Orbit 94162 Buddy Digital Automatic Watering Timer

Įvadas

The Orbit 94162 Buddy Digital Automatic Watering Timer is designed to automate garden watering tasks, providing consistent irrigation for micro-jets, drip irrigation systems, and garden sprinklers. This manual provides instructions for the proper installation, programming, operation, and maintenance of your watering timer.

Produktas baigtasview

1 pav.: priekis view of the Orbit 94162 Buddy Digital Automatic Watering Timer, showing the digital display, control buttons, and rotary dial.

This digital watering timer features a user-friendly interface with a large LCD display, intuitive control buttons, and a rotary dial for selecting various programming functions. It is equipped with a diaphragm solenoid valve for reliable and long-lasting performance.

Diegimas ir sąranka

1. Akumuliatoriaus įdėjimas

1. Ensure the timer is in the 'OFF' position.
2. Raskite baterijų skyrių laikmačio gale.
3. Open the compartment and insert two (2) AA alkaline batteries, observing the correct polarity (+/-).
4. Close the battery compartment securely. The display should illuminate.

2. Pritvirtinimas prie maišytuvo

Figure 2: The watering timer connected to a standard garden faucet with a hose attached.

1. Thread the timer onto any standard outdoor garden faucet. Hand-tighten only. Do not use tools.
2. Attach your garden hose or irrigation system to the outlet of the timer.
3. Turn on the faucet completely. The timer is designed to operate with full water pressure.

Svarbu: When freezing temperatures are expected, timers must be removed from hose faucets to prevent potential freezing damage.

Programavimas ir valdymas

3 pav. Iš arti view of the timer's rotary dial and digital display, showing various programming options.

The timer features a rotary dial with several settings for easy programming:

• NUSTATYTI LAIKRODĮ: Sureguliuokite dabartinį laiką.
• PRADŽIOS LAIKAS: Set the desired time for watering to begin.
• KIEK ILGAI: Determine the duration of each watering cycle.
• KAIP DAZNAI: Specify the frequency of watering cycles.
• AUTOMATINIS: Activates the programmed watering schedule.
• IŠJUNGTA: Išjungia visą laistymą.

1. Set Current Time (SET CLOCK)

1. Pasukite ratuką į padėtį „SET CLOCK“.
2. Use the '+' and '-' buttons to adjust the hour. Press the '+' or '-' button to change the value. Hold the button for faster adjustment.
3. Press the 'MANUAL' button to switch between AM/PM.
4. Minutėms reguliuoti naudokite mygtukus „+“ ir „-“.
5. Turn the dial to the next setting or 'AUTO' to save.

2. Set Start Time (START TIME)

1. Turn the dial to 'START TIME'.
2. Use the '+' and '-' buttons to set the desired time for watering to begin.
3. Press the 'MANUAL' button to switch between AM/PM.
4. Turn the dial to the next setting or 'AUTO' to save.

3. Set Watering Duration (HOW LONG)

1. Turn the dial to 'HOW LONG'.
2. Use the '+' and '-' buttons to set the watering duration from 1 to 240 minutes.
3. Turn the dial to the next setting or 'AUTO' to save.

4. Set Watering Frequency (HOW OFTEN)

1. Turn the dial to 'HOW OFTEN'.
2. Use the '+' and '-' buttons to set the watering frequency. Options include every 6 hours, every 12 hours, or every 1 to 7 days.
3. Turn the dial to 'AUTO' to save and activate the program.

5. Automatic Operation (AUTO)

Once all settings are programmed, turn the dial to 'AUTO'. The timer will now operate according to your set schedule. The display will show the current time and the next scheduled watering cycle.

6. Rankinis valdymas

To water manually, press the 'MANUAL' button. Use the '+' and '-' buttons to set the desired manual watering duration. Press 'MANUAL' again to start watering. To stop manual watering, press 'MANUAL' again or turn the dial to 'OFF'.

7. Vėlavimas dėl lietaus

To activate a rain delay, press and hold the '+' button while the dial is in the 'AUTO' position. This will pause the watering schedule for a set period (e.g., 24, 48, 72 hours). Press the '+' button repeatedly to cycle through delay options. The timer will resume its schedule automatically after the delay period.

Priežiūra

Baterijos keitimas

Replace batteries annually or when the low battery indicator appears on the display. Always use fresh AA alkaline batteries. Remove old batteries promptly to prevent leakage.

Valymas

Clean the exterior of the timer with a damp šluoste. Nenaudokite abrazyvinių valiklių ir nemerkite įrenginio į vandenį.

Žieminimas

Before the first frost, disconnect the timer from the faucet and drain any remaining water. Store the timer indoors in a dry, protected area where temperatures will not drop below freezing. Removing batteries during storage is recommended.

Trikčių šalinimas

• Nėra vandens srauto:
  • Įsitikinkite, kad čiaupas yra visiškai atsuktas.
  • Patikrinkite akumuliatoriaus lygį ir, jei reikia, pakeiskite.
  • Verify the timer is in 'AUTO' mode or manual watering is activated.
  • Check for debris in the timer's inlet filter.
• Timer not watering at scheduled time:
  • Confirm the current time and start time are set correctly.
  • Ensure the timer is in 'AUTO' mode.
  • Patikrinkite, ar aktyvus lietaus atidėjimas.
  • Patikrinkite akumuliatoriaus įkrovą.
• Leaking from connections:
  • Ensure all connections are hand-tightened securely.
  • Check the rubber washer inside the timer's inlet for proper seating and damage. Replace if necessary.
• Ekranas tuščias arba blankus:
  • Pakeiskite baterijas naujomis AA šarminėmis baterijomis.

Specifikacijos

Informacija apie garantiją

For detailed warranty information, please refer to the manufacturer's official website or the warranty card included with your product packaging. Keep your purchase receipt as proof of purchase for any warranty claims.

Pagalba klientams

Should you require technical assistance, have questions regarding product operation, or need to report an issue, please contact Orbit customer support. Contact details can typically be found on the Orbit websvetainėje arba produkto pakuotėje.