Įvadas
This manual provides essential instructions for the installation, operation, and maintenance of your BWT CR10 NA 10" Carbon & Resin Cartridge. Please read this manual thoroughly before installation and retain it for future reference.
Produktas baigtasview
The BWT CR10 is a specialized carbon and resin cartridge designed for water filtration systems. It is engineered to fit standard BWT NDL2 filter housings. This cartridge effectively reduces chlorine, organic chemicals, and helps in minimizing scale and scum formation in water.
Pagrindinės funkcijos:
- Chloro mažinimas: Significantly reduces chlorine content in water.
- Organic Chemical Removal: Filters out various organic chemicals for improved water quality.
- Scale and Scum Control: Aids in reducing the buildup of scale and scum.
- Standartinis pritaikymas: Designed to fit BWT NDL2 filter housings.
Specifikacijos
| Specifikacija | Detalė |
|---|---|
| Modelio numeris | CR10 |
| Nominalus srautas | Approx. 4 litres/min |
| Filtro talpa | apytiksliai 1500 litrai |
| Maksimali vandens temperatūra | 45 laipsnių C |
| Maksimalus slėgis | 5 Barai |
| Diegimo būdas | Vandentiekis |
| Prekės svoris | 1.5 svaro |
| Medžiaga | MULTI CR10 Plastic |
| Surinktas skersmuo | 63 milimetrų |
Sąranka ir diegimas
Svarbu: Installation should be performed by a qualified professional or someone with adequate plumbing experience. Always shut off the main water supply before beginning installation.
- Paruoškite sistemą: Turn off the main water supply to the area where the filter housing is located. Open a nearby faucet to relieve pressure in the lines.
- Prieigos filtro korpusas: Locate your BWT NDL2 filter housing. Depending on your setup, you may need a filter wrench to open the housing.
- Išimkite seną kasetę (jei taikoma): Carefully unscrew the filter housing sump. Remove the old cartridge and dispose of it properly.
- Švarus būstas: Clean the inside of the filter housing sump with warm, soapy water and rinse thoroughly. Inspect the O-ring for any damage; replace if necessary. Lubricate the O-ring with a food-grade silicone grease if recommended by the housing manufacturer.
- Įdėkite naują kasetę: Unwrap the new BWT CR10 cartridge. Insert the cartridge into the filter housing, ensuring it is seated correctly in the center standpipe.
- Surinkite korpusą: Carefully screw the filter housing sump back onto the cap. Hand-tighten first, then use a filter wrench for a snug fit. Per daug nepriveržkite.
- Atkurti vandens tiekimą: Slowly turn on the main water supply. Check for leaks around the filter housing.
- Skalavimo sistema: Open a nearby cold water faucet and allow water to run for several minutes (e.g., 5-10 minutes) to flush out any air and fine carbon particles from the new cartridge. The water may appear cloudy initially; this is normal and will clear.
1 paveikslas: Priekyje view of the BWT CR10 filter cartridge, showing its cylindrical shape and blue color.
Naudojimo instrukcijos
Once installed and flushed, the BWT CR10 cartridge operates automatically as water flows through your filtration system. No further user interaction is required for its daily function.
- Ensure the water pressure remains within the specified limits (Maximum Pressure: 5 Bars).
- The cartridge is designed for cold water applications; do not exceed the maximum water temperature of 45 degrees C.
2 paveikslas: Kampuotas view of the BWT CR10 filter cartridge, highlighting its overall form factor.
Priežiūra
Regular replacement of the BWT CR10 cartridge is crucial to maintain optimal water quality and system performance.
- Keitimo dažnis: It is recommended that cartridges be changed at least every nuo 3 iki 6 mėnesių, or after approximately 1500 litrų of filtered water, whichever comes first. This frequency may vary depending on local water quality and usage.
- Signs of Depletion: A noticeable decrease in water flow, a return of unpleasant tastes or odors, or a change in water clarity can indicate that the cartridge needs replacement.
- Pakeitimo procedūra: Follow the "Setup and Installation" steps (1-7) for replacing the cartridge.
3 paveikslas: Apačia view of the BWT CR10 filter cartridge, showing the inlet/outlet structure.
Trikčių šalinimas
This section addresses common issues you might encounter with your BWT CR10 cartridge.
- Sumažintas vandens srautas:
- Priežastis: Užsikimšusi filtro kasetė.
- Sprendimas: Replace the cartridge. Ensure proper installation and flushing.
- Grįžta nemalonus skonis arba kvapas:
- Priežastis: Cartridge has reached its capacity.
- Sprendimas: Pakeiskite kasetę.
- Leaks Around Filter Housing:
- Priežastis: Improperly seated O-ring, damaged O-ring, or housing not tightened correctly.
- Sprendimas: Shut off water, open housing, inspect and reseat/replace O-ring, then re-tighten housing.
- Cloudy Water After Cartridge Replacement:
- Priežastis: Air or fine carbon particles from the new cartridge.
- Sprendimas: Flush the system by running cold water for 5-10 minutes until clear. This is normal.
4 paveikslas: Į viršų view of the BWT CR10 filter cartridge, showing the internal structure and sealing surface.
Garantija ir palaikymas
Specific warranty information for the BWT CR10 NA 10" Carbon & Resin Cartridge is not provided in this manual. For warranty details, technical support, or further assistance, please contact BWT customer service or refer to the official BWT websvetainę.
Gamintojas: BWT
Dalies numeris: CR10
