Fluke 117/323 Multimeter and Clamp Meter Combo Kit Instruction Manual

1. Įvadas

This manual provides essential information for the safe and effective use of your Fluke 117 Digital Multimeter and Fluke 323 True-RMS Clamp Meter combo kit. This kit is designed for residential and commercial electricians, offering productive and effective troubleshooting capabilities.

2. Įtraukti komponentai

Your Fluke 117/323 KIT includes the following items:

Fluke 117 skaitmeninis multimetras
Fluke 323 True-RMS Clamp Metras
Bandymo laidai (raudoni ir juodi)
TPAK magnetinis pakabinamas dirželis
C115 Durable Soft Carrying Case
9V Batteries (2 included, pre-installed)

Fluke 117 skaitmeninis multimetras — Figure 1: Fluke 117 Digital Multimeter. This image shows the front view of the yellow and black Fluke 117 multimeter with its display and rotary dial.

Fluke 323 True-RMS Clamp Metras — Figure 2: Fluke 323 True-RMS Clamp Meter. This image displays the yellow and black Fluke 323 clamp meter with its red clamp jaws open, showing the display and function dial.

3. Sąranka

3.1. Akumuliatoriaus įdėjimas

The Fluke 117 and 323 meters come with 9V batteries pre-installed. If replacement is needed, refer to the detailed instructions in the full user manual for safe battery compartment access.

3.2. Bandymo laidų prijungimas

Insert the red test lead into the VΩmA jack and the black test lead into the COM jack for voltage, resistance, and continuity measurements. For current measurements with the Fluke 117, insert the red lead into the 10A FUSED jack and the black lead into the COM jack.

3.3. TPAK Magnetic Hanging Strap Assembly

The TPAK magnetic hanging strap allows for hands-free operation. Attach the strap to the back of your multimeter by sliding it into the designated slot until it clicks securely. The magnetic end can then be used to hang the meter on metal surfaces, pipes, or electrical boxes.

Fluke 117 Multimeter in an electrical panel — Figure 3: Fluke 117 Multimeter in use. The multimeter is shown attached to an electrical panel, displaying a voltage reading, with test leads connected.

3.4. Kit Overview Vaizdo įrašas

1 vaizdo įrašas: šiame vaizdo įraše pateikiamas bendrasview of the contents included in the Fluke 117/323 combo kit, demonstrating each component and its basic function.

4. Naudojimo instrukcijos

4.1. Fluke 117 Digital Multimeter

The Fluke 117 measures AC and DC voltage, as well as AC and DC amps. It features True RMS for accurate measurements on non-linear loads and low input impedance to prevent false readings due to ghost voltage. The VoltAlert™ non-contact voltage detection feature enhances safety by indicating the presence of voltage be tiesioginio kontakto.

4.2. Fluke 323 True-RMS Clamp Metras

„Fluke 323 cl“amp meter measures 400 A AC current and 600 VAC and DC voltage. It provides True RMS AC voltage and current for accurate measurements on non-linear signals. Use the clamp jaw to measure AC current by clamping it around a single conductor.

Hand using Fluke 323 Clamp Metras — Figure 5: Hand using Fluke 323 Clamp Meter. A gloved hand is shown using the Fluke 323 clamp meter to measure current on a wire within an electrical box.

4.3. Multimeter Features Video

Video 2: This video highlights key features and functionalities of the Fluke 117 True-RMS Multimeter, including its automatic AC/DC voltage detection and non-contact voltage perspėjimas.

4.4. Klamp Meter Features Video

Video 3: This video details the features of the Fluke 323 Clamp Meter, including its one-handed operation, test lead connections, and AC current measurement capabilities.

5. Priežiūra

5.1. Valymas

Nuvalykite skaitiklio korpusą reklamaamp cloth and mild detergent. Do not use abrasives or solvents. Clean the test leads by wiping them with a damp audinys.

5.2. Baterijos keitimas

When the battery indicator appears on the display, replace the 9V battery. To replace, open the battery compartment cover on the back of the meter using a screwdriver. Replace with new 9V alkaline batteries, ensuring correct polarity, then secure the cover.

5.3. Test Lead Inspection

Regularly inspect test leads for damaged insulation or exposed metal. Replace damaged leads immediately to ensure safety and accurate measurements.

