Broan-NuTone S57769000

NuTone S57769000 Ceiling Heater Motor Instruction Manual

Modelis: S57769000

1. Įvadas

This manual provides essential information for the safe and effective installation, operation, and maintenance of the NuTone S57769000 Ceiling Heater Motor. This motor is designed as a genuine replacement part for specific NuTone fan models. Please read this manual thoroughly before proceeding with installation or use.

2. Saugos informacija

ĮSPĖJIMAS: Elektros smūgio arba sužalojimo pavojus.

3. Produktas baigtasview

The NuTone S57769000 is a genuine replacement motor specifically designed for NuTone ceiling heater and fan units. It is engineered to restore the functionality of your existing unit by replacing a worn or defective motor. This motor features a shaft for attaching a blower cage and electrical connections for power.

NuTone S57769000 Ceiling Heater Motor with wiring and two ring lugs

Figure 1: NuTone S57769000 Ceiling Heater Motor. This image shows the motor unit with its shaft, mounting screws, and electrical wiring. Note the two ring lugs for connection, not a standard two-prong plug.

NuTone S57769000 Ceiling Heater Motor from a different angle

2 pav. Kitas view of the NuTone S57769000 Ceiling Heater Motor, highlighting its compact design and connection points.

4. Suderinamumas

The S57769000 motor is compatible with the following NuTone fan and heater models:

Prieš pirkimąasing and installing, verify that your existing unit's model number is listed above to ensure proper fit and function.

5. Montavimo instrukcijos

Reikalingi įrankiai:

Diegimo žingsniai:

  1. Atjunkite maitinimą: Locate the circuit breaker or fuse that supplies power to the ceiling heater/fan unit. Turn off the power completely. Verify power is off using a multimeter if available.
  2. Prieiga prie įrenginio: Carefully remove the grille and any other covers to access the internal components of the ceiling heater/fan unit. Refer to your specific unit's manual for detailed access instructions.
  3. Seno variklio išėmimas:
    • Disconnect the electrical wires from the old motor. Note their connections for reinstallation. The S57769000 motor typically connects via two ring lugs, not a standard two-prong plug.
    • Loosen or remove any screws or clips securing the blower cage to the motor shaft. Carefully remove the blower cage.
    • Unscrew or unclip the old motor from its mounting bracket within the unit.
  4. Įdiekite naują variklį:
    • Position the new S57769000 motor into the mounting bracket. Secure it with the appropriate screws or clips.
    • Attach the blower cage to the new motor shaft. Ensure it is seated correctly and tighten the hex key screw securely. Note: Some users have reported that the flat part of the shaft for clamping may not extend far enough. Ensure the screw is tightened firmly onto the rounded part of the shaft if necessary.
    • Connect the electrical wires to the new motor's ring lugs. Ensure connections are tight and secure.
  5. Surinkite įrenginį iš naujo: Carefully replace any covers and the grille that were removed. Ensure all components are properly seated and secured.
  6. Atkurti maitinimą: Įjunkite maitinimą grandinės pertraukikliu arba saugiklių dėžute.
  7. Bandomoji operacija: Test the heater/fan unit to ensure the new motor operates correctly and quietly.

6. Operacija

Once properly installed, the NuTone S57769000 Ceiling Heater Motor operates automatically as part of your NuTone ceiling heater/fan unit. When the unit is activated, the motor will power the fan to circulate air, either for ventilation or to distribute heated air, depending on the unit's function. No direct user interaction with the motor itself is required after installation.

7. Priežiūra

Regular maintenance of your ceiling heater/fan unit helps prolong the life of the motor and ensures efficient operation. Always disconnect power before performing any maintenance.

8. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Motor does not start or run.No power to the unit; loose wiring connection; defective motor.Check circuit breaker/fuse. Verify all wiring connections are secure. If power is present and connections are good, the motor may be defective and require replacement.
Motor runs but is noisy.Dust/debris in blower cage; loose blower cage; worn motor bearings.Disconnect power and clean blower cage. Ensure blower cage is securely fastened to the shaft. If noise persists, the motor bearings may be worn, indicating a need for replacement.
Motor runs slowly or weakly.Excessive dust/debris; motor nearing end of life.Disconnect power and clean blower cage and motor area. If the issue persists, the motor may be failing and require replacement.

