RectorSeal EZ Trap 83114 3/4 inch Condensate Trap Instruction Manual

1. Produktas baigtasview

The RectorSeal EZ Trap 83114 is a 3/4 inch light-duty condensate trap designed for HVAC systems. It ensures proper condensate management and is suitable for applications where pressure or specific code requirements are a concern. This trap features durable Schedule 40 PVC fittings and a clear U-bend for easy inspection.

1 vaizdas: Baigtaview of the RectorSeal EZ Trap system, highlighting its purpose for condensate management in HVAC systems.

2. Kas yra dėžutėje

• 3/4" EZ Trap
• Valymo šepetys

3. Svarbios pastabos

• Install in strict accordance with RectorSeal instructions and all applicable local plumbing, drainage, and electrical codes.
• Insulation is required when the trap is installed in an unconditioned space where sweating may occur.

4. Taikymo sritys ir funkcijos

Programos:

This trap is designed for HVAC systems to manage condensate where pressure or proper drainage is critical, or as required by code and equipment manufacturers.

Savybės:

• Easy maintenance and access.
• Kompaktiškas dizainas.
• Quality construction with durable Schedule 40 PVC fittings.
• Transparent trap for easy inspection and cleaning.
• Watertight red caps provide easy access for cleaning the trap and drain pan outlet.

Image 2: Product data sheet providing detailed information on the EZ Trap, including its description, important notes, applications, and kit contents.

5. Sąranka ir diegimas

Follow these steps for proper installation of the EZ Trap:

1. Dry Fit and Mark: Dry fit all components and mark the required angles for the U-Bend and Outlet Tee for proper alignment.
2. Glue Components: Apply appropriate PVC glue to components (Inlet Cross, U-Bend, Outlet Tee) using the dry fit markings as a guide. Glue the assembly into the drain pan line.
3. Prijunkite kanalizacijos liniją: Glue the main drain line into the center leg of the Outlet Tee. Ensure the drain line exits the building with at least a 5-degree downward angle for proper flow.
4. Saugūs dangteliai: Verify that all red caps are tightly secured to prevent leaks.
5. Attach Label: Affix the cleaning label as indicated for future maintenance reference.

3 pav.: Buvęs asmuoample of the RectorSeal EZ Trap installed in an HVAC system, showing its connection to the condensate drain line.

6. Operacija

The EZ Trap functions passively to create a water seal in the condensate drain line, preventing air from being drawn into or pushed out of the HVAC system. The clear U-bend allows for visual confirmation of water presence and flow.

7. Priežiūra

Regular maintenance is crucial for optimal performance and to prevent blockages.

• The clear U-bend allows for easy visual inspection of the trap for any debris or blockages.
• The watertight red caps provide convenient access points to clean the trap and the drain pan outlet.
• Use the included cleaning brush to clear any buildup within the trap.

Image 4: The RectorSeal EZ Trap kit, including the clear U-bend and the flexible cleaning brush for easy maintenance.

Image 5: Diagram illustrating various EZ Trap configurations and highlighting features like the transparent trap and watertight caps for maintenance.

8. Problemų sprendimas

No specific troubleshooting steps are provided in the product information. If you encounter issues with your EZ Trap, ensure proper installation, check for blockages, and verify that the drain line has adequate slope. Consult a qualified HVAC technician if problems persist.

9. Specifikacijos

10. Garantija

Šis produktas tiekiamas su a 3 metų ribota garantija. For more detailed information regarding the product's limited warranty, please visit the official RectorSeal websvetainę.

11. Pagalba ir kontaktinė informacija

Gamintojas:

Kanados adresas:
3255 Wyandotte St. East
Windsor, ON N8Y 1E9, Canada
Telefonas: 519-966-4901