1. Įvadas
This manual provides instructions for the installation, operation, and maintenance of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light is designed for indoor decorative and accent lighting applications. Please read this manual thoroughly before installation and use.
2. Saugos informacija
- Maitinimo adapteris: A 12V DC power adapter is neįtraukta and must be purchased separately. Ensure the power adapter's output voltage is exactly 12V. Using a higher voltage adapter will damage the LED strip.
- Vattage: Bendras vattage of the LED strip (18W for 16.4ft) must not exceed the maximum wattage rating of your power adapter.
- Šiluma: The LED strip operates at an extremely low heat, making it safe to touch.
- Atsparumas vandeniui: Šis produktas yra neatsparus vandeniui and intended for indoor use only. Avoid exposure to water or high humidity.
- Tvarkymas: The LED strip is flexible but fragile. Handle with care during installation to prevent tearing or damage to the PCB.
- Pjovimas: Only cut the LED strip at designated cutting marks (every 3 LEDs) to avoid damaging the circuit.
3. Pakuotės turinys
Įsitikinkite, kad pakuotėje yra visi komponentai:
- 1 x Lepro 12V LED Strip Light (16.4 ft)
- Accessories (e.g., connectors, clips - specific accessories may vary, power adapter not included)
Figure 3.1: Package Contents. Note: 12V power supply sold separately.
4. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | 4100057-WW |
| Šviesos tipas | LED Strip Light (SMD 2835) |
| Ilgis | 16.4 ft (5 metrai) |
| Šviesios spalvos | Šilta Balta |
| Spalvos temperatūra | 3000 kelvinų |
| ttage | DC 12V |
| Vattage | 18 vatų |
| Šviesos srautas | 1200 liumenų |
| Šviesos diodų skaičius | 300 |
| Pritemdomas | Ne (nereguliuojamas šviesos srautas) |
| Naudojimas viduje / lauke | Tik patalpose |
| Medžiaga | Silikonas |
| Prekės svoris | 60 gramų (2.12 uncijos) |
Energijos efektyvumas
Figure 4.1: Energy Efficiency Label. For more details, visit eprel.ec.europa.eu/qr/1056793.
5. Sąrankos instrukcijos
5.1 Komponentaiview
Figure 5.1: LED Strip Light Components. A 12V power supply is required and sold separately.
5.2 diegimo žingsniai
- Paruoškite paviršių: Ensure the surface where the LED strip will be applied is clean, dry, and smooth. Wipe the surface with a clean cloth to remove any dust or debris.
- Išmatuokite ir iškirpkite (nebūtina): If a shorter length is desired, measure the required length. The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors for a clean cut. Note: 2-pin 8mm connectors are not included if you cut the strip.
- Užtepkite juostelę: Nuimkite apsauginę plėvelę nuo lipnios juostos, esančios LED juostelės gale. Atsargiai prispauskite juostelę prie paruošto paviršiaus, užtikrindami tvirtą prigludimą per visą jos ilgį.
- Prijunkite maitinimą: Connect the LED strip to a compatible 12V DC power adapter (not included). Ensure the polarity is correct.
Figure 5.2: Installation Process: Clean surface, peel adhesive, and cut at marks.
6. Naudojimo instrukcijos
Once properly installed and connected to a 12V DC power adapter, the LED strip light will illuminate when the power adapter is plugged into an electrical outlet. This model is nėra pritemdomas and does not include a controller. To turn the lights on or off, you must control the power supply directly (e.g., by plugging/unplugging or using a switched outlet).
6.1 Product in Use
6.1 pav. Pvzample of Warm White LED Strip Light application in a living space.
Figure 6.2: Warm White 3000K LED lighting in a home environment.
6.2 Vaizdo demonstracija
Video 6.1: Warm White LED Lights Strip for Bedroom. This video demonstrates the appearance of the warm white LED strip lights in a bedroom setting.
7. Priežiūra
- Valymas: To clean the LED strip, ensure it is unplugged from the power source. Gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the strip in water.
- Tvarkymas: Avoid bending the strip sharply or applying excessive force, as this can damage the internal circuitry.
- Saugykla: If storing the LED strip, roll it loosely on its original reel or a similar circular object to prevent kinks or damage.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| LED juostelė nešviečia. | Nėra maitinimo, neteisingas garsumastage, faulty power adapter, or damaged strip. | Ensure the 12V power adapter is correctly plugged in and functioning. Verify the power adapter output is 12V DC. Check for visible damage to the strip or connections. |
| Portions of the strip are not lighting up. | Damage to a section of the strip, incorrect cutting, or faulty connection. | Inspect the unlit section for physical damage or improper cuts. Ensure any connectors used are secure. |
| Klijai nelaiko juostelės. | Surface was not clean or smooth, or adhesive has lost its stickiness. | Clean the surface thoroughly before application. For persistent issues, consider using additional adhesive clips or a stronger double-sided tape (e.g., hot glue as a temporary solution, as mentioned in customer reviews, but be aware of potential damage upon removal). |
9. Garantija ir palaikymas
9.1 Informacija apie garantiją
This Lepro LED Strip Light comes with a 2 metų garantija from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2 Pagalba klientams
For technical assistance, warranty claims, or any questions regarding your Lepro product, please contact Lepro customer support through the retailer's platform or visit the official Lepro websvetainė kontaktinei informacijai.
