Įvadas
This manual provides essential information for the installation, operation, and maintenance of your Fagor Oven Control Knob, part number C18T002A6. This replacement part is designed for compatibility with Fagor oven model HF-113B and other equivalent models. Please read these instructions carefully before proceeding with installation or use to ensure proper function and safety.
Saugos informacija
WARNING: Always disconnect the appliance from the main power supply before attempting any installation, maintenance, or repair. Failure to do so can result in electric shock, injury, or death.
- Ensure the appliance is completely cool before handling any parts.
- Jei reikia, dėvėkite tinkamas asmenines apsaugos priemones, pavyzdžiui, pirštines.
- Jei abejojate dėl kurio nors žingsnio, kreipkitės į kvalifikuotą specialistą.
- Smulkias dalis laikykite vaikams nepasiekiamoje vietoje.
Pakuotės turinys
Verify that all items are present and undamaged upon opening the package.
- 1 x Fagor Oven Control Knob (Part No. C18T002A6)
- (No other accessories are typically included with this replacement part.)
Montavimo instrukcijos
Follow these steps to correctly install the replacement control knob:
- Atjunkite maitinimą: Before beginning, ensure the oven or cooktop is completely disconnected from the electrical power supply. This is a critical safety step.
- Nuimkite seną rankenėlę: Gently pull the old control knob directly off its shaft. It should slide off with moderate force. Avoid twisting or prying excessively, as this could damage the shaft.
(Image: Old control knob being pulled off the oven shaft. Alt text: Removing the old oven control knob.)
- Patikrinkite veleną: Examine the metal shaft on the oven's control panel. Ensure it is clean, free of debris, and undamaged. If there is any residue, clean it carefully.
(Image: Close-up of the oven control shaft. Alt text: Inspecting the oven control shaft.)
- Sulygiuokite naują rankenėlę: Take the new Fagor control knob (C18T002A6). Observe the shape of the opening at the back of the knob and align it with the shape of the shaft on the oven. Most shafts have a flat side or a specific notch for correct orientation.
- Įdiekite naują rankenėlę: Carefully push the new knob onto the shaft until it is firmly seated. Do not force it if it doesn't slide on easily; re-check the alignment. The knob should sit flush against the control panel without excessive play.
(Image: New control knob being pushed onto the oven shaft. Alt text: Installing the new Fagor oven control knob.)
- Bandymo funkcionalumas: Once installed, reconnect the appliance to the power supply. Gently turn the knob to ensure it rotates smoothly and engages with the oven's control mechanism. Verify that the markings on the knob align correctly with the settings on the control panel.
Note: No product images or videos were provided in the source data for this manual. The descriptions above serve as visual guidance.
Naudojimo instrukcijos
The Fagor Oven Control Knob C18T002A6 functions identically to the original knob it replaces. Refer to your oven's primary user manual for specific operating procedures, temperature settings, and cooking functions.
- Įjungimas / išjungimas: Rotate the knob to the desired setting to activate or deactivate oven functions.
- Temperature/Function Selection: Align the indicator mark on the knob with the corresponding temperature or function symbol on your oven's control panel.
- Švelnus valdymas: Always turn the knob gently. Avoid excessive force, which can damage the internal mechanism or the knob itself.
Priežiūra ir priežiūra
Tinkama priežiūra prailgins jūsų valdymo rankenėlės tarnavimo laiką ir išvaizdą.
- Valymas: To clean the knob, first ensure the oven is off and cool. Gently pull the knob off its shaft. Wash it with warm, soapy water and a soft cloth. Rinse thoroughly and dry completely before reattaching. Do not use abrasive cleaners or harsh chemicals, as these can damage the finish.
- Įdiegimas iš naujo: After cleaning, align the knob with the shaft and push it back into place firmly.
- Venkite žalos: Do not expose the knob to extreme heat or direct flame, as this can cause warping or discoloration.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Knob does not fit onto the shaft. | Incorrect alignment or incompatible part. | Ensure the knob's opening is correctly aligned with the shaft's shape. Verify that the part number C18T002A6 is correct for your oven model (e.g., HF-113B). |
| Rankenėlė atsilaisvinusi arba nestabili. | Not fully seated or damaged shaft. | Push the knob firmly onto the shaft until it clicks or is fully seated. Inspect the oven's shaft for damage; if damaged, it may require professional repair. |
| Knob does not turn or engage oven functions. | Internal oven mechanism issue or incorrect installation. | Ensure the knob is fully pushed onto the shaft. If the problem persists, the issue may be with the oven's internal control mechanism, requiring professional service. |
Specifikacijos
- Dalies numeris: C18T002A6
- Prekinis ženklas: Fagoras
- Suderinami modeliai: Fagor HF-113B (901111425), and other equivalent models.
- Equivalent References: 95 x 0627
- Produkto tipas: Oven Control Knob / Mando Horno
- Spalva: Baltas
- Svoris: Maždaug 199.58 g
- Medžiaga: (Not specified, typically plastic/metal composite)
Garantija ir palaikymas
This Fagor replacement part is typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the specific warranty information provided by your retailer or Fagor's official documentation at the time of purchase.
For technical support, warranty claims, or further assistance, please contact your original point of purchase or visit the official Fagor websvetainė, kurioje rasite klientų aptarnavimo kontaktinę informaciją.
Gamintojas: FAGORAS
Gamintojo nuoroda: C18T002A6
