CLOVER D1-K

CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Instruction Manual

Įvadas

Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

Svarbi saugos informacija

Naudodami elektros prietaisus, visada laikykitės pagrindinių saugos priemonių, kad sumažintumėte gaisro, elektros smūgio ir sužalojimo riziką.

Pakuotės turinys

Your CLOVER D1-K water cooler package includes:

Specifikacijos

ModelisD1-K
Produkto tipasHot and Cold Countertop Bottleless Water Dispenser
Gaminio matmenys10.7 colio pločio x 16.8 colio gylio x 17.2 colio aukščio
Produkto svorisNet: 26 lbs, Gross: 31 lbs
Produkto spalvaJuoda ir sidabrinė
Elektros110V lizdas
Šaltnešio tipasR134a
Kompresoriaus tipasLG
SertifikataiUL
Vandens temperatūraKarštas ir Šaltas
Cold Water Rate0.6 GAL of 50°F/HR
Hot Water Rate1.8 GAL of 185°F/HR
Cold Water ThermostatReguliuojama nuo 32°F iki 50°F
Karšto vandens termostatasControlled to 185°F
Built-In Filtration SystemTaip
Filtruoti gyvenimą750 galonų arba 12 mėnesiai
Įvertinta Energy StarTaip

Sąranka

1. Įdėjimas

Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.

Clover D1-K Water Cooler with dimensions labeled
Figure 1: CLOVER D1-K Water Cooler with labeled dimensions (10.7"W x 16.8"D x 17.2"H).

2. Vandentiekio linijos prijungimas

This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.

Vidinis view of the Clover D1-K water cooler showing tanks and filtration system
Figure 2: Internal components of the CLOVER D1-K, including stainless steel tanks and filter housing.

3. Initial System Flush

Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.

Naudojimo instrukcijos

1. Vandens išpylimas

The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.

Priekyje view of the Clover D1-K water cooler with hot and cold water faucets
3 pav.: priekis view of the CLOVER D1-K, highlighting the hot and cold water dispensing areas and the hot water safety lock.

2. Fast Fill Rate

The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.

Priežiūra

1. Valymas

The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp audinys.

2. Filtro keitimas

The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.

Trikčių šalinimas

If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:

Garantija

The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a 1 metų garantija dalims ir a 3 metų kompresoriaus garantija nuo pirkimo datos. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams. Ši garantija taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo sąlygomis.

Palaikymas

For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER websvetainę.

Susiję dokumentai - D1-K

Preview „Clover“ POS sistemos vadovas: programinės įrangos planai, sąranka ir trikčių šalinimas
Išsamus „Clover“ POS sistemų vadovas, apimantis programinės įrangos plano detales, įrenginių sąranką, trečiųjų šalių programų integravimą, dažniausiai pasitaikančių problemų šalinimą ir verslo operacijų valdymą.
Preview „Clover P2PE“ diegimo vadovas v5.0: saugaus mokėjimų apdorojimo vadovas
Šiame vadove pateikiamos išsamios „Clover“ taškinio šifravimo (P2PE) sprendimo įdiegimo instrukcijos. Sužinokite apie patvirtintus įrenginius, diegimą, saugumo protokolus ir trikčių šalinimą, susijusius su „Clover“ mokėjimo terminalais.
Preview „Clover P2PE“ diegimo vadovas: saugaus mokėjimo įrenginio sąranka ir saugumas
Šiame vadove pateikiamos išsamios „Clover“ taškinio šifravimo (P2PE) sprendimo įdiegimo instrukcijos, apimančios įrenginio sąranką, saugumo protokolus ir „Clover“ mokėjimo terminalų trikčių šalinimą.
Preview „Clover P2PE“ diegimo vadovas: saugaus mokėjimų apdorojimo vadovas
Šiame vadove išsamiai aprašomas „Point-to-Point“ šifravimo (P2PE) diegimas „Clover Mobile“, „Mini“ ir „Flex“ įrenginiuose, apimantis sąranką, saugumą ir PCI atitiktį saugioms mokėjimo operacijoms.
Preview „Clover Mobile“ diegimo vadovas: sąranka, aktyvinimas ir operacijos
Išsamus vadovas, kaip nustatyti, aktyvinti ir naudoti „Clover Mobile“ įrenginį mokėjimams apdoroti. Apima aparatinės įrangos sąranką, tinklo ryšį, programėlių diegimą, PIN kodo valdymą, spausdintuvo susiejimą ir operacijų tvarkymą.
Preview „Clover Mini 3“ POS sistemos specifikacijos ir funkcijos
Išsamios „Clover Mini 3“, kompaktiškos, ant stalviršio montuojamos išmaniosios POS sistemos, specifikacijos ir savybės. Įskaitant palyginimą su „Clover Mini 2“, ryšio galimybes, priedus ir mokėjimo srautą.