9. Specifikacijos

FunkcijaDetalė
Prekės ženklasBroan-NuTone
Modelio pavadinimasS57769000
Greitis100 (RPM or other unit not specified, assumed relative)
ttage120 voltų
MedžiagaVaris
Prekės svoris5.8 uncijos (apie 164 gramų)
Gaminio matmenys7 x 3 x 3 colio (apytiksliai 17.8 x 7.6 x 7.6 cm)
GamintojasQ2U LLC, formerly Davelle
UPC026715190652, 885524535562
ASINB00A5USZXY

10. Informacija apie garantiją

Specific warranty details for the NuTone S57769000 Ceiling Heater Motor are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your original NuTone ceiling heater/fan unit or contact Broan-NuTone customer support directly.

11. Pagalba klientams

If you require further assistance, have questions about installation, or need to troubleshoot an issue not covered in this manual, please contact Broan-NuTone customer support.

Broan-NuTone Official Websvetainė: www.broan-nutone.com

Please have your product model number (S57769000) and the model number of your NuTone ceiling heater/fan unit ready when contacting support.

Susiję dokumentai - S57769000

Preview „Broan-NuTone 765H80L/765H80LB“ šildytuvo ventiliatoriaus lemputės montavimo vadovas
„Broan-NuTone 765H80L“ ir „765H80LB“ šildytuvo / ventiliatoriaus / apšvietimo įrenginių įrengimo, naudojimo ir priežiūros vadovas. Sužinokite, kaip saugiai įrengti ir naudoti šį vonios kambario vėdinimo ir šildymo sprendimą.
Preview „Broan-NuTone“ modelių 120, 124, 128 registrinių šildytuvų įrengimo ir naudojimo instrukcija
Išsamus „Broan-NuTone“ 120, 124 ir 128 registrinių šildytuvų įrengimo, naudojimo, priežiūros ir garantijos vadovas. Apima saugos instrukcijas, laidų schemas ir dalių sąrašą.
Preview „ChromaComfort“ ir „Sensonic“ ventiliatoriaus / šviestuvo / garsiakalbio montavimo instrukcijos
Išsamus „ChromaComfort“ ir „Sensonic“ ventiliatoriaus / šviestuvo / garsiakalbio įrengimo vadovas, kuriame išsamiai aprašomos saugos priemonės, valymas, priežiūra, naudojimas ir nuoseklus įrengimas tiek naujiems, tiek modernizuotiems įrenginiams. Įtraukta „Bluetooth“ susiejimo ir programėlės atsisiuntimo informacija.
Preview „Broan-NuTone Economy Energy Star“ lubų / sieninio ventiliatoriaus montavimo ir naudojimo vadovas
Išsamios „Broan-NuTone Economy Energy Star“ lubinių / sieninių ventiliatorių, įskaitant 688E, 6884E, 696N ir 696NE modelius, įrengimo ir naudojimo instrukcijos. Apima saugos įspėjimus, įrengimo procedūras naujoms konstrukcijoms ir renovacijai, elektros instaliaciją, ortakius, apdailą ir priežiūrą.
Preview „Broan-NuTone 688E/696N“ lubų ir sieninių ventiliatorių montavimo vadovas
Šiame dokumente pateikiamos „Broan-NuTone Economy Energy Star“ ir ne „Energy Star“ lubinių ir sieninių ventiliatorių (688E ir 696N modeliai) montavimo instrukcijos. Jame pateikiami esminiai saugos įspėjimai, elektros laidų įrengimo instrukcijos, ortakių reikalavimai ir nuoseklios montavimo procedūros tiek naujai statomoms, tiek keičiamoms instaliacijoms.
Preview „Broan-NuTone 695“ ir „696N“ lubinių/sieninių vėdinimo įrenginių montavimo vadovas
Išsamus „Broan-NuTone 695“ ir „696N“ lubinių ir sieninių vėdinimo įrenginių montavimo vadovas. Jame pateikiami saugos įspėjimai, nuoseklios montavimo instrukcijos ir informacija apie garantiją.