Fortinet FortiWiFi-60D Security Appliance Firewall User Manual

1. Įvadas

This manual provides instructions for the installation, configuration, and operation of the Fortinet FortiWiFi-60D Security Appliance Firewall. The FortiWiFi-60D is an enterprise-grade network appliance designed to provide comprehensive security and wireless connectivity for small to medium-sized networks. It integrates firewall, VPN, wireless access point, and other security features into a single device.

2. Saugos informacija

• Elektros sauga: Ensure the device is connected to a grounded power outlet. Use only the power adapter supplied with the unit. Do not expose the device to water or excessive humidity.
• Aplinkos sąlygos: Operate the device within the specified temperature and humidity ranges. Avoid placing the device near heat sources or in direct sunlight. Ensure adequate ventilation around the unit.
• Tinkamas tvarkymas: Do not drop or subject the device to strong impacts. Do not attempt to open the device casing; doing so will void the warranty.

3. Pakuotės turinys

Verify that your FortiWiFi-60D package contains the following items:

• Fortinet FortiWiFi-60D Security Appliance Firewall unit
• Maitinimo adapteris
• Ethernet kabelis
• Quick Start Guide (may be a separate document)

If any items are missing or damaged, contact your vendor or Fortinet support immediately.

4. Aparatūra baigtaview

The FortiWiFi-60D features various ports and indicators for network connectivity and status monitoring. Specific port configurations may vary slightly by region or revision.

4.1 Priekinis skydelis

• Maitinimo šviesos diodas: Nurodo maitinimo būseną.
• Būsenos šviesos diodas: Rodo sistemos veikimo būseną.
• WAN šviesos diodas: Indicates activity on the Wide Area Network port.
• LAN šviesos diodai: Indicate activity on the Local Area Network ports.
• „Wi-Fi“ šviesos diodas: Rodo belaidžio tinklo aktyvumą.

4.2 Galinis skydelis

• Maitinimo įvestis: Jungiamas prie maitinimo adapterio.
• WAN prievadas: Connects to your Internet Service Provider's modem or router.
• LAN prievadai: Connects to your internal network devices (computers, switches).
• USB prievadas: For external storage or 3G/4G modem connectivity.
• Konsolės prievadas: For command-line interface (CLI) access.
• Atkūrimo mygtukas: Resets the device to factory default settings (use with caution).

Figure 1: FortiWiFi-60D Security Appliance Firewall. This image illustrates the typical layout of the device, including its front panel LEDs and rear panel ports such as power, WAN, LAN, USB, and console.

5. Sąranka

5.1 Fizinis įrengimas

1. Vieta: Place the FortiWiFi-60D on a stable, flat surface or mount it in a rack (if applicable) in a well-ventilated area. Ensure sufficient space for airflow.
2. Maitinimo jungtis: Connect the power adapter to the device's power input port and then plug it into a grounded electrical outlet. The Power LED should illuminate.

5.2 Tinklo jungtis

1. WAN ryšys: Connect an Ethernet cable from your internet modem or upstream router to the WAN port on the FortiWiFi-60D.
2. LAN jungtis: Prijunkite eterneto kabelį prie vieno iš LAN ports on the FortiWiFi-60D to a computer or a network switch.

5.3 Pradinė prieiga

1. Prijunkite kompiuterį: Ensure your computer is connected to a LAN port of the FortiWiFi-60D. Configure your computer's network adapter to obtain an IP address automatically (DHCP).
2. Prieiga Web-based Manager: Atidarykite a web browser and navigate to the default IP address of the FortiWiFi-60D, typically 192.168.1.99.
3. Prisijungimas: Įveskite numatytąjį vartotojo vardą (admin) and leave the password field blank (or use the password provided on the device label). You will be prompted to create a new password upon first login.

6. Naudojimo instrukcijos

After initial setup, you can configure the FortiWiFi-60D through its web- pagrįsta valdymo sąsaja.

6.1 Accessing the FortiGate Web-based Manager

From a computer connected to the FortiWiFi-60D's LAN, open a web browser and enter the device's IP address (e.g., https://192.168.1.99). Log in with your credentials.

6.2 Pagrindinė tinklo konfigūracija

• WAN nustatymai: Configure your internet connection type (DHCP, Static IP, PPPoE) under Network > Interfaces > WAN.
• LAN nustatymai: Review or modify the LAN interface settings, including the IP address and DHCP server configuration, under Network > Interfaces > Internal.

6.3 Wireless Network Configuration (802.11ac)

The FortiWiFi-60D supports 802.11ac for high-speed wireless connectivity.

1. Eikite į „WiFi“ ir komutatoriaus valdiklis > SSID.
2. Create a new SSID or edit an existing one.
3. Konfigūruokite SSID pavadinimas (network name), Apsaugos režimas (e.g., WPA2-Personal), and set a strong Iš anksto bendrinamas raktas (slaptažodis).
4. WPS („Wi-Fi“ apsaugota sąranka): If desired, enable WPS for easy connection of compatible devices. This feature is typically found within the SSID settings.

6.4 Firewall Policies

Firewall policies control traffic flow between network interfaces.

1. Eikite į Policy & Objects > Firewall Policy.
2. Create policies to allow or deny traffic based on source, destination, service, and action. For basic internet access, ensure a policy exists to allow traffic from your internal network to the WAN interface.

6.5 Monitoring System Status

The Prietaisų skydelis suteikia pabaigąview of the system status, network activity, and security events. Detailed logs and reports are available under Prisijungti ir pranešti.

7. Priežiūra

7.1 Firmware atnaujinimai

Regularly update the device firmware to ensure optimal performance, security, and access to new features. Download firmware from the Fortinet support portal.

1. Eikite į Sistema > Firmware.
2. Įkelkite atsisiųstą programinę-aparatinę įrangą file and follow the on-screen instructions. The device will reboot during the update process.

7.2 Konfigūracijos atsarginė kopija ir atkūrimas

It is recommended to regularly back up your device configuration.

• Atsarginė kopija: Eikite į System > Configuration > Backup to save the current configuration to your computer.
• Atkurti: Naudokite System > Configuration > Restore to upload a previously saved configuration file.

7.3 Gamyklinių parametrų atkūrimo procedūra

To restore the device to its original factory settings:

• Per Web-based Manager: Eikite į System > Configuration > Reset Configuration.
• Per atstatymo mygtuką: With the device powered on, use a paperclip to press and hold the Nustatyti iš naujo button on the rear panel for approximately 10 seconds until the Status LED changes. Release the button and allow the device to reboot.

8. Problemų sprendimas

• Nėra galios: Ensure the power adapter is securely connected to both the device and a working electrical outlet. Check the Power LED.
• Nėra interneto prieigos: Verify that the WAN cable is connected correctly and the WAN LED is active. Check your ISP's modem status. Review firewall policies to ensure internet traffic is allowed.
• „Wi-Fi“ ryšio problemos: Ensure the Wi-Fi LED is active. Check your SSID settings (name, password, security mode). Try restarting the device.
• Nepavyksta pasiekti Web-based Manager: Verify your computer's IP address is in the same subnet as the FortiWiFi-60D (e.g., 192.168.1.x). Clear your browser's cache or try a different browser.

9. Specifikacijos

10. Garantija ir palaikymas

The FortiWiFi-60D Security Appliance Firewall is covered by Fortinet's standard limited warranty. For detailed warranty information, please refer to the warranty statement included with your product or visit the official Fortinet websvetainę.

For technical support, documentation, and software downloads, please visit the Fortinet Support Portal. You will need your product's serial number for registration and support services.

Fortinet palaikymas Websvetainė: https://support.fortinet.com