1. Įvadas
The BWT Best Max Premium M Water Filter Installation Kit with Filter Head is designed to optimize water quality for various applications, particularly for coffee machines and vending devices. This system ensures consistently high-quality, particle-free water, enhancing the taste of beverages and protecting your equipment from scale buildup.
The universal filter head is compatible with all BWT water filter cartridges and features an automatic shut-off valve for easy and safe filter changes. It can be installed both horizontally and vertically.
Figure 1: BWT Best Max Premium M Water Filter and Universal Filter Head. This image shows the complete kit, including the white filter cartridge with a yellow cap and the blue universal filter head.
2. Saugos informacija
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- Slėgis: Ensure the input pressure is within the specified range of 2 – 8 bar. Do not exceed maximum operating pressure.
- Temperatūra: The water temperature should be between 4 – 30 °C. The ambient temperature should be between 4 – 40 °C. Do not expose the unit to freezing temperatures.
- Montavimas: Installation should only be performed by qualified personnel in accordance with local plumbing codes and regulations.
- Priežiūra: Always shut off the water supply and relieve pressure before performing any maintenance or filter changes.
- Šalinimas: Panaudotus filtro kasetes išmeskite pagal vietinius aplinkosaugos reikalavimus.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi komponentai:
- 1 x BWT Best Max Premium M Filter Cartridge (approx. 3800 litres capacity at 10 °dKH/blend 3)
- 1 x Universal Filter Head with backflow preventer and bypass adjustment
- 1 x tvirtinimo prie sienos laikiklis
- Connection fittings (e.g., AG3/8')
4. Sąranka ir diegimas
Follow these steps for proper installation of your BWT water filter system:
- Pasirinkite vietą: Select a suitable location for installation, ensuring easy access for filter changes and maintenance. The filter head can be mounted horizontally or vertically.
- Mount Filter Head: Use the provided wall mounting bracket to securely attach the universal filter head to a stable surface.
- Prijunkite vandens tiekimą: Connect the water inlet to the filter head's inlet port (marked with an arrow indicating flow direction). Ensure all connections are tight to prevent leaks. The connection thread is 3/8 inch.
- Prijunkite prie prietaiso: Connect the filter head's outlet port to your coffee machine or vending device.
- Įdėkite filtro kasetę: Align the BWT Best Max Premium M filter cartridge with the filter head and insert it by twisting until it locks securely into place. The automatic shut-off valve will engage.
- Adjust Bypass Setting: The filter head features a bypass adjustment. Consult your appliance's requirements or local water hardness for the optimal blend setting. This setting determines the proportion of filtered water to bypass water.
- Skalavimo sistema: Slowly open the water supply. Flush the system with water for a few minutes (e.g., 1-2 liters) to remove any air and fine particles from the new filter. This initial flush is important for optimal performance.
- Patikrinkite, ar nėra nuotėkių: Atidžiai patikrinkite visas jungtis, ar nėra nuotėkio požymių.
2 pav. Iš arti view of the BWT Universal Filter Head. This image highlights the connection points and the bypass adjustment dial on the filter head.
5. Naudojimo instrukcijos
Once installed, the BWT Best Max Premium M filter system operates automatically. Water flows through the filter, undergoing optimization before reaching your appliance.
- Nuolatinis filtravimas: The system continuously filters water as it passes through, providing optimized water for your connected device.
- Bypass Setting: The bypass setting on the filter head allows you to fine-tune the water's mineral content to suit specific beverage requirements or local water conditions. Refer to the bypass adjustment guide for recommended settings based on water hardness.
6. Priežiūra
6.1. Filtro kasetės keitimas
The filter cartridge has a capacity of approximately 3800 litres (at 10 °dKH/blend 3) or should be replaced at least every 12 months, whichever comes first, to ensure optimal water quality and system performance.
- Išjunkite vandenį: Išjunkite pagrindinį vandens tiekimą į filtro sistemą.
- Atleiskite slėgį: Briefly open a tap connected to the system to relieve any residual pressure.
- Išimkite seną kasetę: Twist the used filter cartridge counter-clockwise to unlock it from the filter head. The automatic shut-off valve will prevent water leakage.
- Įdėkite naują kasetę: Remove the protective cap from the new BWT Best Max Premium M filter cartridge. Align it with the filter head and insert it by twisting clockwise until it clicks securely into place.
- Flush New Cartridge: Slowly open the water supply. Flush the new filter cartridge with water for a few minutes (e.g., 1-2 liters) to remove any air and fine particles.
- Patikrinkite, ar nėra nuotėkių: Verify that there are no leaks around the new cartridge.
- Reset Reminder: If your appliance has a filter change reminder, reset it according to its instructions.
Figure 3: BWT Best Max Premium M Water Filter Cartridge. This image shows the standalone filter cartridge, which is replaced during maintenance.
6.2. Valymas
The exterior of the filter head and cartridge can be wiped clean with a damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Vandens nutekėjimas | Loose connections; improperly seated filter cartridge; damaged O-rings. | Tighten all connections. Ensure filter cartridge is fully twisted and locked. Inspect O-rings for damage and replace if necessary. |
| Sumažintas vandens srautas | Clogged filter cartridge; low incoming water pressure; air in the system. | Replace filter cartridge if it has reached its capacity or is overdue for replacement. Check household water pressure. Flush the system to remove air. |
| Poor Water Taste/Quality | Expired filter cartridge; incorrect bypass setting. | Replace filter cartridge. Adjust bypass setting to optimize filtration for your water hardness. |
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | cvbbbg-1134 |
| Ryšio gija | 3/8 colio |
| Įvesties slėgis | 2-8 barai |
| Vandens temperatūra | 4 – 30 °C |
| Aplinkos temperatūra | 4 – 40 °C |
| Total Height (without ironing) | Approx. 475 mm (18.7 inches) |
| Total Height (with ironing) | Approx. 500 mm (19.7 inches) |
| Connection Height | 425 mm (16.7 coliai) |
| Distance Ground Level | 65 mm (2.5 coliai) |
| Montavimo ilgis | 125 mm (4.9 coliai) |
| Filter Cartridge Diameter | 130 mm (5.1 coliai) |
| Svoris (sausas / šlapias) | Approx. 2.4 kg / 4.2 kg (5.3 lbs / 9.3 lbs) |
| Filtro talpa | Approx. 3800 litres (at 10 °dKH/blend 3) |
9. Garantija ir palaikymas
Specific warranty information for this product is not provided in the available documentation. For details regarding warranty coverage, please refer to the official BWT website or contact BWT customer support directly.
For technical support, replacement parts, or further inquiries, please contact BWT customer service through their official channels. Always provide your product model number (cvbbbg-1134) when seeking support.
Pastaba dėl vaizdo įrašų: Pateiktuose duomenyse nebuvo jokių oficialių pardavėjo produktų vaizdo įrašų, kuriuos būtų galima įterpti į šį vadovą.
