1. Įvadas
The EHEIM Experience 250 is an external filter designed for freshwater aquariums ranging from 120 to 250 liters. This filter provides efficient mechanical, biological, and chemical filtration to maintain optimal water quality for your aquatic inhabitants. Its quiet operation and user-friendly design make it a reliable choice for aquarium enthusiasts.
This manual provides essential information for the safe and effective installation, operation, and maintenance of your EHEIM Experience 250 external filter. Please read all instructions carefully before use and retain this manual for future reference.
2. Saugos instrukcijos
- Always disconnect the filter from the power supply before performing any maintenance, cleaning, or installation tasks.
- Ensure that the filter is placed below the water level of the aquarium to allow for proper water flow and priming.
- Do not operate the filter if the power cord or plug is damaged. Contact qualified personnel for repair.
- This appliance is intended for use with freshwater aquariums only.
- Laikyti vaikams nepasiekiamoje vietoje.
- Ensure all connections are secure and leak-free before powering on the unit.
3. Pakuotės turinys
Išpakuodami patikrinkite, ar yra visi komponentai ir ar jie nepažeisti. Pakuotėje turėtų būti:
- EHEIM Experience 250 Filter Unit
- Hose Adapter with Integrated Shut-off Valves
- Inlet Pipe with Strainer
- Outlet Pipe (Spray Bar)
- Hoses (2x)
- Suction Cups and Clips for Hose Mounting
- Filter Media Baskets (pre-filled with filter media)
- Instrukcijų vadovas
Image 1: EHEIM Experience 250 filter unit with all accessories, including hoses, inlet/outlet pipes, and suction cups.
4. Sąranka
- Prepare the Filter Media: Open the filter head by releasing the locking clips. Remove the filter baskets. Rinse any new filter media (e.g., sponges, ceramic rings) thoroughly under tap water to remove dust. Arrange the media in the baskets according to the manufacturer's recommendations (typically coarse mechanical at the bottom, fine mechanical/biological in the middle, chemical at the top).
- Assemble Inlet and Outlet Pipes: Attach the strainer to the inlet pipe and the spray bar to the outlet pipe. Use the provided suction cups and clips to secure these pipes inside your aquarium. Position the inlet pipe near the bottom of the aquarium and the outlet pipe near the surface for optimal water circulation.
- Sujunkite žarnas: Cut the hoses to the appropriate length, ensuring they are long enough to reach the filter unit without kinks. Connect one hose to the inlet pipe and the other to the outlet pipe inside the aquarium.
- Attach Hoses to Filter Head: Connect the hoses from the aquarium to the hose adapter on the filter head. Ensure the "IN" hose from the aquarium's inlet pipe connects to the "IN" port on the adapter, and the "OUT" hose from the aquarium's outlet pipe connects to the "OUT" port. Secure the hoses with the provided clamps.
- Secure Filter Head: Place the filter baskets back into the filter unit. Ensure the sealing gasket is correctly seated on the filter head. Carefully place the filter head onto the filter canister and secure it by engaging all locking clips firmly.
- Filtro padėtis: Place the filter unit on a stable surface below the aquarium's water level. This is crucial for the filter to prime correctly and operate efficiently.
Image 2: Detail of the hose adapter on the filter head, indicating 'IN' and 'OUT' connections and valve levers.
5. Operacinis
- Fill the Filter with Water: Before connecting to power, ensure the filter is filled with water. Open both shut-off valves on the hose adapter. Water from the aquarium will flow into the filter by gravity. You may need to gently tilt the filter or use a priming aid (if available on your model) to remove air. Wait until water flows out of the outlet hose back into the aquarium, indicating the filter is full and primed.
- Prijunkite prie maitinimo: Once the filter is fully primed and all connections are secure and leak-free, plug the power cord into a suitable electrical outlet. The pump will start, and water will begin circulating through the filter.
- Check for Leaks and Air: Observe the filter and hoses for any leaks. Listen for unusual noises, which may indicate trapped air. If air is present, gently tilt the filter unit to help release it.
- Adjust Flow (if applicable): Some models may have flow adjustment. Refer to specific instructions for your model if you wish to adjust the water flow rate.
6. Priežiūra
Regular maintenance is crucial for the longevity and efficiency of your EHEIM Experience 250 filter.
6.1. Cleaning the Filter Media
- Atjunkite maitinimą: Always unplug the filter from the power outlet.
- Uždaryti vožtuvai: Close both shut-off valves on the hose adapter to prevent water from flowing out of the aquarium.
- Remove Hose Adapter: Disconnect the hose adapter from the filter head by lifting the locking handle.
- Transport Filter: Carefully carry the filter unit to a sink or bucket.
- Open Filter: Release the locking clips and remove the filter head.
- Švari žiniasklaida: Remove the filter baskets. Rinse mechanical filter media (sponges, pads) in old aquarium water (not tap water) to preserve beneficial bacteria. Replace fine filter floss as needed. Biological media should only be gently rinsed if heavily clogged, again using old aquarium water.
- Clean Canister and Head: Clean the inside of the filter canister and the impeller chamber in the filter head. Ensure the impeller is free of debris.
- Surinkti iš naujo: Reassemble the filter in reverse order. Ensure the O-ring on the filter head is clean and properly seated before securing the head with the clips.
- Paleisti iš naujo: Reconnect the hose adapter, open the valves, and prime the filter as described in the "Operating" section before plugging it back in.
6.2. Hose Cleaning
Hoses can accumulate biofilm over time, reducing flow. Clean hoses periodically (e.g., every 6-12 months) using a flexible hose brush. Disconnect hoses from both the filter and the aquarium for thorough cleaning.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Filter not starting / No water flow |
|
|
| Sumažintas vandens srautas |
|
|
| Loud noise / Vibrations |
|
|
| Lekia |
|
|
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelis | EHEIM Experience 250 |
| Prekės modelio numeris | 2424020 |
| Tinka akvariumams | 120 - 250 Liters (Freshwater) |
| Siurblio galia | 700 l/h |
| Max Water Lift | 1.5 m |
| Energijos suvartojimas | 8 vatų |
| Filtro tūris | 3 L |
| Gaminio matmenys (I x P x A) | 89 x 70 x 70 cm (Note: This dimension seems unusually large for a filter of this capacity, likely refers to packaging or a different product. The description states 340x178x178 mm which is more plausible for the filter unit itself. I will use the description's dimension for the filter unit and note the discrepancy.) |
| Filter Unit Dimensions (H x W x D) | 340 x 178 x 178 mm (13.4 x 7 x 7 colio) |
| Produkto svoris | 1 kilogramai |
| Gamintojas | Eheimas |
Note: Product dimensions from specifications (89 x 70 x 70 cm) appear to be incorrect or refer to packaging. The filter unit dimensions (340 x 178 x 178 mm) are derived from the product description and are more representative of the actual filter size.
9. Garantija ir palaikymas
For warranty information, technical support, or replacement parts, please refer to the official EHEIM website or contact your local EHEIM dealer. Keep your proof of purchase for warranty claims.
Official EHEIM Websvetainė: www.eheim.com
