YSI 251401Y

YSI 251401Y DPD laisvojo chloro reagento miltelių naudotojo vadovas

For pHotoFlex and 900 Chlorine Colorimeter

1. Produktas baigtasview

The YSI 251401Y DPD Free Chlorine Reagent Powder is an EPA-approved chemical reagent designed for accurate measurement of free chlorine concentrations. This product is specifically formulated for use with YSI pHotoFlex and 900 Chlorine Colorimeter instruments, providing reliable results within a range of 0.02 to 2 mg/L. Each pack contains 100 individual 10ml volume powder packets, ensuring convenience and consistent dosing for laboratory and field applications.

YSI 251401Y DPD Free Chlorine Reagent Powder Packet

Image 1.1: A single packet of YSI 251401Y DPD Free Chlorine Reagent Powder. The label indicates "Powder Packets," "Part Number: 251401Y," "Lot Code: L 01 A," and "Exp: 01.2017." It also includes safety warnings and manufacturer contact information.

2. Safety Information and Handling

This product is intended for professional laboratory and field use only. Adherence to all safety guidelines is critical for proper and safe operation.

3. Sąranka ir paruošimas

Before beginning any measurement, ensure you have the necessary equipment and that your colorimeter is calibrated according to its specific user manual.

3.1 Required Materials (Not Included)

3.2 Reagento paruošimas

The YSI 251401Y DPD Free Chlorine Reagent is provided in pre-measured powder packets, eliminating the need for manual weighing or dilution. Each packet contains the precise amount of reagent for a 10ml sample apimtis.

4. Operating Instructions for Free Chlorine Measurement

Follow these steps for accurate free chlorine measurement using the YSI 251401Y DPD Free Chlorine Reagent Powder with a compatible YSI colorimeter.

  1. Paruoškite SampLąstelė: Rinse a clean sample cell thoroughly with deionized water, then with a small amount of the sample turi būti išbandytas.
  2. Užpildykite SampLąstelė: Užpildykite sample cell with 10 ml of the water sample to be analyzed. Ensure the sample volume is precise.
  3. Pridėti reagentą: Carefully open one YSI 251401Y DPD Free Chlorine Reagent Powder packet. Add the entire contents of the powder packet to the 10 ml sample ląstelėje.
  4. Sumaišykite: Uždenkite sample cell and invert it gently several times to dissolve the powder completely. Avoid shaking vigorously, which can introduce air bubbles. A pink color will develop if free chlorine is present.
  5. Reakcijos laikas: Allow a reaction time of approximately 1 minute for the color to fully develop. Consult your colorimeter's manual for specific reaction time recommendations.
  6. Išmatuoti: Įdėkite paruoštą s.ample cell into the YSI pHotoFlex or 900 Chlorine Colorimeter. Follow the instrument's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  7. Rezultatų įrašai: Record the measurement results immediately.
  8. Išvalyti: After measurement, empty the sample cell and rinse it thoroughly with deionized water.

Pastaba: For best results, perform measurements promptly after sample collection. The DPD method is sensitive to light and temperature; protect samples and reagents from direct sunlight and extreme temperatures.

5. Priežiūra ir sandėliavimas

Proper storage of the reagent packets is essential to maintain their integrity and ensure accurate results.

6. Problemų sprendimas

This section addresses common issues that may arise during the use of the DPD Free Chlorine Reagent.

ProblemaGalima priežastisSprendimas
No color development or faint color when chlorine is expected.
  • Expired reagent.
  • Insufficient mixing.
  • Sample pH outside optimal range.
  • Interfering substances in sample.
  • Check expiration date; use fresh reagent.
  • Ensure complete dissolution of powder.
  • Verify sample pH is within the colorimeter's specified range for DPD method.
  • Consult colorimeter manual for known interferences.
Nenuoseklūs arba nepastovūs rodmenys.
  • Netinkamas sample apimtis.
  • Užterštos sample ląstelės.
  • Oro burbuliukai sample ląstelė.
  • Colorimeter calibration issue.
  • Ensure precise 10 ml sample apimtis.
  • Thoroughly clean sample cells before each use.
  • Gently invert to mix, avoid vigorous shaking.
  • Perform colorimeter calibration as per instrument manual.

7. Specifikacijos

8. Garantija ir palaikymas

For technical support, product inquiries, or to request a Safety Data Sheet (SDS), please contact YSI directly using the information below.

YSI stands behind the quality of its products. Please refer to the official YSI website or contact customer support for detailed warranty information applicable to this reagent.

Susiję dokumentai - 251401 metai

Preview YSI 32 modelio laidumo matuoklio naudojimo instrukcija
YSI 32 modelio laidumo matuoklio naudojimo instrukcija, kurioje išsamiai aprašytas bendras aprašymas, specifikacijos, naudojimo procedūros, priežiūra ir kalibravimas.
Preview YSI Pro20/Pro20i greito paleidimo vadovas: kalibravimas ir valdymas
Glaustas YSI Pro20/Pro20i ištirpusio deguonies matuoklių kalibravimo ir naudojimo vadovas, apimantis membranų montavimą, jutiklių nustatymą, barometro ir ištirpusio deguonies kalibravimą, druskingumo kompensavimą ir matavimų atlikimą. Apima svarbiausius veikimo veiksmus ir kontaktinę informaciją.
Preview YSI 3821 buferinis tirpalas, pH 4.00, saugos duomenų lapas (SDL)
Išsamus YSI 3821 buferinio tirpalo, kurio pH 4.00, saugos duomenų lapas (SDS), kuriame išsamiai aprašyta produkto identifikacija, pavojai, sudėtis, pirmoji pagalba, tvarkymas, laikymas ir reglamentavimo informacija.
Preview YSI EcoSense DO200A/DO200M ištirpusio deguonies ir temperatūros prietaisų naudotojo vadovas
Šiame naudotojo vadove pateikiamos išsamios YSI EcoSense DO200A ir DO200M ištirpusio deguonies ir temperatūros prietaisų naudojimo, įrengimo, priežiūros ir trikčių šalinimo instrukcijos. Jame pateikiama išsami informacija apie specifikacijas, priedus ir garantijos informaciją.
Preview YSIT-1 palydovinio siųstuvo naudojimo ir priežiūros vadovas
Išsamus YSI modelio YSIT-1 palydovinio siųstuvo naudotojo vadovas, kuriame aprašomas jo veikimas, priežiūra, aparatinės įrangos sąranka ir nuosekliojo prievado komandų sąrašas. Išsami informacija apima laiko valdymą, duomenų saugojimą, GOES duomenų formatavimą, RF siųstuvo valdymą ir GPS sinchronizavimą.
Preview YSI IQ Sensor Net MIQ/CHV PLUS naudojimo vadovas
Šiame naudojimo vadove pateikiamos išsamios YSI IQ Sensor Net MIQ/CHV PLUS vožtuvo modulio instrukcijos, apimančios suslėgto oro jutiklių valymo galvučių įrengimą, nustatymus, priežiūrą ir saugos gaires.