1. Produktas baigtasview
The ACE DA-7100 is a digital breathalyzer designed for personal alcohol concentration measurement. It utilizes an advanced electrochemical sensor to provide accurate and rapid results. The device features a clear digital display for easy reading of measurements and is operated with a single button.

Image 1: The ACE DA-7100 Breathalyzer, showing its compact design, digital display, power button, and attached mouthpiece. The display currently reads "0.00".
Pagrindinės funkcijos:
- Electrochemical sensor for precise alcohol detection.
- Vieno mygtuko valdymas patogiam naudojimui.
- Rapid measurement and analysis of breath samples.
- Clear digital display for easy reading of results.
2. Saugos informacija ir svarbios pastabos
Disclaimer: This device is intended for personal use as a guide only. It should not be used to determine whether a person is fit to drive or operate machinery. Legal alcohol limits vary by jurisdiction, and this device does not guarantee compliance with local laws. Always adhere to local regulations regarding alcohol consumption and driving.
- Palaukite 20 minutes: For accurate results, wait at least 20 minutes after consuming alcohol, eating, or smoking before performing a test. Residual alcohol in the mouth can lead to inaccurate readings.
- Temperatūros diapazonas: Operate the device within a temperature range of 0°C to 40°C (32°F to 104°F). Using it outside this range may affect accuracy or cause an "Out C" error.
- Between Tests: If a high alcohol concentration (e.g., 1.00‰ or higher) is detected, wait at least 5 minutes before conducting another test to allow the sensor to clear.
- Išvengti poveikių: Protect the device from strong impacts or drops, as this can damage the internal components and affect accuracy.
- Aplinkos veiksniai: Do not use the device in environments saturated with smoke or strong fumes, as this can interfere with the sensor.
3. Pakuotės turinys
Prašome patikrinti pakuotę, kad įsitikintumėte, jog yra visi reikalingi daiktai:
- ACE DA-7100 Digital Breathalyzer
- 2 x AAA 1.5V Alkaline Batteries
- 6 x Sealed Mouthpieces
- Carrying Case (Nylon, black, with zipper)
- Wrist Strap (Grey)
- Multi-language Instruction Manual
4. Sąranka
4.1. Akumuliatoriaus įdėjimas
- Suraskite akumuliatoriaus skyrių įrenginio gale.
- Atidarykite akumuliatoriaus skyriaus dangtelį.
- Insert two AAA 1.5V alkaline batteries, ensuring correct polarity (+/-).
- Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.
4.2. Mouthpiece Attachment
- Take one of the sealed mouthpieces from the package.
- Firmly insert the mouthpiece into the designated port on the side of the breathalyzer.
- Ensure the mouthpiece is securely attached to prevent air leakage during testing.
5. Naudojimo instrukcijos
Follow these steps to perform an alcohol concentration test:
- Maitinimas: Press the ON button located on the front of the device, below the display.
- Apšilimas: The device will begin a countdown. This is the warm-up phase for the sensor.
- Prepare to Blow: Once the countdown reaches zero, you will hear two beeps, and the display will show three lines followed by the word "START" flashing. This indicates the device is ready for a breath sample.
- Provide Breath SampLe: Take a deep breath. Then, blow continuously and steadily into the mouthpiece for approximately 5 seconds. Moving lines may appear on the display during this process.
- Skaityti rezultatus: After a few seconds, the estimated Blood Alcohol Concentration (BAC) value will be displayed. The result will flash for a short period.
- Automatinis išsijungimas: The device will automatically power off after displaying the result to conserve battery life.
6. Priežiūra
6.1. Mouthpiece Care
- For hygiene, it is recommended to use a new mouthpiece for each test, especially when multiple users are involved.
- Mouthpieces can be cleaned and reused by soaking them in a disinfectant solution (e.g., Amuchina) for about 15 minutes, then rinsing thoroughly and air-drying.
6.2. Baterijos keitimas
When the "BAt" message appears on the display, the batteries are low and should be replaced immediately with new AAA 1.5V alkaline batteries to ensure accurate readings.
6.3. Kalibravimas
To maintain the high precision of the ACE DA-7100, it is recommended to send the device for professional calibration. This should ideally be done:
- After a maximum of 12 months from the first use.
- After approximately 500 measurements.
Regular calibration ensures the device continues to provide reliable results, as precision may decrease over time with use.
6.4. Sandėliavimas
Store the breathalyzer in its provided carrying case in a dry place, away from direct sunlight and extreme temperatures. Avoid storing it in environments below 0°C or above 40°C.
7. Problemų sprendimas
| Problemos / klaidos pranešimas | Galima priežastis | Sprendimas |
|---|---|---|
| "Flo" on display | Insufficient or irregular breath sample. | Ensure you take a deep breath and blow continuously and steadily into the mouthpiece for the full 5 seconds when "START" is flashing. |
| "Out C" on display | Operating temperature is outside the recommended range (0°C - 40°C). | Move the device to an environment within the specified temperature range and allow it to acclimate before retesting. |
| "BAt" on display | Maža akumuliatoriaus energija. | Replace both AAA batteries with new 1.5V alkaline batteries immediately. |
| Netikslūs arba nenuoseklūs rodmenys |
|
|
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | DA-7100 |
| Jutiklio tipas | Elektrocheminis |
| Matmenys (I x P x A) | 12 x 4.8 x 2 cm (apytiksliai) |
| Svoris | 93 g (su baterijomis) |
| Maitinimo šaltinis | 2 x AAA 1.5 V baterijos (pridedamos) |
| Darbinė temperatūra | nuo 0°C iki 40°C (32°F iki 104°F) |
| Matavimo tikslumas | 0.05‰ with 1.00‰ BAC at 25°C (as per manufacturer's stated margin of error) |
9. Garantija ir palaikymas
For specific warranty information, please refer to the documentation provided with your purchase or contact ACE customer support directly. Regular calibration is crucial for maintaining the device's accuracy and is recommended annually or after 500 tests.
For technical assistance, calibration services, or inquiries, please visit the official ACE websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Kontaktiniai duomenys paprastai pateikiami ant produkto pakuotės arba gamintojo websvetainę.
You can find more information about ACE products and support at the ACE Brand Store.