Eaton TR7740W-K Combination USB Charger Receptacle User Manual

1. Produktas baigtasview

The Eaton TR7740W-K is a combination USB charger and tamper-resistant AC receptacle designed for convenient charging of electronic devices and safe power access. This device integrates two USB charging ports and a standard 125V AC outlet into a single unit, eliminating the need for bulky adapters.

Pagrindinės funkcijos:

• Dual USB ports for charging most electronic devices.
• Energy-efficient design compared to traditional plug-in adapters.
• LED indicator light to show charging status; turns off upon full charge.
• 15A 125V tamper-resistant AC receptacle, compliant with 2011 NEC Article 406.12 for child safety.
• UL approved tamper-resistant shutters prevent insertion of foreign objects.
• Backwire clamps on side terminals for easy installation with #12 and #14 AWG wire.
• Designed to replace existing standard duplex receptacles.

2. Saugos informacija

ĮSPĖJIMAS: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with national and local electrical codes.

• Prieš montuodami ar atlikdami techninę priežiūrą, visada atjunkite maitinimą.
• Use only with copper wire. Do not use with aluminum wire.
• Įsitikinkite, kad visos laidų jungtys yra saugios.
• Šis prietaisas skirtas naudoti tik patalpose.
• Neviršykite maksimalių prietaiso elektros vardinių verčių.
• Jei nesate tikri dėl šių instrukcijų, kreipkitės į kvalifikuotą elektriką.

65 pasiūlymo įspėjimas: Šiame produkte gali būti cheminių medžiagų, kurios, kaip žinoma Kalifornijos valstijoje, sukelia vėžį, apsigimimus ar kitokią reprodukcinę žalą.

3. Pakuotės turinys

• Eaton TR7740W-K Combination USB Charger Receptacle (White)
• (3) Pre-stripped 6-inch wire leads
• Montavimo detalės (varžtai)

4. Sąranka ir diegimas

Installation should be performed by a qualified individual. Follow these steps carefully:

1. Išjungti maitinimą: Locate the circuit breaker or fuse box controlling the outlet where you intend to install the receptacle. Turn off the power to that circuit. Verify power is off using a voltage testeris.
2. Pašalinkite seną talpyklą: Unscrew and carefully pull the existing receptacle from the wall box. Disconnect the wires from the old receptacle. Note the wire connections: typically, black (hot), white (neutral), and bare copper or green (ground).
3. Paruoškite laidus: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The TR7740W-K includes pre-stripped wire leads for convenience.
4. Laidų jungtys:
   • Prijunkite žalias arba plikas varinis įžeminimo laidas from the wall box to the green ground screw on the new receptacle.
   • Prijunkite baltas (neutralus) laidas from the wall box to the silver screw terminal or the white pre-stripped wire lead on the new receptacle.
   • Prijunkite juoda (karšta) viela from the wall box to the brass screw terminal or the black pre-stripped wire lead on the new receptacle.
   • For backwire clamps, insert the stripped wire end fully into the clamp opening and tighten the screw firmly.
5. Laikymo lizdas: Carefully push the wired receptacle back into the wall box. Secure it with the mounting screws provided.
6. Sieninės plokštės montavimas: Attach the decorative wallplate (not included) over the receptacle.
7. Atkurti maitinimą: Įjunkite maitinimą grandinės pertraukikliu arba saugiklių dėžute.

1 vaizdas: priekis view of the Eaton TR7740W-K, highlighting the USB ports and AC outlet.

2 paveikslėlis: Šonas view of the Eaton TR7740W-K, illustrating the wiring terminals for installation.

5. Naudojimo instrukcijos

Using your Eaton TR7740W-K combination receptacle is straightforward:

• USB įkrovimas: Insert your device's USB charging cable into one of the two USB ports. The LED indicator light will glow to confirm that the device is charging. The light will turn off when the device reaches a full charge.
• Kintamosios srovės maitinimas: Plug any standard 125V AC appliance or charger into the tamper-resistant AC outlet. The tamper-resistant shutters require simultaneous pressure on both slots to open, preventing single-object insertion for enhanced safety.

The USB ports provide a total output of 0.7A (700mA) at 5V DC. While suitable for most smartphones and smaller electronic devices, some high-current devices like certain tablets (e.g., older iPads) may charge slower or not at full speed due to their higher power requirements.

6. Priežiūra

The Eaton TR7740W-K requires minimal maintenance:

• Valymas: Prieš valydami atjunkite maitinimą. Nuvalykite paviršių minkšta,amp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Patikra: Periodically inspect the receptacle for any signs of damage, loose connections, or discoloration. If any issues are found, turn off power and consult a qualified electrician for repair or replacement.

7. Problemų sprendimas

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the official Eaton website or contact Eaton customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

„Eaton“ klientų aptarnavimo tarnyba: Prašome apsilankyti www.eaton.com for contact details and further product information.