Frigidaire 137108000 Drain Pump Instruction Manual

1. Įvadas

This manual provides essential information for the proper installation, operation, and maintenance of your Frigidaire 137108000 Drain Pump. This genuine replacement part is designed for use in washing machines to effectively remove water during the drain cycle. Please read these instructions carefully before proceeding with installation or any service to ensure safe and correct usage.

2. Saugos informacija

ĮSPĖJIMAS: To reduce the risk of electric shock, fire, or injury to persons, read all instructions before installing or servicing this appliance part.

• Always disconnect the appliance from the power supply before attempting any installation, repair, or maintenance.
• Dėvėkite tinkamas asmenines apsaugos priemones, tokias kaip pirštinės ir apsauginiai akiniai.
• Ensure all water lines are shut off and any residual water is drained before beginning work.
• Jei abejojate dėl kurios nors diegimo proceso dalies, kreipkitės į kvalifikuotą specialistą.
• Vaikus ir gyvūnus laikykite toliau nuo darbo zonos.

3. Produktas baigtasview

The Frigidaire 137108000 Drain Pump is a critical component for your washing machine's drainage system. It is responsible for pumping water out of the wash tub during the drain and spin cycles.

1 paveikslas: Priekyje view of the Frigidaire 137108000 Drain Pump. This image shows the main body and the inlet/outlet ports of the pump.

2 paveikslas: Šoninė view of the Frigidaire 137108000 Drain Pump. This view highlights the motor housing and electrical connections.

4. Montavimas

This section outlines the general steps for replacing a washing machine drain pump. Specific steps may vary depending on your washing machine model. Refer to your appliance's service manual for detailed instructions.

Reikalingi įrankiai:

• Kanalo užrakinimo replės
• Stubby screwdriver or small socket wrench set
• Bucket or shallow pan for draining water
• Rankšluosčiai
• New screw-type hose clamps (recommended over spring clamps for easier installation and better seal)

Diegimo žingsniai:

1. Atjunkite maitinimą: Ištraukite skalbimo mašiną iš elektros lizdo.
2. Išjunkite vandens tiekimą: Išjunkite karšto ir šalto vandens tiekimo vožtuvus į skalbimo mašiną.
3. Išleiskite likusį vandenį: Place a bucket or shallow pan under the drain hose and lower the hose to drain any remaining water from the tub.
4. Prieiga prie siurblio: Depending on your washer model, you may need to remove the front panel, rear panel, or tilt the machine back to access the drain pump.
5. Atjunkite žarnas: Use channel lock pliers to loosen and remove the hose clamps securing the inlet and outlet hoses to the old drain pump. Be prepared for some water spillage.
6. Atjunkite laidus: Carefully disconnect the electrical wiring harness from the old pump. Note the orientation if necessary.
7. Seno siurblio išėmimas: Unscrew any mounting screws or release clips holding the old pump in place and remove it.
8. Įdiekite naują siurblį: Position the new Frigidaire 137108000 Drain Pump in the same location and secure it with the mounting screws or clips.
9. Prijunkite žarnas: Attach the inlet and outlet hoses to the new pump. Secure them tightly with new screw-type hose clamps siekiant išvengti nuotėkio.
10. Prijunkite laidus iš naujo: Connect the electrical wiring harness to the new pump.
11. Surinkite poveržlę: Pritvirtinkite visas plokštes, nuimtas atliekant prieigą.
12. Bandomoji operacija: Turn on the water supply, plug in the washing machine, and run a short drain or rinse cycle to check for proper function and leaks.

5. Operacija

The Frigidaire 137108000 Drain Pump operates automatically as part of your washing machine's cycle. When the washer enters a drain or spin phase, the control board activates the pump to remove water from the wash tub. No manual intervention is required for its normal operation.

6. Priežiūra

Regular maintenance can extend the life of your drain pump and prevent common issues.

• Patikrinkite, ar nėra šiukšlių: Periodically inspect the drain pump filter (if accessible on your washer model) and the pump's impeller for lint, coins, socks, or other foreign objects that can obstruct flow or damage the pump.
• Clean Drain Hose: If drainage issues occur, consider purging or cleaning the drain hose to remove any blockages.
• Patikrinkite žarnas: Check the inlet and outlet hoses connected to the pump for cracks, kinks, or loose connections that could lead to leaks.

7. Problemų sprendimas

If you experience problems with your washing machine's drainage, the following troubleshooting steps may help.

Dažnos problemos ir sprendimai:

• Skalbimo mašina neišleidžia vandens:
  • Ensure the drain hose is not kinked or clogged.
  • Check the pump filter for obstructions.
  • Verify that the pump is receiving electrical power.
  • The pump impeller may be damaged or seized.
• Triukšmingas veikimas:
  • A new pump may operate with a slightly different sound than an old, failing pump. This is often normal.
  • Excessive noise could indicate debris caught in the impeller or a worn motor bearing. Disconnect power and inspect.
• Leaks Around Pump:
  • Check all hose connections to ensure they are tight and properly sealed, especially if new screw-type hose clamps were not used or tightened sufficiently.
  • Patikrinkite siurblio korpusą, ar nėra įtrūkimų ar pažeidimų.

If these steps do not resolve the issue, it may be necessary to consult a qualified appliance repair technician.

8. Specifikacijos

9. Garantija ir palaikymas

This Frigidaire genuine replacement part is covered by the manufacturer's standard warranty. For specific warranty details, claims, or technical support, please refer to the documentation provided with your original appliance or visit the official Frigidaire websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantijos tikslais.

For further assistance, you may contact Frigidaire customer service through their official channels.