Hunter Douglas PowerRise Remote Control User Manual

1. Įvadas

This manual provides essential information for the proper setup, operation, and maintenance of your Hunter Douglas PowerRise Remote Control (Model 2981195000). This 2-channel remote is designed to control Hunter Douglas PowerRise window blinds and coverings, offering convenient automated control.

Please read this manual thoroughly before using the remote control to ensure safe and efficient operation and to maximize the lifespan of your device.

2. Produktas baigtasview

The Hunter Douglas PowerRise Remote Control is a compact, handheld device used to operate PowerRise motorized window treatments. It features two channels, allowing control of individual or groups of blinds.

Figure 2.1: Hunter Douglas PowerRise Remote Control
This image displays the Hunter Douglas PowerRise Remote Control, a light-colored, rectangular device with a dark grey up/down button and a channel selector switch. It is shown alongside its packaging label, which indicates "Hunter Douglas TRANSMITTER TURN-KEY (2 BATTERY UNIT)" and the model number "2981195000". The label also states "MFG DATE 09242007" and "Assembled in Mexico". The remote is partially encased in clear plastic packaging.

2.1. Pagrindinės savybės

• 2 kanalų veikimas: Control up to two individual blinds or two groups of blinds independently.
• Intuityvus valdymas: Simple up and down buttons for easy operation.
• Kompaktiškas dizainas: Ergonomiškas ir lengvai valdomas.
• Maitinamas su baterijomis: Operates on standard batteries (type typically indicated in battery compartment).

3. Sąranka ir susiejimas

3.1. Akumuliatoriaus įdėjimas

The remote control requires batteries for operation. Refer to the battery compartment on the back of the remote. Ensure correct polarity when inserting batteries.

1. Locate the battery cover on the back of the remote control.
2. Slide or unclip the cover to open the battery compartment.
3. Insert the required batteries (typically AAA or similar, check markings inside compartment) ensuring the positive (+) and negative (-) terminals align correctly.
4. Saugiai uždėkite akumuliatoriaus dangtelį.

3.2. Pairing with PowerRise Blinds

To control your Hunter Douglas PowerRise blinds, the remote must be paired with the blind's motor. The pairing process may vary slightly depending on the specific PowerRise motor generation. Consult your blind's specific manual for detailed pairing instructions. General steps often include:

1. Ensure the blinds are powered and accessible.
2. Locate the programming button on the blind's motor headrail (often a small, recessed button).
3. Press and hold the programming button on the blind until it responds (e.g., jogs slightly).
4. Within a few seconds, press and hold the "UP" and "DOWN" buttons simultaneously on the remote control until the blind responds again, confirming successful pairing.
5. Test the remote control by pressing the "UP" and "DOWN" buttons to ensure the blind moves as expected.

Note: If you are pairing multiple blinds to different channels, repeat the pairing process for each channel, ensuring only the desired blind is in pairing mode.

4. Operacija

Once paired, operating your PowerRise blinds with the remote control is straightforward.

4.1. Kanalo pasirinkimas

The remote features a channel selector switch, typically labeled "1" and "2" (or similar indicators). Slide the switch to select the desired channel before operating the blinds.

• Kanalo 1: Controls blinds paired to channel 1.
• Kanalo 2: Controls blinds paired to channel 2.

4.2. Pagrindinis valdymas

• Mygtukas AUKŠTYN (▲): Press to raise the blinds. Press again to stop movement.
• Žemyn mygtukas (▼): Press to lower the blinds. Press again to stop movement.

For precise positioning, you can briefly press the UP or DOWN button to jog the blinds slightly.

5. Priežiūra

5.1. Valymas

To clean the remote control, use a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners or excessive moisture.

5.2. Baterijos keitimas

Replace batteries when the remote's performance degrades or if the indicator light (if present) signals low battery. Refer to Section 3.1 for battery installation instructions. Always dispose of old batteries responsibly according to local regulations.

6. Problemų sprendimas

If troubleshooting steps do not resolve the issue, contact Hunter Douglas customer support or a certified dealer.

7. Specifikacijos

• Modelio numeris: 2981195000
• Prekinis ženklas: Hunteris Douglasas
• Valdymo tipas: Motorized, Remote Control
• Kanalai: 2
• Maitinimo šaltinis: Batteries (type typically indicated in battery compartment)
• Medžiaga: Plastikiniai
• Matmenys: Apytiksliai 11.3 x 2.5 x 0.4 colio (28.7 x 6.35 x 1.0 cm)
• Svoris: Maždaug 1.76 uncijos (50 gramai)
• Suderinamumas: Hunter Douglas PowerRise Window Blinds and Coverings

8. Garantija ir palaikymas

8.1. Informacija apie garantiją

Hunter Douglas products are known for their quality and durability. For specific warranty details regarding your PowerRise Remote Control, please refer to the warranty documentation included with your original product purchase or visit the official Hunter Douglas webGarantijos sąlygos paprastai apima gamybos defektus tam tikrą laikotarpį.

8.2. Pagalba klientams

For further assistance, technical support, or to inquire about replacement parts, please contact Hunter Douglas customer service or your authorized Hunter Douglas dealer. Contact information can typically be found on the official Hunter Douglas websvetainėje arba pirkimo kvite.

You can visit the Hunter Douglas official websvetainėje daugiau informacijos: www.hunterdouglas.com