TOTOLINK iPuppy III 150Mbps Wireless Access Point User Manual

1. Įvadas

The TOTOLINK iPuppy III is a compact and versatile 150Mbps wireless device designed to provide flexible network connectivity. It supports three primary operating modes: Access Point (AP), Router, and Repeater, making it suitable for various networking needs, from converting a wired connection to wireless to extending an existing Wi-Fi signal. Its micro USB power input allows for convenient powering via a computer or a standard USB power adapter.

2. Pakuotės turinys

Prašome patikrinti, ar pakuotėje yra visi reikalingi daiktai:

• TOTOLINK iPuppy III Device
• USB kabelis
• Greito montavimo vadovas
• Interneto kabelis (Etherneto kabelis)
• Skrajutė

3. Produktas baigtasview

Susipažinkite su įrenginio prievadais ir indikatoriais.

1 paveikslas: Galinis view of the iPuppy III, highlighting the Reset/WPS button, Ethernet port, and Micro USB power input.

2 paveikslas: Į viršų view of the iPuppy III, showing the TOTOLINK logo and status indicators.

3 paveikslas: The iPuppy III held in a hand, illustrating its compact size.

4. Sąranka ir konfigūracija

This section outlines the general steps for setting up your iPuppy III. Specific configuration details will depend on the operating mode you choose.

1. Maitinimas: Connect the provided USB cable to the Micro USB Power In port on the iPuppy III and plug the other end into a computer's USB port or a USB power adapter (5V/1A recommended).
2. Pradinis prisijungimas:
   • Belaidis ryšys: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "TOTOLINK_iPuppyIII" (default SSID).
   • Laidinis: Connect one end of the Ethernet cable to the iPuppy III's Ethernet port and the other end to your computer's Ethernet port.
3. Prieiga Web Sąsaja: Atidarykite a web naršyklėje ir įveskite numatytąjį IP adresą (paprastai 192.168.1.1 or itotolink.net) į adreso juostą.
4. Prisijungimas: Įveskite numatytąjį vartotojo vardą ir slaptažodį (paprastai admin/admin or found in the Quick Installation Guide).
5. Pasirinkite veikimo režimą: Follow the on-screen wizard to select your desired operating mode (AP, Router, or Repeater) and configure its settings.

Pastaba: For detailed, step-by-step instructions for each mode, refer to the Quick Installation Guide included in your package or the full user manual available on the TOTOLINK websvetainę.

5. Veikimo režimai

The iPuppy III supports three distinct operating modes:

5.1. AP režimas (prieigos taškas)

In AP mode, the iPuppy III converts a wired internet connection into a wireless Wi-Fi network. This is ideal for locations with only wired Ethernet access, allowing wireless devices to connect.

• Connect the iPuppy III's Ethernet port to a wired network (e.g., a modem or existing router's LAN port).
• Configure the wireless network name (SSID) and password via the web sąsaja.
• Wireless devices can then connect to the new Wi-Fi network.

5.2. Maršrutizatoriaus režimas

Router mode allows the iPuppy III to act as a primary router, providing internet access to multiple devices. It supports various internet connection types:

• DHCP: Automatically obtains an IP address from your Internet Service Provider (ISP).
• PPPoE: Requires a username and password provided by your ISP (common for DSL connections).
• Statinis IP: Requires manual entry of IP address, subnet mask, gateway, and DNS servers.

Connect the iPuppy III's Ethernet port to your modem. Configure the internet connection type and wireless settings through the web sąsaja.

5.3. Kartotuvo režimas

Repeater mode extends the coverage of an existing wireless network. The iPuppy III connects to an existing Wi-Fi signal and re-broadcasts it, eliminating Wi-Fi dead zones.

• Place the iPuppy III within range of your existing Wi-Fi network.
• Prisijunkite prie web interface, select Repeater mode, and scan for available networks.
• Select your existing Wi-Fi network and enter its password.
• The iPuppy III will then extend that network's coverage.

6. Priežiūra

To ensure optimal performance and longevity of your iPuppy III:

• Laikyti švarų: Regularly clean the device with a soft, dry cloth. Avoid liquid cleaners.
• Vėdinimas: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not block ventilation holes.
• Firmware atnaujinimai: Periodically check the TOTOLINK official websvetainės, kurioje rasite programinės įrangos atnaujinimus. Atnaujinus programinę įrangą, galima pagerinti našumą, pridėti naujų funkcijų ir ištaisyti klaidas.
• Atstatyti: If the device becomes unresponsive or you forget your login credentials, you can perform a factory reset by pressing and holding the RST/WPS button for approximately 5-10 seconds while the device is powered on. This will restore all settings to their factory defaults.

7. Problemų sprendimas

If you encounter issues with your iPuppy III, try the following steps:

• Nėra galios:
  • Įsitikinkite, kad USB laidas yra tvirtai prijungtas tiek prie įrenginio, tiek prie maitinimo šaltinio.
  • Išbandykite kitą USB prievadą arba maitinimo adapterį.
• Nepavyksta pasiekti Web Sąsaja:
  • Verify your device is connected to the iPuppy III's network (wired or wireless).
  • Įsitikinkite, kad naudojate teisingą IP adresą (192.168.1.1 or itotolink.net).
  • Išvalykite naršyklės talpyklą arba išbandykite kitą naršyklę.
  • Laikinai išjunkite bet kokią užkardą ar antivirusinę programinę įrangą.
• Nėra interneto prieigos:
  • Check the connection to your modem/main router.
  • Verify the operating mode is correctly configured (AP, Router, or Repeater).
  • In Router mode, ensure your ISP settings (DHCP, PPPoE, Static IP) are correctly entered.
  • Reboot the iPuppy III and your modem/main router.
• Weak Wi-Fi Signal or Disconnections:
  • Relocate the iPuppy III to a more central location, away from obstructions and interference sources (e.g., microwaves, cordless phones).
  • If in Repeater mode, ensure it is placed within good range of the main Wi-Fi signal.
  • Patikrinkite, ar nėra programinės įrangos naujinių.
• Pamiršote slaptažodį: Perform a factory reset (see Maintenance section).

If problems persist, contact TOTOLINK technical support for further assistance.

8. Specifikacijos

9. Garantija ir palaikymas

TOTOLINK products typically come with a limited warranty. Please refer to the warranty card included in your package or visit the official TOTOLINK websvetainėje, kurioje rasite išsamias garantijos sąlygas, taikomas jūsų regionui.

For technical support, product registration, or to download the latest drivers and firmware, please visit the official TOTOLINK support website. Contact information for customer service may also be found on the product packaging or the official websvetainę.