Lepro 4100057-DW

Lepro 12V LED Strip Light Instruction Manual

Model: 4100057-DW

1. Įvadas

This instruction manual provides detailed guidance for the safe and effective use of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light features SMD 2835 LEDs and is 16.4 feet (5 meters) in length, emitting a daylight white light. Please read this manual thoroughly before installation and operation.

Lepro 12V LED Strip Light product packaging and coiled strip

Image 1.1: Lepro 12V LED Strip Light, 16.4ft, shown with its packaging and coiled strip.

2. Saugos informacija

3. Pakuotės turinys

Upon opening the package, verify that all components are present and undamaged. The package includes:

Pastaba: A 12V power adapter is neįtraukta ir juos reikia įsigyti atskirai.

Diagram showing the contents of the Lepro LED Strip Light package: LED strip light, box, and user manual. A note indicates the power adapter is sold separately.

Image 3.1: Illustration of package contents, highlighting the LED strip light and user manual. The power adapter is not included.

4. Sąranka ir diegimas

Norėdami tinkamai sumontuoti LED juostelę, atlikite šiuos veiksmus:

  1. Paruoškite paviršių: Ensure the installation surface is clean, dry, and smooth. Wipe the surface thoroughly to remove any dust, grease, or moisture.
  2. Išmatuokite ir iškirpkite (nebūtina): The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors to ensure a clean cut. Do not cut in any other location, nes tai pažeis juostelę.
  3. Nulupkite ir priklijuokite: Carefully peel off the protective backing from the self-adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface, ensuring good contact along its entire length.
  4. Tvirtinimas spaustukais (nebūtina): For added security, especially on textured surfaces or corners, use fixing clips (not included) to further secure the strip.
  5. Prijunkite maitinimą: Connect the LED strip to a compatible 12V DC power adapter (not included). Ensure the polarity is correct.
Three steps for easy installation of the LED strip light: wiping the surface, sticking the strip light, and using fixing clips.

Image 4.1: Visual guide for easy installation, showing surface preparation, adhesive application, and optional use of fixing clips.

Examples of flexible and cuttable LED strip light installations, including wavy patterns and under-shelf lighting.

Image 4.2: The LED strip's flexibility allows for various shapes and DIY installations.

5. Naudojimo instrukcijos

Once the LED strip is securely installed and connected to a compatible 12V DC power adapter, simply plug the power adapter into a standard electrical outlet. The LED strip will illuminate. To turn off the lights, unplug the power adapter or use an inline switch if one is integrated into your power setup.

The LED strip provides a consistent daylight white light (6000K) suitable for various indoor applications.

Bedroom illuminated with 6000K Daylight White LED strip lights, highlighting SMD2835 LEDs and 5M/300 LEDs.

5.1 pav.: pvz.ample of the 6000K Daylight White illumination provided by the LED strip.

6. Priežiūra

7. Problemų sprendimas

ProblemaGalima priežastisSprendimas
LED juostelė nešviečia.
  • Adapteris negauna maitinimo.
  • Incorrect power adapter voltage.
  • Loose connection between strip and adapter.
  • Pažeista LED juostelė.
  • Check if the power adapter is plugged into a working outlet.
  • Ensure the power adapter is 12V DC.
  • Patikrinkite, ar visos jungtys yra saugios.
  • Inspect the strip for visible damage. If damaged, replace the strip.
Dalis LED juostelės nešviečia.
  • Juostelės dalies pažeidimas.
  • Netinkamas kirpimas.
  • Inspect the non-lighting section for physical damage or improper cuts.
  • If a section was cut incorrectly, it may be permanently damaged.
Adhesive is not sticking well.
  • Paviršius nebuvo nei švarus, nei lygus.
  • Insufficient pressure applied during installation.
  • Clean the surface thoroughly and reapply.
  • Use additional fixing clips for better adhesion.

8. Specifikacijos

FunkcijaDetalė
Prekės ženklasLepro
Modelio numeris4100057-DW
Šviesos šaltinio tipasŠviesos diodas (SMD 2835)
Šviesios spalvosDienos šviesa Balta
Spalvos temperatūra6000 kelvinų
Šviesos srautas1200 liumenų
ttage12 voltų DC
Vattage16 vatų
Ilgis16.4 ft (5 metrai)
Matmenys (I x P x A)196.85 x 0.31 x 0.08 colio
MedžiagaVaris, Plastikas
Naudojimas viduje / laukeTik patalpose
Atsparumo vandeniui lygisNon-Waterproof (IP20)
Ypatingos savybėsSlim, flexible, cuttable, self-adhesive

9. Garantija ir palaikymas

For warranty information or technical support, please refer to the official Lepro websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

You can visit the Lepro store on Amazon for more products and support: „Lepro“ „Amazon“ parduotuvė

Susiję dokumentai - 4100057-DW

Preview „Lepro“ LED šviesos juostos naudotojo vadovas ir specifikacijos
„Lepro“ LED šviesos juostų (PR4100067 serijos modelis) naudotojo vadovas. Jame pateikiama informacija apie įrengimą, saugą, specifikacijas ir utilizavimą.
Preview Lepro saulės siena Lamp 640003-DW Vartotojo vadovas
„Lepro Solar Wall L“ naudotojo vadovasamp, modelis 640003-DW. Pateikiamos šio energiją taupančio apšvietimo sprendimo specifikacijos, montavimo instrukcijos ir naudojimo pastabos.
Preview Lepro saulės siena Lamp Vartotojo vadovas
„Lepro Solar Wall L“ naudotojo vadovasamp, pateikiamos įrengimo, naudojimo ir priežiūros instrukcijos. Ypatybės: reguliuojami apšvietimo kampai, judesio aptikimas ir atsparumas oro sąlygoms.
Preview Lepro saulės siena Lamp Naudotojo vadovas ir įrengimo vadovas (modelis 640003-DW)
Išsamus „Lepro Solar Wall L“ naudotojo vadovas ir montavimo instrukcijaamp (640003-DW modelis). Sužinokite apie specifikacijas, sąranką, veikimą ir priežiūrą.
Preview „Lepro“ LED lubinių šviestuvų naudotojo vadovas: montavimas ir specifikacijos
Išsamus „Lepro“ LED lubinių šviestuvų naudotojo vadovas, įskaitant modelio specifikacijas, montavimo instrukcijas, saugos informaciją ir PR1500024 bei PR1500035 serijų matmenis.
Preview „Lepro“ LED lubinių šviestuvų naudotojo vadovas ir montavimo instrukcijos
Išsamus „Lepro“ LED lubinių šviestuvų naudotojo vadovas, įskaitant PR150003, PR150004 ir PR150005 modelių montavimo instrukcijas, saugos priemones, modelio specifikacijas ir pakavimo sąrašą.