Įvadas ir saugos informacija
Thank you for choosing the Bestron Sweet Dreams Ceramic Kettle. This manual provides important information for the safe and efficient use of your appliance. Please read these instructions carefully before first use and keep them for future reference.
Svarbios saugos priemonės:
- Visada įsitikinkite, kad virdulys pastatytas ant stabilaus, lygaus ir karščiui atsparaus paviršiaus.
- Do not immerse the kettle or its base in water or any other liquid.
- Prietaisą laikykite vaikams nepasiekiamoje vietoje.
- Do not operate the kettle if it is damaged or malfunctioning. Contact customer support.
- Avoid touching hot surfaces. Use the heat-insulated handle.
- Prieš pradėdami darbą, įsitikinkite, kad dangtis yra sandariai uždarytas.
- Do not fill above the maximum water level indicator to prevent boiling water from overflowing.
- The kettle features automatic shut-off and boil-dry protection for safety.
Sąranka
- Išpakavimas: Carefully remove the kettle and its base from the packaging. Retain packaging for storage or disposal.
- Vieta: Place the power base on a dry, flat, and stable surface, away from the edge of the countertop. Ensure the power cord is not dangling.
- Pirmojo naudojimo valymas: Before first use, fill the kettle with clean water up to the maximum level. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues.
Image: The Bestron Sweet Dreams Ceramic Kettle on its 360-degree swivel power base, illustrating the rotational capability.
Naudojimo instrukcijos
- Virdulio užpildymas: Remove the kettle from its base and open the lid. Fill the kettle with the desired amount of fresh water. Do not fill below the minimum mark or above the maximum 0.8L level indicator. Close the lid securely.
- Padėjimas ant pagrindo: Place the filled kettle firmly onto its 360° swivel power base.
- Maitinimo jungtis: Plug the power cord into a suitable wall socket. The cord storage system on the base helps manage excess cable length (cable length: 79 cm).
- Įjungimas: Press the ON/OFF switch located on the kettle. An indicator light will illuminate, signifying that the kettle is heating.
- Virimo procesas: The water will quickly heat to 100°C. The kettle will automatically switch off once the water has boiled. The indicator light will turn off.
- Pilimas: Carefully lift the kettle from its base using the heat-insulated handle and pour the hot water. Always pour slowly and carefully to avoid splashes.
- Pakartotinis virimas: Jei reikia iš naujo užvirinti vandenį, palaukite kelias akimirkas, kol automatinis jungiklis bus atstatytas, prieš dar kartą paspausdami ĮJUNGIMO/IŠJUNGIMO jungiklį.
Image: The Bestron Sweet Dreams Ceramic Kettle shown in a usage scenario, alongside a cup of tea, highlighting its aesthetic design.
Priežiūra ir valymas
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Bestron kettle.
Išorės valymas:
- Visada atjunkite virdulį iš elektros tinklo ir leiskite jam visiškai atvėsti prieš valydami.
- Virdulio išorę ir maitinimo pagrindą nuvalykite minkšta,amp audinys.
- Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the ceramic surface.
Nukalkinimas:
Limescale can build up inside the kettle, especially in hard water areas, affecting performance and taste. The integrated heating element is resistant to limescale accumulation, but periodic descaling is still recommended.
- Į virdulį įpilkite vandens ir baltojo acto mišinio (pvz., 1 dalis acto ir 2 dalys vandens) arba komercinio nukalkinimo tirpalo pagal gaminio instrukcijas.
- Užvirinkite mišinį ir leiskite jam pastovėti bent 30 minučių arba ilgiau, jei apnašos stiprios.
- Empty the kettle and rinse thoroughly with fresh water several times to remove any vinegar residue or descaling solution.
- Jei reikia, pakartokite procesą.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Virdulys neįsijungia. | Neįjungtas, maitinimas išjungtastage, kettle not properly seated on base, switch not pressed. | Check power connection. Ensure kettle is correctly placed on the base. Press the ON/OFF switch firmly. Check household fuse/circuit breaker. |
| Vanduo neužverda. | Insufficient water, lid not closed, faulty heating element. | Ensure water level is above minimum. Close the lid securely. If problem persists, contact customer support. |
| Virdulys išsijungia per greitai. | Limescale buildup, boil-dry protection activated. | Descale the kettle. Ensure there is sufficient water before boiling. |
| Neįprastas vandens skonis. | New appliance residue, limescale buildup. | Perform first-use cleaning steps again. Descale the kettle. |
Specifikacijos
- Modelis: DTP800SD
- Prekinis ženklas: Bestronas
- Talpa: 0.8 litrai
- Galia: Maždaug 1785 vatų
- Medžiaga: Ceramic / Metal (Copper heating element)
- Spalva: Baltas
- Matmenys (PxPxH): 23.5 x 16 x 19 cm
- Svoris: 1.36 kg
- Ypatingos savybės: Insulated heating element, Boil-dry protection, Automatic shut-off, Cordless jug, 360° swivel base, Cord storage.
Garantija ir palaikymas
Your Bestron Sweet Dreams Ceramic Kettle DTP800SD comes with a 5 metų garantija, ensuring quality and reliability. This warranty covers manufacturing defects under normal household use.
For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official Bestron website. Please have your model number (DTP800SD) and proof of purchase ready when contacting support.
