Nešiojamojo DLP projektoriaus „InFocus IN112“ naudotojo vadovas

1. Įvadas

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Kas yra dėžutėje

Patikrinkite, ar jūsų gaminio pakuotėje yra visi toliau išvardyti daiktai:

• InFocus IN112 Projector
• Maitinimo laidas
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Saugos instrukcijos
• Vartotojo vadovas (šis dokumentas)
• Nuotolinio valdymo pultas

3. Projektorius baigtasview

1 paveikslas: viršuje View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

2 pav.: šonas View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

3 pav.: Kampinis View su „Remote“ - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

4 pav.: galinis View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Sąranka

4.1 Įdėjimas

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Maitinimo jungtis

1. Connect the supplied power cord to the projector's power inlet.
2. Kitą maitinimo laido galą įkiškite į įžemintą elektros lizdą.

4.3 Įvesties šaltinių prijungimas

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Sudėtinis vaizdo įrašas: Use the A/V cable to connect to devices with composite video output.
• „S-Video“: Connect to devices with S-Video output.
• Garso įvestis: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Prieš įjungdami projektorių, įsitikinkite, kad visi laidai yra tvirtai prijungti.

5. Naudojimo instrukcijos

5.1 Maitinimo įjungimas/išjungimas

• Norėdami įjungti, paspauskite Galia button on the control panel or remote control. The power indicator light will illuminate.
• Norėdami išjungti, paspauskite Galia button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Vaizdo koregavimas

• Fokusas: Sukite projektoriaus objektyvo fokusavimo žiedą, kol vaizdas taps ryškus ir aiškus.
• Pagrindinis akmuo: Naudokite Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Šaltinio pasirinkimas

Paspauskite Šaltinis button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Meniu naršymas

Paspauskite Meniu/Išeiti mygtuką, kad pasiektumėte ekrano meniu (OSD). Norėdami naršyti, naudokite rodyklių mygtukus ir Pasirinkite or Įeikite mygtuką, kad patvirtintumėte pasirinkimus. Paspauskite Meniu/Išeiti dar kartą, kad uždarytumėte meniu.

5.5 Ekologinis režimas

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Priežiūra

6.1 Lamp Pakeitimas

Projektorius lamp turi ribotą gyvavimo trukmę. Kai lamp indikatorius (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Atsargiai: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Valymas

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Problemų sprendimas

8. Specifikacijos

9. Garantija ir palaikymas

9.1 Gaminio garantija

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5 metų ribota garantija projektoriuje.
• 2 metų pilna garantija apimančias dalis ir darbą.
• 6 mėnesių garantija ant lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus websvetainę.

9.2 Techninė pagalba

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official websvetainėje arba pridedamoje dokumentacijoje.

10. Related Product Information (IN130 Series)

Toliau pateiktame vaizdo įraše pateikiama apžvalgaview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.