Eiko H1155 H11 Series Halogen Replacement Bulb Instruction Manual

Įvadas

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

Saugos informacija

• ĮSPĖJIMAS: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
• ATSARGIAI: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before handling.
• ATSARGIAI: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
• ĮSPĖJIMAS: Senas lemputes utilizuokite atsakingai, laikydamiesi vietinių taisyklių.

Produktas baigtasview

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

1 paveikslas: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

Sąranka ir diegimas

1. Paruošimas: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
2. Prieiga prie lemputės: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
3. Atjunkite laidus: Atsargiai atjunkite elektros jungtį nuo senos lemputės galo.
4. Pašalinti seną lemputę: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
5. Įdiekite naują lemputę: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
6. Prijunkite laidus iš naujo: Prijunkite elektros jungtį prie naujos lemputės.
7. Bandymo funkcionalumas: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
8. Surinkti iš naujo: Vėl uždėkite visus dangtelius ar komponentus, kurie buvo nuimti, kad būtų galima pasiekti lemputę.

Pastaba: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

Operacija

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

Priežiūra

• Valymas: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
• Patikra: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
• Tvarkymas: When replacing bulbs, always handle them by the base to avoid contaminating the glass.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official websvetainėje arba susisiekite tiesiogiai su „Eiko“ klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Manufacturer: EIkO Auto Lighting