ADT Commercial Ice Machine User Manual

Įvadas

Thank you for choosing the ADT Commercial Ice Machine, Model HZB-36F. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ice maker. Please read this manual thoroughly before operating the appliance and retain it for future reference.

This commercial ice machine is designed to produce up to 80 lbs of clear ice cubes daily, with a storage capacity of 20 lbs. Its compact design allows for flexible installation as an undercounter or freestanding unit.

Svarbi saugos informacija

Please read all safety warnings and instructions carefully before use to prevent potential hazards and ensure proper operation.

• Įsitikinkite, kad prietaisas yra tinkamai įžemintas.
• Nenaudokite ledo generatoriaus su pažeistu maitinimo laidu ar kištuku.
• Ventiliacijos angas laikykite laisvas nuo kliūčių.
• Šiame prietaise nelaikykite sprogių medžiagų, pvz., aerozolinių balionėlių su degiu propelentu.
• Šis prietaisas skirtas komerciniam naudojimui.
• Prieš valydami ar atlikdami techninę priežiūrą, visada atjunkite maitinimo šaltinį.
• If your drain outlet height is more than 5.9 inches, a drain pump must be configured. The drain outlet should be no further than 12 inches from the ice machine. Failure to do so may result in water leakage.

Produktas baigtasview

The ADT Commercial Ice Machine HZB-36F features a durable stainless steel exterior and an intuitive LCD control panel for ease of use.

Pagrindinės funkcijos:

• Greitas ledo gaminimas: Produces 40 clear ice cubes per cycle in 11-20 minutes, with a daily output of up to 80 lbs. Each cube weighs 9g.
• Lankstus montavimas: Dimensions of 14.96"W x 19.29"D x 33.85"H (including 1.18" adjustable feet) allow for undercounter or freestanding placement. Features a front breathing design.
• LCD ekranas: User-friendly control panel for power, delay, cleaning, and ice cube size adjustments.
• Patvarus dizainas: Stainless steel door with a full-length handle and bright blue LED interior lighting.

Sąranka ir diegimas

Proper installation is crucial for the performance and longevity of your ice machine. Please follow these steps carefully.

Išpakavimas:

1. Atsargiai nuimkite visas pakavimo medžiagas.
2. Inspect the ice machine for any shipping damage. Report any damage to your supplier immediately.
3. Ensure all accessories are present: Ice Scoop, In-Line Hose, Drain Hose.

Vietos reikalavimai:

• Padėkite ledo gaminimo aparatą ant lygaus, stabilaus paviršiaus.
• Ensure adequate ventilation around the unit. The front breathing design allows for built-in installation, but clearances should still be maintained as per local codes.
• Venkite tiesioginių saulės spindulių ar šilumos šaltinių.
• Aplinkos temperatūra turi būti nuo 10 °C (50 °F) iki 32 °C (90 °F).

Water and Drain Connections:

1. Connect the supplied in-line hose to a potable water supply. Ensure the water pressure is within the recommended range (15-80 PSI).
2. Prijunkite išleidimo žarną prie tinkamo kanalizacijos angos. Svarbu: If your drain outlet height is more than 5.9 inches, or if the drain outlet is further than 12 inches from the ice machine, a separate drain pump privalo be installed. This unit does not include a built-in drain pump.
3. Įsitikinkite, kad visos jungtys yra saugios ir nesandarios.

Elektros jungtis:

• Plug the ice machine into a dedicated, grounded 115V AC outlet.
• Nenaudokite ilginamųjų laidų ar adapterių kištukų.

Naudojimo instrukcijos

Familiarize yourself with the control panel and basic operations.

Control Panel (Refer to Figure 3):

• Maitinimo mygtukas (ĮJUNGTA/IŠJUNGTA): Paspauskite norėdami įjungti arba išjungti įrenginį.
• Laikmačio nustatymas: Allows you to set a time for the unit to turn on or off automatically.
• Ice Making Time Adjustment (+/-): Increase or decrease the ice making time to adjust ice cube size. Longer time results in larger cubes.
• Švari funkcija: Press and hold the power button for automatic cleaning.

Pradinė operacija:

1. After connecting water and power, press the Power button to turn on the unit.
2. The ice making process will begin automatically. The first few cycles may produce smaller or irregular ice cubes. This is normal.
3. Allow the unit to run for several hours to stabilize ice production.

Ice Making Reservation:

The unit supports setting a reservation time for ice making, allowing you to schedule when the ice production starts or stops.

Priežiūra ir valymas

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your ice machine.

Kasdienė priežiūra:

• Išorę nuvalykite minkšta, damp audinys.
• Ensure the ice scoop is clean and stored hygienically.

Savaitinis/dvigubas valymas:

• Ištuštinkite ledo laikymo dėžę ir išvalykite ją švelniu plovikliu ir šiltu vandeniu. Kruopščiai išskalaukite.
• Clean the water reservoir and ice making components.

Automatinio valymo funkcija:

The ice machine is equipped with an auto-cleaning feature for convenience.

1. Ensure the ice bin is empty.
2. Add a small amount of ice machine cleaner (food-grade) to the water reservoir as per cleaner instructions.
3. Press and hold the "Clean" button (often integrated with the Power button, refer to Figure 3) to activate the auto-cleaning cycle.
4. Once the cycle is complete, drain the cleaning solution and rinse the unit thoroughly with fresh water by running several ice-making cycles and discarding the ice.

Kondensatoriaus valymas:

Periodically clean the condenser coils to ensure efficient operation. This should be done by a qualified technician or by following specific instructions in a more detailed service manual.

Trikčių šalinimas

Prieš kreipdamiesi į klientų aptarnavimo tarnybą, peržiūrėkite toliau pateiktą lentelę, kurioje pateikiamos dažniausiai pasitaikančios problemos ir jų sprendimai.

Specifikacijos

Garantija ir klientų aptarnavimas

For warranty information, please refer to the warranty card included with your product or contact ADT customer support directly. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact ADT customer support. Contact details can typically be found on the manufacturer's websvetainėje arba ant produkto pakuotės.

For the latest information and support, please visit the official ADT websvetainėje arba susisiekite su jų klientų aptarnavimo linija.