1. Įvadas
This manual provides instructions for the installation, operation, and maintenance of the ICM Controls Fixed 60 Degrees F Thermostat. This low voltage thermostat is designed for use with 2-wire HVAC systems to maintain a fixed temperature of 60 degrees Fahrenheit.
The ICM Controls Fixed 60 Degrees F Thermostat is a non-programmable device intended for applications where a constant temperature setting is required, such as in unoccupied spaces or for freeze protection.
2. Saugos informacija
ĮSPĖJIMAS: Elektros smūgio pavojus
- Always disconnect power to the HVAC system at the main service panel before installing or servicing this thermostat. Failure to do so can result in electrical shock, property damage, or death.
- Montavimą turi atlikti kvalifikuotas technikas.
- Įsitikinkite, kad visi laidų sujungimai yra tvirti ir atitinka vietinius elektros kodeksus.
Prieš pradėdami montavimą ar eksploatavimą, atidžiai perskaitykite visas instrukcijas.
3. Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- ICM Controls Fixed 60 Degrees F Thermostat
- Integrated 6-inch wire leads
4. Diegimas ir sąranka
4.1 Montavimo vieta
Pasirinkite montavimo vietą, kuri yra:
- On an interior wall, approximately 5 feet (1.5 meters) above the floor.
- Away from direct sunlight, drafts, or heat sources (e.g., lamps, appliances, fireplaces).
- Away from areas with poor air circulation.
4.2 Laidų prijungimo instrukcijos
- Atjunkite maitinimą: Turn off power to the HVAC system at the circuit breaker or fuse box.
- Identifikuokite laidus: This thermostat is designed for 2-wire low voltage HVAC systems (18VAC to 30VAC). Typically, these systems use R (power) and W (heat call) wires. Consult your HVAC system's manual if unsure.
- Prijunkite termostatą: Connect the two wire leads from the ICM Controls thermostat to the corresponding R and W terminals of your HVAC system's control wiring. Ensure connections are secure.
- Termostato montavimas: Secure the thermostat to the wall using appropriate fasteners. This unit is designed for surface mounting.
- Atkurti maitinimą: Kai laidai bus baigti ir pritvirtinti, atkurkite ŠVOK sistemos maitinimą.
The thermostat will immediately begin sensing the ambient temperature and control the heating system to maintain 60 degrees F.
5. Operacija
The ICM Controls Fixed 60 Degrees F Thermostat is a non-adjustable, single-setpoint device. It is designed to activate your heating system when the ambient temperature falls below 60 degrees Fahrenheit and deactivate it when the temperature reaches or exceeds 60 degrees Fahrenheit.
There are no user-adjustable settings, buttons, or displays on this thermostat. Its operation is fully automatic once correctly installed and powered.
6. Priežiūra
This thermostat requires minimal maintenance. Follow these guidelines:
- Valymas: Periodically wipe the exterior of the thermostat with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Oro srautas: Ensure that the thermostat is not obstructed by furniture, curtains, or other objects that could impede proper air circulation around the sensor.
- Metinis patikrinimas: It is recommended to have your HVAC system and thermostat checked annually by a qualified technician to ensure optimal performance.
7. Problemų sprendimas
If your heating system is not operating as expected, consider the following:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šildymo sistema neįsijungia. | No power to the thermostat or HVAC system. | Check circuit breaker/fuse. Ensure power is restored. |
| Neteisingas laidų sujungimas. | Verify wiring connections (R and W) are secure and correct. Refer to Section 4.2. | |
| Ambient temperature is above 60°F. | The thermostat will only activate heating when the temperature drops below 60°F. This is normal operation. | |
| Heating system running constantly. | Ambient temperature is consistently below 60°F. | This is normal operation if the space requires continuous heating to maintain 60°F. |
| Termostato gedimas. | If the temperature is above 60°F and the heating system is still running, disconnect power and contact a qualified technician or ICM Controls support. |
For issues not listed here, or if troubleshooting steps do not resolve the problem, contact ICM Controls customer support.
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | ICM valdikliai |
| Modelio numeris | 7431990920987 |
| Valdymo diapazonas | Fixed 60 Degrees F |
| ttage | Nuo 18 VAC iki 30 VAC |
| Sistemos perjungimas | Nr |
| Fan Switching | Nr |
| Automatinis perjungimas | Nr |
| Dual Transformer Compatible | Nr |
| Galios metodas | Laidinis |
| 750mV Compatible | Nr |
| Montavimo tipas | Paviršinis montavimas |
| Matmenys (aukštis x plotis x gylis) | 2 In. x 3/8 In. x 3/8 In. (Approximate, based on description) |
| Įtraukti komponentai | 6" Wire Leads |
| Prekės svoris | 16 uncijų (1 svaras) |
9. Garantija ir palaikymas
For warranty information, please refer to the documentation provided with your purchase or visit the official ICM Controls website. ICM Controls products are designed for reliability and performance.
If you require technical assistance or have questions regarding your ICM Controls Fixed 60 Degrees F Thermostat, please contact ICM Controls customer support through their official channels. Have your model number (7431990920987) ready when contacting support.
ICM valdikliai Websvetainė: www.icmcontrols.com