6. Problemų sprendimas

If your Fluke 117/323 kit is not functioning as expected, consider the following:

Nėra ekrano / išsikrovusi baterija: Patikrinkite baterijų lygį. Jei išsikrovė, pakeiskite baterijas.
Netikslūs rodmenys: Ensure test leads are properly connected and undamaged. Verify the correct function is selected on the rotary dial. For clamp meter current measurements, ensure the clamp yra aplink vieną laidininką.
False Voltage Readings (Fluke 117): The low input impedance feature helps prevent ghost voltage readings. If readings are still suspect, ensure proper grounding.
Nėra tęstinumo pyptelėjimo: Check if the continuity function is selected and test leads are making good contact.

For further assistance, refer to the detailed troubleshooting section in the comprehensive user manual or contact Fluke customer support.

7. Specifikacijos

Funkcija	Specifikacija
Prekės ženklas	Fluke
Modelio numeris	FLUKE-117/323 KIT
Maitinimo šaltinis	Alkaline (2 x 9V batteries included)
Prekės svoris	1.76 svaro (800 gramų)
Gaminio matmenys	9 x 30.48 x 3.5 colio
Matavimo tipas	Multimetras, Clamp Metras
Matavimo tikslumas	0.5% + 2
Viršutinės temperatūros įvertinimas	752 laipsnių pagal Farenheitą
Saugos įvertinimas	UL, CSA (Canada and US), ANSI/ISA, CAN/CSA, CE, C-Tick, TUV, VDE
Naudojimas	Profesionalus

8. Informacija apie garantiją

The Fluke 117/323 Kit comes with a 2 metų garantija on material and workmanship. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included in your kit or visit the official Fluke websvetainę.

9. Pagalba klientams

For technical assistance, product inquiries, or service requests, please visit the official Fluke website or contact their customer support line. Contact information can typically be found on the Fluke websvetainėje arba dokumentuose, pateiktuose kartu su jūsų produktu.

	Fluke 323/324/325 Clamp Matuoklio naudotojo vadovas – specifikacijos ir sauga Išsamus „Fluke 323“, „324“ ir „325 Cl“ naudotojo vadovasamp Skaitikliai. Apima saugos informaciją, elektros ir mechanines specifikacijas bei naudojimo instrukcijas.
	„Fluke 381“ nuotolinio ekrano „True-rms Cl“amp Skaitiklio vartotojo vadovas Išsamus „Fluke 381“ nuotolinio ekrano „True-rms Cl“ naudotojo vadovasamp Matuoklis. Apima gaminio savybes, kintamosios/nuolatinės srovės, tūrio matavimo procedūras.tage, varža, dažnis, įjungimo srovė, priežiūra, specifikacijos ir saugos informacija. Apima išsamius diagramų ir lentelių aprašymus.
	Fluke 373 True-RMS AC Clamp Skaitiklis – techninės specifikacijos ir daugiauview Išsamūs techniniai duomenys, pagrindinės savybės, produkto aprašymasview„Fluke 373 True-RMS AC Cl“ specifikacijos ir užsakymo informacijaamp Matuoklis, skirtas kintamosios srovės iki 600 A matavimams.
	„Fluke 106/107“ delno dydžio skaitmeniniai multimetrai: techninės specifikacijos ir savybės Išsamios techninės specifikacijos, svarbiausios produkto savybės ir bendra informacija apie „Fluke 106“ ir „107“ delninius skaitmeninius multimetrus. Sužinokite apie jų elektrines specifikacijas, tikslumą, funkcijas ir pridedamą įrangą.
	Fluke 323/324/325 Clamp Skaitiklio vartotojo vadovas Išsamus „Fluke 323“, „324“ ir „325 cl“ naudotojo vadovasamp skaitikliai, išsamiai aprašantys savybes, saugos priemones, specifikacijas ir naudojimo instrukcijas tiksliems elektros matavimams atlikti.
	Fluke 305 Clamp Skaitiklio vartotojo vadovas „Fluke 305 Cl“ naudotojo vadovasamp Matuoklis, kuriame pateikiama išsami saugos informacija, gaminio specifikacijos ir naudojimo instrukcijos tiksliems elektros matavimams atlikti.

Fluke FLUKE-117/323 KIT