1. Produktas baigtasview
This document provides instructions for the installation and use of the Porter Cable 5140112-36 OEM Replacement Trigger. This trigger is a genuine Porter Cable replacement part, supplied new and bulk packed, designed to restore functionality to compatible power tools.
It replaces obsolete part numbers A22746 and 849317.
Image: The Porter Cable 5140112-36 OEM Replacement Trigger, a black plastic component with electrical contacts, designed for power tools.
2. Suderinamumas
This replacement trigger is compatible with the following Porter Cable belt sander models:
- Porter Cable 352 Type 1 3x21 Belt Sander
- Porter Cable 352 Type 2 3x21 Belt Sander
- Porter Cable 352 Type 3 3x21 Belt Sander
- Porter Cable 352 Type 4 3x21 Belt Sander
- Porter Cable 352 Type 5 3x21 Belt Sander
- Porter Cable 337 Type 1 3x21 Belt Sander
- Porter Cable 336 Type 1 3x21 Belt Sander
- Porter Cable 351 Type 1 3x21 Belt Sander
- Porter Cable 351 Type 2 3x21 Belt Sander
- Porter Cable 351 Type 3 3x21 Belt Sander
- Porter Cable 351 Type 4 3x21 Belt Sander
- Porter Cable 351 Type 5 3x21 Belt Sander
- Porter Cable 352VS Type 1 3x21 Variable Speed Belt Sander
- Porter Cable 352VS Type 2 3x21 Variable Speed Belt Sander
- Porter Cable 352VS Type 3 3x21 Variable Speed Belt Sander
- Porter Cable 352VS Type 4 3x21 Variable Speed Belt Sander
- Porter Cable 352VS Type 5 3x21 Variable Speed Belt Sander
- Porter Cable 352VS Type 6 3x21 Variable Speed Belt Sander
Always consult your tool's owner's manual for proper part number identification and installation procedures specific to your model.
3. Montavimo instrukcijos
Safety Warning: Always ensure the power tool is unplugged from the power source before attempting any repairs or part replacements to prevent electric shock or injury.
A screwdriver is typically required for this replacement.
- Atjunkite maitinimą: Įsitikinkite, kad elektrinis įrankis yra atjungtas nuo elektros lizdo.
- Atviras būstas: Remove the screws that hold the two pieces of the tool's housing together. Carefully separate the housing halves.
- Seno jungiklio pašalinimas: Disconnect the wires from the old switch and remove it from the housing. Note the orientation and connection points of the wires for correct reinstallation.
- Įdiekite naują jungiklį: Place the new 5140112-36 trigger switch into the housing.
- Prijunkite laidus: Connect the wires to the new switch, ensuring they are securely attached to the correct terminals.
- Surinkite korpusą: Carefully reassemble the tool's housing, ensuring all wires are tucked away and not pinched. Secure the housing with the screws.
- Bandymo funkcionalumas: Plug in the tool and test the new trigger switch for proper on/off and variable speed operation.
4. Veikimo funkcionalumas
The Porter Cable 5140112-36 replacement trigger switch is a common component in power tools, designed for reliable operation. It is a suspension trigger switch featuring a large push button for ease of use.
This trigger handles both the on/off control and variable speed functions of your power tool, allowing for precise control during operation. Additionally, it incorporates a power-off feature that instantly reverses electrical polarity, contributing to the tool's overall safety and performance.
Video: Demonstration of a power tool trigger switch's function, illustrating its on/off, variable speed, and polarity reversal capabilities.
5. Priežiūra
The Porter Cable 5140112-36 OEM Replacement Trigger is a sealed electrical component and does not require routine maintenance. If the switch exhibits signs of wear, damage, or malfunction, it should be replaced immediately to ensure safe operation of the power tool.
6. Problemų sprendimas
If the power tool does not operate correctly after installing the new trigger switch, consider the following:
- Maitinimo jungtis: Ensure the tool is properly plugged into a functional power outlet.
- Laidų jungtys: Verify that all wires are securely connected to the correct terminals on the new switch. Loose or incorrect connections can prevent operation.
- Tool Housing: Check that the tool's housing is correctly reassembled and no wires are pinched or obstructing internal components.
- Kiti komponentai: If the switch is correctly installed and the tool still does not function, the issue may lie with another component of the power tool. Consult a qualified technician or the tool's service manual.
7. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Gamintojas | Porterio kabelis |
| Dalies numeris | 514011236 |
| Prekės svoris | 1.28 uncijos |
| Gaminio matmenys | 2 x 2 x 3.5 colio |
| Prekės modelio numeris | 514011236 |
| Prekės pakuotės kiekis | 1 |
| ASIN | B00BFDKFQU |
| Pasiekiama pirmoji data | 13 m. vasario 2013 d |
8. Garantija ir palaikymas
For warranty information regarding the Porter Cable 5140112-36 OEM Replacement Trigger, please refer to the original purchase documentation or contact the seller directly. Support for Porter Cable products can also be found on the official Porter Cable websvetainėje arba apsilankę PORTER-CABLE Store on Amazon.
