA, refer to the device markings) ensuring correct polarity (+/-).
- Saugiai uždarykite akumuliatoriaus skyrelius.
2. Jutiklio išdėstymas:
- Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature readings.
- Ensure the sensor is within the effective transmission range (868 MHz) of the main unit, typically up to 30 meters in open air. Walls and obstacles may reduce this range.
3. Initial Synchronization:
- After battery installation, the main unit will automatically begin searching for the DCF-77 radio signal for time synchronization and the outdoor sensor signal.
- This process may take several minutes. Ensure the unit is placed away from potential interference sources like electronic devices.
- Once synchronized, the time and outdoor temperature will appear on the display.
Operacija
1. Laiko nustatymas:
- Automatinis: The clock automatically synchronizes with the DCF-77 signal. A signal icon will indicate successful reception.
- Rankinis: If the DCF signal is unavailable, you can manually set the time using the 'SET' button. Press and hold 'SET' to enter time setting mode, then use other buttons (e.g., 'ALARM' or 'MIN/MAX') to adjust values and 'SET' to confirm.
2. Temperatūros ekranas:
- The display shows current indoor and outdoor temperatures.
- Paspauskite mygtuką „MIN/MAX“, kad view the recorded minimum and maximum temperatures for both indoor and outdoor environments. Press again to cycle through current, minimum, and maximum values.
- To reset the Min/Max memory, press and hold the 'MIN/MAX' button while the minimum or maximum values are displayed.
3. Orų prognozė:
- The weather station predicts weather conditions for the next 12-24 hours based on atmospheric pressure changes.
- Icons such as sunny, partly cloudy, cloudy, or rainy will be displayed. Note that these are forecasts and may not always perfectly match current conditions.
4. Signalizacijos funkcija:
- Paspauskite mygtuką „ALARM“, kad view aliarmo laikas.
- Press and hold 'ALARM' to enter alarm setting mode. Use other buttons to adjust the hour and minute, and 'ALARM' to confirm.
- To activate/deactivate the alarm, press the 'ALARM' button briefly when the alarm time is displayed. An alarm icon will appear when active.
- When the alarm sounds, press any button (except 'RESET') to activate the snooze function. The alarm will sound again after approximately 5 minutes. Press 'RESET' to turn off the alarm completely.
Priežiūra
1. Baterijos keitimas:
- When the battery indicator appears on the display, replace the batteries in both the main unit and the outdoor sensor promptly.
- Visada keiskite visas baterijas vienu metu naujomis to paties tipo baterijomis.
2. Valymas:
- Įrenginį ir jutiklį valykite minkšta,amp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Ensure no water enters the battery compartments or other openings.
Trikčių šalinimas
Dažnos problemos ir sprendimai:
- No outdoor temperature display:
Sprendimas: Check batteries in the outdoor sensor. Ensure the sensor is within range and not blocked by thick walls or interference. Try re-synchronizing by removing and reinserting batteries in both units. - Time not synchronizing (DCF-77):
Sprendimas: Ensure the unit is placed in an area with good radio signal reception, away from electronic devices. The synchronization process can take several minutes, especially during initial setup or after battery replacement. Manual time setting is an alternative. - Netikslūs temperatūros rodmenys:
Sprendimas: For outdoor sensor, ensure it is not in direct sunlight or exposed to heat sources. For indoor unit, ensure it is not near windows, heating vents, or direct sunlight. - Ekranas blankus arba tuščias:
Sprendimas: Pakeiskite pagrindinio įrenginio baterijas.
Specifikacijos
- Modelio numeris: WS9136
- Matmenys (P x P x A): 12.4 x 2.9 x 13 cm
- Svoris: 158 gramų
- Maitinimo šaltinis: Maitinamas baterijomis
- Ryšio technologija: 868 MHz (for outdoor sensor)
- Medžiaga: Plastikiniai
- Spalva: Transparent/Silver
Garantija ir palaikymas
The Technoline WS 9136-IT Weather Station comes with a 2 metų garantija nuo pirkimo datos. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.
For technical support or further assistance, please refer to the manufacturer's official websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Kontaktinę informaciją paprastai galite rasti ant produkto pakuotės arba gamintojo websvetainę.