1. Įvadas
The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.
Pagrindinės funkcijos:
- Plačiajuostis ryšys ampsušvelninimas.
- Incorporates switched-mode power supplies.
- Allows mixing of MATV signals via an independent input.
- Kompaktiški matmenys: 180 x 110 x 55 mm.
- High-shielding chassis, manufactured from Zamak.
- Atskirai amplification with very low noise figure, preserving signal quality.
- Ultra-reduced ergonomic design.
1 pav.: galinis view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.
2. Saugos informacija
Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Maitinimas: Ensure the device is connected to a power outlet with the correct voltage and frequency as specified in the technical specifications.
- Vėdinimas: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
- Drėgmė: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp aplinkos.
- Valymas: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
- Aptarnavimas: Nemėginkite patys aptarnauti šio gaminio. Visą techninę priežiūrą patikėkite kvalifikuotam aptarnavimo personalui.
- Montavimas: Ensure the device is securely mounted on a stable surface to prevent it from falling.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- Televes 5363 Multiband Ampgyvybingesnis
- Power cable (integrated or separate, depending on model variant)
- Instrukcijų vadovas (šis dokumentas)
- Tvirtinimo priedai (varžtai, sieniniai kaiščiai)
4. Sąranka ir diegimas
The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:
4.1. Montavimas Ampgyvybingesnis
- Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
- Mark the positions for the mounting screws on the wall or surface.
- Jei reikia, išgręžkite kreipiamąsias skyles ir įkiškite sieninius kaiščius.
- Apsaugokite ampfiksatorių naudodami tinkamus varžtus.
4.2. Connecting Signals
The amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.
Figure 2: Detail of the input connections and configuration switches on the Televes 5363 ampgyvesnis.
- VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
- SAT įvestis: Connect your satellite dish signal cable to the designated SAT input.
- Išvestis: Prijunkite išvestį amplifier to your SMATV distribution network or directly to your television/receiver.
4.3. Maitinimo prijungimas
Prijunkite maitinimo kabelį prie amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.
3 pav.: priekis view of the Televes 5363 Multiband Amplifier, showing the power input.
5. Operacija
The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.
5.1. Signal Mixing
The amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.
5.2. Stiprinimo koregavimas
The amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.
6. Priežiūra
To ensure optimal performance and longevity of your Televes 5363 Multiband Amp„lifier“, laikykitės šių paprastų priežiūros nurodymų:
- Valymas: Periodiškai valykite išorę ampminkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Vėdinimas: Įsitikinkite, kad ventiliacijos angos nėra dulkės ir neužsikimšusios, kad išvengtumėte perkaitimo.
- Jungtys: Retkarčiais patikrinkite visas kabelių jungtis, kad įsitikintumėte, jog jos tvirtos ir be korozijos.
- Aplinka: Laikykite amplifier in a dry, cool environment, away from direct sunlight and extreme temperatures.
7. Problemų sprendimas
If you encounter issues with your Televes 5363 Multiband Amplifier, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:
- Nėra signalo:
- Check all cable connections to ensure they are properly seated.
- Patikrinkite, ar amplifier is receiving power (check power indicator light if available).
- Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
- Weak or Poor Quality Signal:
- Check the quality of the input signals before they reach the ampgyvesnis.
- Ensure all connections are tight and free from damage or corrosion.
- Patikrinkite, ar amplifier's gain settings (if adjustable) are appropriate for your installation.
- Nėra galios:
- Check the power cable connection to both the amplifier and the electrical outlet.
- Patikrinkite elektros lizdą su kitu prietaisu, kad įsitikintumėte, jog jis veikia.
If the problem persists after attempting these solutions, contact qualified technical support.
8. Techninės specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | 5363 |
| Gamintojas | Televes |
| Medžiaga | Zamakas |
| Įėjimų skaičius | 2 (VHF/UHF, SAT) |
| Output Level (Vs) | 124 dBuV |
| Gain (SAT) | 45 dB |
| Dažnių diapazonas | Up to 2150 MHz (FI) |
| Montavimo tipas | Paviršinis montavimas |
| Matmenys (I x P x A) | 180 x 110 x 55 mm |
| Produkto svoris | 950 g |
| Maitinimo šaltinis | Switched-mode power supply (internal) |
| Reikalingos baterijos | Nr |
9. Garantija ir palaikymas
This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes websvetainę.
For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes websvetainę.
