1. Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of the Tycon Systems TP-SCPOE-1248 PoE & Solar 8A Dual Input Battery Charging Controller. This device is designed to efficiently manage power from solar panels and other DC sources to charge 12V batteries and provide regulated 48V Power over Ethernet (PoE) output, along with a 12V auxiliary output.
2. Pagrindinės savybės
- 12V 8A PWM Solar Battery Charger with 48V 30W Passive PoE out and 12V 1.5A Aux out.
- Accepts 18-57V 2A Passive PoE Input for Auxiliary Charging of Batteries.
- PoE Pinout: 4,5V+; 7,8V-, Shielded.
- Includes DIN Rail Mounting Kit for versatile installation.
- Ideal for Remote Power Systems, Surveillance, Sensors, Wireless Stations, AP/Client/Repeaters, UPS Systems, Lighting, Fences, and Gates.
3. Pakuotės turinys
Atidarę pakuotę, patikrinkite, ar visos prekės yra pakuotėje ir geros būklės:
- Tycon Systems TP-SCPOE-1248 Controller Unit
- Montavimo komplektas su DIN bėgiu
- Greito paleidimo vadovas (arba panašus dokumentas)
4. Saugos informacija
Read all instructions carefully before installation and operation. Failure to do so may result in equipment damage or personal injury.
- Užtikrinkite tinkamą vėdinimą aplink įrenginį.
- Nelaikykite įrenginio drėgmės ar ekstremalių temperatūrų veikiamo.
- Always disconnect power before making or breaking connections.
- Use appropriate wiring gauges for all connections to prevent overheating.
- Observe correct polarity for solar panel and battery connections. Reverse polarity can damage the unit.
5. Sąranka ir diegimas
The TP-SCPOE-1248 is designed for easy installation. Follow these steps for proper setup:
5.1 Fizinis įrengimas
Mount the controller in a secure, well-ventilated location, away from direct sunlight and moisture. The included DIN Rail Mounting Kit allows for convenient installation on standard DIN rails.
5.2 Ryšio schema
1 paveikslas: Priekyje view of the Tycon Systems TP-SCPOE-1248 controller. This image displays the device's front panel, featuring a green terminal block for "SOL" (Solar) and "BAT" (Battery) connections with clearly marked positive and negative terminals. To the right, there are two RJ45 Ethernet ports for PoE input and output, labeled "IN" and "POE OUT". Above the PoE output port, a small fuse holder is visible, marked "FUSE OUT Max 8A". On the far right, a vertical row of five LED indicators is present, labeled "POE", "SOL", "CHA", "LOA", and "REV", providing status feedback. The overall casing is black with ventilation grilles on the sides.
5.3 Laidų jungtys
- Baterijos prijungimas: Connect your 12V battery to the "BAT" terminals on the green terminal block. Ensure correct polarity (+ to + and - to -).
- Saulės skydo jungtis: Connect your solar panel (up to 130W) to the "SOL" terminals on the green terminal block. Observe correct polarity.
- PoE išvestis: Connect your PoE-powered device (e.g., wireless access point, IP camera) to the "POE OUT" RJ45 port. This port provides 48V Passive PoE.
- PoE Input (Optional): If auxiliary battery charging is desired from an external PoE source, connect an 18-57V 2A Passive PoE source to the "IN" RJ45 port.
- Auxiliary 12V Output: The unit also provides a 12V 1.5A auxiliary output. Refer to the product specifications for connection details if needed.
Pastaba: The PoE Pinout is 4,5V+; 7,8V-, Shielded. Ensure your PoE devices are compatible with this passive PoE standard.
6. Naudojimo instrukcijos
Once all connections are made, the TP-SCPOE-1248 will automatically begin managing power. Monitor the LED indicators for operational status:
| LED etiketė | Aprašymas |
|---|---|
| POE | Indicates Power over Ethernet output is active. |
| SOL | Indicates solar panel input is detected and active. |
| CHA | Indicates battery charging is in progress. |
| LOA | Indicates low battery voltage alarm or load disconnect. |
| REV | Indicates reverse polarity connection on solar or battery input. Immediately disconnect power if this LED is lit. |
7. Priežiūra
The TP-SCPOE-1248 is designed for reliable operation with minimal maintenance. However, periodic checks are recommended:
- Jungtys: Reguliariai tikrinkite visas laidų jungtis, kad įsitikintumėte, jog jos yra tvirtos ir be korozijos.
- Švara: Keep the unit clean and free of dust and debris to ensure proper heat dissipation. Use a soft, dry cloth for cleaning.
- Baterijos būklė: Monitor the health of your 12V battery. A failing battery can impact system performance.
- Saugiklio patikrinimas: If the PoE output is not functioning, check the 8A fuse located near the PoE output port. Replace with a fuse of the same rating if necessary.
8. Problemų sprendimas
If you encounter issues with your TP-SCPOE-1248, refer to the following common problems and solutions:
| Problema | Galima priežastis / sprendimas |
|---|---|
| Šviesos diodai nedega. |
|
| REV LED is lit. |
|
| CHA LED not lit when solar is active. |
|
| No PoE output (POE LED off). |
|
9. Specifikacijos
| Atributas | Vertė |
|---|---|
| Modelio numeris | TP-SCPOE-1248 |
| Prekės ženklas | Tycon |
| Saulės įkroviklio tipas | PWM |
| Saulės įvesties ttage | Optimized for 12V solar panels (up to 130W) |
| Baterijos tūristage | 12 V |
| Akumuliatoriaus įkrovimo srovė | 8A (maks.) |
| PoE išvestis Voltage | 48 V pasyvus PoE |
| PoE išvesties galia | 30 W (maks.) |
| PoE Pinout | 4,5V+; 7,8V-, Shielded |
| Pagalbinė išvestis | 12V 1.5A |
| PoE Input for Aux Charging | 18-57V 2A Passive PoE |
| Gaminio matmenys | 4.65 x 6.26 x 1.57 colio (11.81 x 15.90 x 3.99 cm) |
| Prekės svoris | 11 uncijos (312 gramų) |
| Spalva | Juoda |
| Gamintojas | Tycon Power Systems |
| ASIN | B00BNHZ680 |
| UPC | 633090397547 |
10. Garantija ir palaikymas
Tycon Systems products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Tycon Systems website. For technical support or inquiries, please contact Tycon Systems customer service.
Pastaba: This product is from a small business brand. Support small businesses.
