Clear-Com RM-702 2-Channel Intercom Remote Station User Manual

Įvadas

The Clear-Com RM-702 is a single rack-space, two-channel remote station designed for professional intercom systems. This unit is powered directly by the intercom line, providing a streamlined setup. Operators can communicate on either or both channels, facilitating flexible communication workflows. The RM-702 includes a line-level audio program input via a DB-15 connector, with both channels supporting program interrupt (IFB). Key features such as microphone limiting and a speaker 'dipping' circuit are integrated to enhance audio output clarity and minimize feedback.

1 paveikslas: Priekyje view of the Clear-Com RM-702 remote station, showing the rack-mount design and primary controls.

Sąranka

Follow these steps to properly set up your Clear-Com RM-702 remote station:

1. Stovo montavimas: Install the RM-702 into a standard 1RU rack space. Secure the unit using appropriate rack screws.
2. Intercom Line Connection: Connect the intercom line from your Clear-Com system to the designated XLR connectors on the rear panel. The unit draws power directly from the intercom line.
3. Ausinių prijungimas: Plug your headset into the 4-pin or 5-pin XLR headset connector on the front panel. Ensure the connection is secure.
4. Program Audio Input: If using program audio with IFB, connect your line-level audio source to the DB-15 connector on the rear panel. Refer to your system's wiring diagram for correct pin assignments.
5. Speaker Connection (Optional): If an external speaker is desired, connect it to the appropriate output. The internal speaker is active by default.

2 paveikslas: Rear panel of the Clear-Com RM-702, showing Intercom Channel A and B XLR connectors, Accessory port, and Hot Mic/C-C IFB System controls.

Operacija

The RM-702 offers intuitive controls for effective communication:

• Kanalo pasirinkimas: Use the dedicated buttons to select communication on Channel A, Channel B, or both simultaneously. The unit supports selectable one- or two-channel communication.
• Talk/Listen Functions: Press the 'Talk' button for the desired channel to speak. The 'Listen' function is typically always active for selected channels.
• LED Buttons: The front panel features LED-illuminated buttons for various functions including 'Talk', 'Call', 'Announce', 'Link', 'All Talk', and 'Mic On'. These indicators provide visual feedback on the station's status.
• Ausinių naudojimas: Adjust your headset's microphone and earpiece for comfortable and clear communication. The unit's microphone limiting circuit helps prevent audio distortion.
• Garsiakalbio naudojimas: The integrated wide-range, high-output speaker allows for hands-free listening. The speaker 'dipping' circuit automatically reduces speaker volume when the microphone is active to prevent feedback.
• Program Interrupt (IFB): When program audio is connected, the IFB function allows the operator to interrupt the program feed to deliver cues or instructions to talent.

Priežiūra

To ensure the longevity and optimal performance of your Clear-Com RM-702, follow these simple maintenance guidelines:

• Valymas: Regularly wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with a mild, non-abrasive cleaner can be used. Ensure no liquid enters the unit.
• Vėdinimas: Ensure that the ventilation slots are not obstructed to prevent overheating. Maintain adequate airflow around the unit, especially when rack-mounted.
• Aplinkos sąlygos: Operate and store the unit in a clean, dry environment, away from extreme temperatures, humidity, and direct sunlight.
• Kabelio apžiūra: Periodically inspect all connected cables for signs of wear or damage. Replace any faulty cables immediately to prevent signal loss or intermittent operation.

Trikčių šalinimas

If you encounter issues with your RM-702, refer to the following troubleshooting tips:

• Nėra galios:
  • Verify that the intercom line is properly connected and active. The RM-702 is powered by the intercom line.
  • Check the power supply of the main intercom system.
• No Audio (Headset/Speaker):
  • Ensure the headset is securely plugged into the front panel connector.
  • Check that the correct channel(s) are selected and the 'Talk' button is engaged when speaking.
  • Verify that the intercom line connections are secure at both the RM-702 and the main system.
  • Reguliuokite ausinių garsumo valdiklius.
• Feedback or Distortion:
  • Ensure the speaker 'dipping' circuit is functioning correctly (speaker volume should reduce when mic is active).
  • Adjust microphone gain settings on the main intercom system if available.
  • Check for proper microphone placement to avoid picking up speaker audio.
• Program Audio Not Heard:
  • Verify the DB-15 program audio connection on the rear panel.
  • Ensure the program audio source is active and sending a signal.
  • Check IFB settings on the main intercom system.

If these steps do not resolve the issue, contact Clear-Com technical support for further assistance.

Specifikacijos

Garantija ir palaikymas

For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Clear-Com website. For technical support, service, or replacement parts, please contact Clear-Com customer service directly. Ensure you have your product model number (RM-702) and serial number available when contacting support.