„Futaba R2104GF“ 2.4 GHz S-FHSS 4 kanalų imtuvo naudojimo instrukcija

1. Įvadas

This manual provides essential instructions for the proper installation, operation, and maintenance of the Futaba R2104GF 2.4GHz S-FHSS 4-Channel Receiver. This receiver is designed for use with the Futaba 4-PL S-FHSS four-channel surface radio system.

Please read this manual thoroughly before using the receiver to ensure safe and efficient operation.

2. Savybės

• Suderinamumas: Specifically designed for use with the Futaba 4-PL S-FHSS four-channel surface radio.
• 2.4GHz S-FHSS System: Utilizes Futaba's advanced Spread Spectrum technology for reliable communication.
• 4 kanalų veikimas: Provides four independent channels for controlling various functions.
• Aukštas tomastage Suderinamumas: Designed to operate with high voltage sistemos.
• Normal and High-Speed Modes: Supports both normal and high-speed operation modes. Normal mode frame rate is 13.63ms (FHSS/S-FHSS).

3. Pakuotės turinys

The Futaba R2104GF receiver package includes:

• One (1) Futaba R2104GF 2.4GHz S-FHSS 4-Channel Receiver
• One (1) Instruction Sheet

4. Receiver Overview

1 paveikslas: Futaba R2104GF 2.4GHz S-FHSS 4-Channel Receiver. This image displays the top view of the receiver, showing the Futaba branding, model number R2104GF, 2.4GHz S-FHSS system label, and the four channel ports (1-4), a battery port (B), a switch (SW), and an LED indicator. An antenna wire extends from the left side.

The receiver features clearly labeled ports for channels 1 through 4, a dedicated battery port (B), a binding switch (SW), and an LED indicator for status. The antenna is integrated for optimal signal reception.

5. Sąranka ir diegimas

5.1. Installation in Model

1. Montavimas: Securely mount the R2104GF receiver in your model using vibration-absorbing material (e.g., foam tape) to protect it from shocks and vibrations. Ensure it is placed away from electric motors, ESCs, and other noise-generating components.
2. Antenos vieta: Position the antenna in a location that provides maximum signal reception and is free from obstruction by metal parts. The antenna should be extended as straight as possible.

5.2. Komponentų sujungimas

1. Servai: Connect your servos to the corresponding channel ports (1-4) on the receiver. Ensure correct polarity (signal, positive, negative).
2. Battery/ESC: Connect the battery or Electronic Speed Controller (ESC) to the 'B' (Battery) port. If using an ESC with a built-in BEC (Battery Eliminator Circuit), connect the ESC to channel 2 (throttle) and the BEC will power the receiver. If using a separate receiver battery, connect it to the 'B' port.

5.3. Linking to Transmitter (Binding)

The R2104GF receiver must be linked (bound) to your Futaba 4-PL S-FHSS transmitter before use. Follow these steps:

1. Turn on your Futaba 4-PL S-FHSS transmitter and ensure it is in S-FHSS mode.
2. Connect the battery to the receiver. The LED on the receiver will begin to flash.
3. Press and hold the 'SW' (Switch) button on the receiver for approximately one second. The LED will change from flashing to solid green, indicating successful linking.
4. Atleiskite mygtuką „SW“.
5. Išjunkite imtuvą, tada išjunkite siųstuvą.
6. Pirmiausia įjunkite siųstuvą, tada imtuvą. Imtuvo šviesos diodas turėtų iš karto užsidegti žaliai, patvirtindamas ryšį.
7. Test all control surfaces and functions to ensure proper operation before actual use.

Pastaba: If the LED does not turn solid green, repeat the linking process. Ensure the transmitter and receiver are within close proximity during the linking procedure.

6. Veikimo režimai

The R2104GF receiver supports two operating modes:

• Įprastas režimas: This is the standard operating mode. The frame rate for FHSS/S-FHSS is 13.63ms. This mode is suitable for most applications and standard servos.
• Didelio greičio režimas: This mode offers a faster response time. It is typically used with digital servos that can handle higher frame rates. Refer to your transmitter's manual for instructions on how to select High-Speed mode. Ensure all connected servos are compatible with high-speed operation before activating this mode.

7. Priežiūra

• Valymas: Imtuvą laikykite švarų, be dulkių, nešvarumų ir drėgmės. Valymui naudokite minkštą, sausą šluostę. Venkite tirpiklių ar stiprių cheminių medžiagų.
• Patikra: Regularly inspect all connections (servo, battery) for secure fit and signs of wear or damage. Check the antenna for any kinks or cuts.
• Saugykla: Store the receiver in a dry, cool environment away from direct sunlight and extreme temperatures when not in use.

8. Problemų sprendimas

If you encounter issues with your R2104GF receiver, consider the following:

• Nėra maitinimo / šviesos diodas išjungtas:
  • Check battery connection and ensure the battery is charged.
  • Verify correct polarity of battery connection.
• No Link/LED Flashing:
  • Ensure the transmitter is powered on and in S-FHSS mode.
  • Repeat the linking procedure (Section 5.3).
  • Confirm the transmitter and receiver are within close range during linking.
  • Patikrinkite, ar nėra trukdžių iš kitų 2.4 GHz įrenginių.
• Intermittent Control/Loss of Signal:
  • Check antenna placement; ensure it is not obstructed or damaged.
  • Verify that the receiver is securely mounted and free from excessive vibration.
  • Įsitikinkite, kad siųstuvo baterija yra tinkamai įkrauta.
  • Venkite naudoti vietose, kuriose yra dideli 2.4 GHz dažnio trukdžiai.
• Servo nereaguoja:
  • Check servo connections for correct port and polarity.
  • Ensure servos are not mechanically bound or damaged.
  • Verify that the transmitter is sending correct commands.

If problems persist, consult the Futaba 4-PL S-FHSS transmitter manual or contact Futaba customer support.

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation provided with your Futaba 4-PL S-FHSS radio system or visit the official Futaba websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantiniams reikalavimams.

Gamintojas: Hobbico Inc